Virginia Panel Corporation
Virginia Panel Corporation (VPC) provides VPC provides Interconnect Solutions that enable simultaneous connection of multiple test and measurement signal types through one modular interface. Designed to accommodate signal, power, RF, thermocouple, pneumatic/vacuum, and fiber optic connector modules in multiple configurations, VPC’s innovative products meet the demands of test & measurement interconnect requirements.
- 540 932 3300
- 540 932 3369
- info@vpc.com
- 1400 New Hope Road
Waynesboro, VA 22980
United States of America
-
product
Protective Cover, 75 Module, Receiver
310113352
The Receiver Protective Cover is available and encloses your modules and contacts when the ITA is not engaged.
-
product
Coax/20-26 GHz/ 75 Ohm HD, Module, Receiver, iCon Series, 18 Position
510160114
iCon modules mount from the rear of the iCon receiver and ITA and allow installation and removal of pre-wired cable blocks. Primary mating module 510161114. (May mate with other ITA modules, as well.)
-
product
Cable Assembly, Receiver, TriPaddle, 20", 200 Pin Male LFH, M3 jackscrews
540105040105
Cable Assembly, Receiver, TriPaddle, 20", 200-Pin Male LFH, M3 jackscrews
-
product
28" Slide Kit, Fits 28"-30" Deep Racks, Supports 180 lbs
310113451
28" Slide Kit, Fits 28"-30" Deep Racks, Supports 180 lbs.Measure rack depth between mounting rails to determine the slide mounting kit that fits the rack. An extender block kit is available for mounting to racks with recessed rails.
-
product
Coax, Contact, Receiver, 75 Ohm HD, sm59/U Belden 1855A, 3 GHz
610102133
Primary mating contact 610102132. (May mate with other ITA contacts, as well.)Mechanical SpecificationsDurability 20,000 cyclesContact Material Female & Male Shield – BrassCenter Contact – BeCuContact Plating Center Conductor Shield – 30µ” Au over 100µ” NiContact Termination Center Conductor - SolderShield - CrimpInsulator PTFEMating Force 2.0 lbs max [0.91 kg]Electrical SpecificationsCharacteristic Impedance 75 ΩFrequency Range DC to 3 GHzVSWR ≤ 2.26 @ 3 GHzInsertion Loss -0.86 dB...show more -
-
product
Signal, Module, ID, CASS, 210 Position, Discrete Wiring
510114106
Module, ID, Cass, Signal, 210 Positions, Discrete Wiring
-
product
Signal, Patchcord, Receiver, 72", TriPaddle, 22 AWG, Single Ended ( 5 Amps)
7-104922000-072
Signal, Patchcord, Receiver, 72", TriPaddle, 22 AWG, Single Ended ( 5 Amps).
-
product
ITA, i1, EMI Shielded, With Protective Cover
410128102
The i1 EMI has many of the standard features of the i1, in addition to Electro-Magnetic Interference (EMI) protection. The EMI shielding effect on the i1 EMI ITA is provided by the stainless steel fibers in the removable plastic cover and threaded metal coupling adapter.
-
product
Signal, Insert, ITA, QuadraPaddle, SIM, Pass-Thru, 4 Pos, 1 Slot
510181105
Signal, Insert, ITA, QuadraPaddle, SIM, Pass-Thru, 4 Pos, 1 Slot.
-
product
Cable Assembly, 100 Pin Male SCSI to 100 Pin Male SCSI, Twisted Pair, Double Ended, 18"
515109134
Cable Assembly, 100 Pin Male SCSI to 100 Pin Male SCSI, Twisted Pair, Double Ended, 18"
-
product
Cable Assembly, Receiver, 20", Micro Power to 41-Pin FML Power Connector, for VTI EX1200-2001 Switch Module
540249010147
CBA, RCV, MicroPWR to 41-Pin J1 PWR Conn f/VTI EX1200-2001 Switch Module.
-
product
QuadraPaddle Signal
QuadraPaddle contacts are engineered for flexible interconnect options. Rated at 20,000 Cyles Rated at 5 amps continuous (1250 VAC) 2 oz. insertion force Provide 4 reliable points of contact per pin
-
product
Cable Assembly, Receiver, 20", Mini Power, 19 Pin to 4 Banana Plugs
540067010108
Cable Assembly, Receiver, 20", Mini Power, 19 Pin to 4 Banana Plugs
-
product
Vacuum, Module, ITA, 90 Series, 2 Port Positions
510108242
Primary mating module 510104260. (May mate with other Receiver modules, as well.)
Related
-
ADLINK Technology Inc.
ADLINK Technology Inc. (TAIEX:6166) leads edge computing, the catalyst for a world powered by artificial intelligence. ADLINK manufactures edge hardware and develops edge software for embedded, distributed and intelligent computing– more than 1600 customers around the world trust ADLINK for mission-critical success. ADLINK contributes to open source, robotics, autonomous, IoT and 5G standards initiatives across 24+ consortiums, driving innovation across industries. For over 25 years, with 1800+ ADLINKers and 200+ partners, ADLINK enables the technologies of today and tomorrow, advancing technology and society around the world.
-
C&H Technologies, Inc.
Founded in 1984, C&H Technologies, Inc. started as a design service company and gradually migrated to the ATE service business. C&H has nearly 100 products in VXI, PXI, IP, M Module, Ethernet and LXI. Emphasis has been on sources and carriers so as to allow the company to provide platform independent instruments.
-
CAL-AV Labs, Inc.
CAL-AV Labs, Inc. (formerly California Avionics Laboratories, Inc.) is an electronic development and production company located in Tucson, Arizona. CAL-AV has provided quality engineering solutions since 1959.
-
Chroma ATE Inc.
Founded in 1984, Chroma ATE Inc. is a world leading supplier of precision test and measurement instrumentation, automated test systems, intelligent manufacturing systems, and test & automation turnkey solutions marketed globally under the brand name "Chroma". Significant markets served by Chroma include semiconductors, photonics, LED, photovoltaics, video & color, flat panel displays, power electronics, passive components, electrical safety, green batteries, electric vehicles, thermoelectrics, automated optical inspection and intelligent manufacturing systems for ICT and cleantech industries.
-
Corelis, Inc.
Corelis is a pioneer in the rapid development of innovative IEEE-1149.x-compliant products and services in support of the JTAG/boundary-scan market. As a result of our ingenuity and contributions to the industry, a growing number of customers have been able to incorporate boundary-scan technology into their product development processes in order to gain a competitive edge in today’s marketplace.
-
Cytec Corp.
Cytec Corp. is a privately held business incorporated since 1980 and is located in Upstate New York. We offer more than 25 different standard Switching Systems and can custom design Systems that meet our clients' requirements. Engineering, manufacturing, sales and distribution are all located at our headquarters to ensure that our customers receive top quality products and that it is delivered in a timely manner. A staff of talented sales engineers work closely with our clients to make certain that requirements for each Switching System are satisfied.
-
Excalibur Systems, Inc.
Established in 1986, Excalibur Systems started with an idea, with a desire to create and achieve. We designed the first ARINC-429 interface card for the personal computer and we have not looked back since. Today, Excalibur manufactures hundreds of products for the Avionics Industry. From connectors, cables, couplers and cards to sophisticated complete systems, our commitment to customer service is legendary. Excalibur has received numerous awards, accolades and commendations for our products and more importantly for our service and support. Excalibur builds and maintains long-standing relationships with our customers, which we refer to as our "partners".
-
GEDIS GmbH
GEDIS is an international system house. The GEDIS product portfolio includes innovative test systems for in-circuit, functional and high-power testing of electronic assemblies and modules. A Rohde & Schwarz Company.
-
Marvin Test Solutions, Inc.
Marvin Test Solutions, a vertically-integrated aerospace test and measurement company, has created and delivered innovative, reliable test systems for factory, depot, intermediate, and flightline use since 1988. Our expertise delivering aerospace precision underpins our manufacturing solutions, enabling us to quickly meet customers’ requirements with high-performance products and custom turnkey systems, backed by excellent long-term customer support.
-
JTAG Technologies Inc.
We are a solutions company specializing in PCB assembly testing, fault diagnosis and device programming. We develop innovative products built upon boundary-scan (IEEE Std 1149.x) standards and supply our software and hardware products and services world-wide.
-
Keysight Technologies
Keysight empowers innovators to explore, design, and bring world-changing technologies to life. As the industry’s premier global innovation partner, Keysight’s software-centric solutions serve engineers across the design and development environment, enabling them to deliver tomorrow’s breakthroughs at speed and with reduced risk. Keysight leverages its strength as the world’s leading test and measurement provider and today enables innovators to push the boundaries of engineering by quickly solving design, emulation, and test challenges to help create the best product experiences.
-
Astronics Corporation
Astronics Corporation (NASDAQ: ATRO) serves the world’s aerospace, defense, and other mission critical industries with proven, innovative technology solutions. We work side-by-side with customers, integrating our array of power, connectivity, lighting, structure, interior, and test technologies to solve complex challenges. For 50 years, we’ve delivered creative, customer-focused solutions with exceptional responsiveness. Today global airframe manufacturers, airlines, military branches, completion centers, and Fortune 500 companies rely on the collaborative spirit and innovation of Astronics. We offer our breadth of technology solutions and services through 11 subsidiary business units and numerous award-winning product brands. Serving our customers is our first priority, and every day we honor this mission with quality, partnership, and energetic global vision.
-
Kinetic Systems, Inc.
Kinetic Systems, Inc. has been at the forefront of vibration isolation and control since its inception in 1968. Through continuing research of vibration effects on equipment and structures, Kinetic Systems, Inc. has pioneered many state-of-the-art developments in vibration isolation, damping, and structural design. KSI engineers routinely solve a wide variety of complex vibration isolation problems for customers in applications as diverse as aerospace, medical research, laser R&D, and semiconductor equipment. By continually striving for and producing a superior product, KSI has become a trusted name in academic, industrial, and government research facilities worldwide. We are totally committed to offering the very finest advanced vibration isolation and control systems and optical tables. We provide to a continually evolving range of precision applications in metrology, interferometry, laser research, semiconductor manufacturing, and virtually anywhere external vibrations adversely affect the operation of precision equipment.
-
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
-
NI
NI is a technology pioneer and leader in virtual instrumentation - a revolutionary concept that has changed the way engineers and scientists in industry, government, and academia approach measurement and automation.
-
North Atlantic Industries
Offering a portfolio of rugged embedded COTS products, including over 70 pre-integrated modules, Multifunction I/O Boards, Single Board Computers (SBCs), Systems, and Power Supplies, NAI has built a reputation for supporting the world’s most demanding defense, commercial aerospace and industrial applications.
-
Parker Hannifin Corp.
The company's products are vital to virtually everything that moves or requires control, including the manufacture and processing of raw materials, durable goods, infrastructure development and all forms of transport.
-
Pickering Interfaces Inc.
Pickering Interfaces designs and manufactures modular signal switching and simulation for use in electronic test and verification.
-
QLog Corp.
QLog Corp.(formerly Warden Tronics, Inc.), founded in June 1982, and headquartered in Hamilton, Ohio, provides a wide range of services including research, development and the production of electronic test equipment, systems and subsystems for the industrial, scientific, and defense markets.
-
RadiSys Corporation
We are a global leader in open telecom solutions and a proud member of the Reliance Industries family. We enable service providers to become digital experience providers through open and disaggregated platforms and solutions. Our end-to-end portfolio spans from digital endpoints, to open disaggregated access and core solutions, to immersive digital applications and engagement platforms. Our expert services organization delivers full lifecycle support to help service providers build and operate highly scalable, high-performance networks. “Open Radisys” is our commitment to making open telecom solutions a reality.
-
Rohde & Schwarz GmbH & Co. KG
Rohde & Schwarz is striving for a safer and connected world with its Test & Measurement, Technology Systems and Networks & Cybersecurity Divisions. The company’s leading-edge products and solutions empower industrial, regulatory and government customers to attain technological and digital sovereignty. The privately owned, Munich based company can act independently, long-term and sustainably.
-
Tektronix, Inc.
Tektronix designs and manufactures test and measurement solutions to break through the walls of complexity, and accelerate global innovation.
-
Teradyne, Inc.
Teradyne tests and helps build the world’s most innovative products. Our leading-edge testers make sure that new products work right the first time, every time. And our robotics portfolio helps manufacturers to develop and deliver new products quickly, efficiently and cost-effectively.
-
VTI Instruments Corporation
VTI Microwave, a business unit of VXI Technology, Inc. specializes in the design and manufacture of open-architecture solutions for custom microwave subsystems and broadband RF switching.
-
6TL Engineering
6TL is a pioneer in applying the modularity concept to the design of Automated Test Equipment for electronics products. FastATE® Technology is the core to developing turn-key solutions that are truly modular, scalable and flexible, and thus we help to make the job of both test engineers and budget managers much easier. Thanks to FastATE, test engineers do not have to address the recurrent tasks of every project: a 6TL module completes these tasks for them. Each module selected is a high-level block that covers a function of the ATE and works together with the rest making in the end a real modular and flexible production test solution. The resulting test solution will be easily documented and will smoothly become the standard for the production, since the standardization is in the genetics of the FastATE® Technology.
-
Textron Systems
Textron Systems has been providing innovative solutions to the defense, homeland security and aerospace communities for more than 50 years. The company is known for its unmanned aircraft systems, advanced marine craft, armored vehicles, intelligent battlefield and surveillance systems, intelligence software solutions, precision smart weapons, piston engines, test and training systems, and total life cycle sustainment and operational services.
-
ADVINT, LLC
ADVINT is a leader in design and build of automatic test systems for military and commercial applications. We are a full-service system integrator that provides hardware/software development and complete fabrication services. We supply cost-effective rapid system development with unsurpassed customer responsiveness. Consultation to complete turnkey solutions available.
-
Amplicon USA
Amplicon provide the marketplace with a wide range of advanced computer-based measurement and automation systems that can be customised, networked and bundled for easy integration, backed by a technically competent workforce with a highly developed engineering capability and a state of the art EMC test facility.
-
ARC Technology Solutions
With leadership in the test and automation industry since 1999, our team of experts, have backgrounds from top electronics, defense and manufacturing solution vendors. Although we have seen a wide gamut of challenges we understand that your most challenging manufacturing problems are unique to you or have unique requirements for your products. We have an experienced staff with multiple disciplines that can relate your problem to solutions we have worked on before, but give you the custom solutions giving you an edge in solving your challenges. Let our experience work for you and get you to a better solution faster.
-
Averna
As a global Test & Quality Solution leader, Averna partners with product designers, developers and OEMs to help them achieve higher product quality, accelerate time to market and protect their brands. Founded in 1999, Averna offers specialized expertise and innovative test, vision inspection, precision assembly and automated solutions that deliver substantial technical, financial and market benefits for clients in the automotive and EV, life-science, battery, consumer electronics, industrial, telecom, transportation, and aerospace and defense industries. Averna has offices around the world, numerous industry certifications such as ISO and is ITAR registered.
-
Ball Systems, Inc.
Ball Systems is a full-service test and automation engineering company offering a wide variety of solutions, including custom test systems and engineering services, to a broad range of industries. We provide talented specialists with applied experience and an excellent command of the tools of the trade. Above all, we partner with you to engineer answers.
-
Bloomy Controls, Inc.
Bloomy Controls, Inc., (Bloomy) provides products and services for avionics real-time test, manufacturing functional test, battery test and simulation, as well as world-class NI LabVIEW, TestStand, and VeriStand application development. Typical applications include PCBA functional test; aerospace systems integration lab (SIL) data systems; avionics and battery hardware-in-the-loop (HIL) test; and rapid development of OEM software. These products and services exemplify the world’s best professional practices. Bloomy’s quality management system conforms to the ISO 9001:2015 standard. A National Instruments (NI) Platinum Partner, Bloomy set the industry standard in LabVIEW development best practices by publishing its internal development standards in The LabVIEW Style Book (copyright © 2007, Prentice Hall).
-
Columbia Elektronik AB
COLUMBIA ELEKTRONIK AB is an expert organisation delivering complete test fixturing solutions to the Nordic electronics industry. Having pioneered the Swedish, Norwegian, Finnish and Danish markets back in 1977 we have today an absolute leadership in fixturing and test technology and enjoy a solid, major share of the market. We cover the whole spectra with testsystems, testfixtures, mass interconnect solutions and both hardware and software support and services. We design and produce both our own and vendor delivered testfixtures and mass interconnect solutions for functional and in-circuit test of electronic products and assemblies from component and PCB level to subassemblies and finished products. Columbia excels in all modern fixturing technologies – be it vacuum actuated, mechanical or pneumatic – applied to stand-alone, tester-integrated or inline fixtures.
-
Safran Data Systems India Pvt. Ltd
Safran Data Systems provides high-technology equipment and solutions for testing, telemetry, mission data management and space communications. With a high-skilled international team, we contribute to the success of our customers by offering innovation, best performance, reliability and sustainability.
-
DiagnoSYS Systems Ltd
DiagnoSYS Systems, Inc. is a provider of test solutions and services offering a full spectrum of products from board test to telecom protocol testers and automated optical inspection (AOI) equipment.
-
Digalog Systems Inc.
Digalog Systems Inc, an ISO 9001:2015-registered company, was born in 1973 as the dream of a senior aerospace electronics test engineer. Soon afterward, Digalog began development of what would be one of the first lines of fully-integrated ATE (Automatic Test Equipment) in the industry. Starting with the original Series-2000, the family evolved through the 70's, 80's, 90's, and into the new millennium with the 2010, 2020, 2030, 2040, and 2050 Test Systems. Each generation leveraged the cutting-edge technologies of its day to bring ever-higher levels of speed, reliability and versatility to the production test floor while maintaining a high degree of compatibility with its predecessors.
-
Equip-Test Kft.
Equip-Test with Global Headquarter in Budapest Metropolitan Area, Europe is a global player in manufacturing PCB test equipment. Steady investments into a complex R&D department, internal laboratory and high-tech production Plants, lead us to a global well-known brand. Our loyal and well-trained people, who give a full support to our customers, are the backbone of our success.
-
FineTest Inc.
FineTest is a manufacturer of Functional ATE and Power Supply Testers. Our systems use off the shelf lab quality instruments. We provide application software on many standard test language platforms including: National Instruments LabWindows/CVI, LabView, and TestStand, Microsoft C Sharp, and Keysight VEE. We also offer complete turn-key solutions including test fixtures and test programs. Our customers include: US Air Force, US Navy, Lockheed Martin, Raytheon, BAE, DRS, Harris, Rockwell Automation, IBM and may others.
-
Shenzhen Fulianda Technology Co., Ltd.
Shenzhen Fulianda Technology Co., Ltd. is an NI alliance business, agent, and system integrator. It mainly provides NIGPIB, NILABVIEW, NIDAQ, NI board cards, NI data acquisition cards and other products. The company has a complete set of software and hardware solutions for product testing, and its development scope includes ICT, Boundary Scan, functional testing, and system testing. The business covers Shenzhen, Guangzhou, Zhuhai, Foshan, Nanjing, Hangzhou, Xiamen, Xi'an, Chengdu, Wuhan, Chongqing, Beijing and other places.
-
G Systems, l.p.
G Systems specializes in the design and development of custom automated test, control, and data acquisition systems.
-
GOEPEL electronic GmbH
GOEPEL electronic, founded in 1991 and headquartered in Jena/Germany, is a worldwide leading vendor of innovative JTAG / Boundary Scan / IEEE 1149.x solutions, offering mature software tools in an integrated development environment, high-performance Boundary Scan controllers and accessories, as well as comprehensive product support and value adding services. The company of 150 employees maintains support and sales offices in Germany, France, the United Kingdom, the United States, and Hon Kong. An extended distribution and service network of more than 300 specialists ensures excellent local and on-site customer support for more than 6,000 worldwide system installations. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the 2004, 2006, 2007, 2008, and 2009 "Best-in-Test Award" winner can be found on the Internet at www.goepel.com.
-
JGB Consulting, Inc.
JGB is an Automatic Test Equipment Integrator headquartered in Wall NJ. JGB designs COTS (Commerical Off the Shelf) Automatic Test Systems and Test Software.
-
Konrad Technologies GmbH
Konrad Technologies' core business area is the development, design and integration of customer-specific test solutions providing customers with R&D, qualification and manufacturing of electronic products with tools to fulfill their quality goals. We excel in the development of innovative test solutions that consolidate product concept, design, electronic development and construction, manufacturing, maintenance services and the implementation of technological complex projects in the test field. Depending on customer requirements, our products range from individual system modules to fully automated turnkey systems. We specialize in providing test solutions and core technologies for electronic boards and devices that guarantee cost efficiency and provide technical benefits to all customers in the Automotive, Aerospace and Defense, Telecom, White Goods, Medical, Semiconductors, General Electronic Manufacturing and Industrial Automation industries.
-
LXinstruments GmbH
The LX instruments GmbH was originally founded in 2006 as a solution provider for all questions relating to instruments and systems of electronic measurement technology. Schwerpunktmäßg our systems are based on the LXI Standard (LAN based Extensions for Instrumentation), an open industry standard.
-
NOFFZ Computer Technik GmbH
As an owner-operated company, we’ve been developing testing and automation systems for various products from different industrial sectors since 1989. What began in the basement of a private home is today a manufacturer that is active and well-known worldwide and currently has around 200 employees. At the company headquarters in Toenisvorst near Duesseldorf and at eight other locations in Germany, the USA, China, Mexico, Hungary, and Serbia. We have an extensive partner network of leading companies, such as Anritsu, dSPACE, Keysight, NI (National Instruments), Siemens, and Rohde & Schwarz, who supplement our own expertise with their respective skills. Our intelligent solutions are established in the automobile and telecommunication sector as well as in the application areas of the IoT (Internet of Things), consumer electronics, Smart Homes, medicinal technology, and the semiconductor industry.
-
The Peak Group
Excellent reputation for the manufacture of high quality test fixtures to meet the demands of an increasingly complex ATE industry. In 1998 our manufacturing arm, Peak Production Equipment Ltd., moved into new 18,000 sq.ft. premises bringing all our manufacturing operations under one roof for the first time in ten years. Over 50 personnel now enjoy operating from spacious premises, laid out to facilitate the efficient production of quality test fixtures and equipment.
-
Qmax Test Technologies Pvt. Ltd.
Qmax, a global leader in Automated Test and diagnostic Equipment for Electronic Systems, - designs, develops and manufactures a wide range of test equipment for PCB and Semi-con test industry. These are widely used in Defense, Aerospace, Power Generation and Distribution, Transportation, Bio medical and Factory Automation where there are requirements to Test and Diagnose faults in Electronic control systems right from system level test up to component level.
-
ReMaTek
Founded in 1994 by two experts working in the electronic test field for more than 15 years, Rematek has rapidly acquired an enviable reputation in the manufacturing of test fixture. On time delivery of quality test fixtures is what has made Rematek successful through the years. And to achieve that, Rematek has developed a unique in-house process that is almost 100% automated. It includes customized software for each process in fixture production: - CAD engineering and design - CNC drilling - CNC mold manufacturing - Semi-automatic wire wrapping - 100% error free electronic testing of fixture - Real time tracking production activities system Rematek is an ISO 9001:2015 registered company. Every manufacturing step is fully documented and keep up to date by a system of document control with controlled copies. Every employee is also trained and keep up to date at all time so they can use the documentation properly.
-
SET GmbH
SET GmbH is your specialist and partner for development in the field of semiconductor test systems, HiL and functional test systems for the aerospace industry, as well as in electronics development and electronics manufacturing. We have been constantly growing since its founding in 2001 and have been part of Emerson’s Test & Measurement Business NI since 2023. In addition to our know-how, the technical skills of our employees and an authentic value system, we have been convinced since the beginning that we are making customers support and making them successful. Our renowned customers and the large number of successfully completed projects from the aviation and semiconductor industries confirm our conviction and we are always pleased to be part of these projects and successes.
-
WinSoft Inc.
Established in 1994 (U.S. owned, small business), our pool of software, electrical and mechanical engineers provides a knowledge-based resource which ensures the success of each and any project. Over the last 30 years we have been providing advanced test systems to the world's major companies for the testing of critical space, defense, medical and commercial electronic devices.
-
A1QA
As a number one provider of full-cycle quality assurance and application testing we offer a diversified package of services delivered on different complexity levels with 360° quality. We combine a well-tailored QA audit process along with innovative tools and methods to provide you with tangible results for your outstanding progress.
-
DFT - MG-Products BV
DFT, Designed for Testing. is part of MG-Products and is specialized in the delivery of functional Testfixture solutions from both MG-products and 6TL. DFT also stands for Design For Test, perhaps the most important step in the development process of your product. DFT ensures that your product can be contacted and tested efficiently and reliably.
