Showing recent results 1 - 15 of 19 products found.
-
KT-PXI-502 - Konrad Technologies GmbH
The PXI-502 Matrix from Konrad Technologies is intending to use to connect test points and measurement devices. It can be configured to 100x4 matrix or to 128x4 matrix by using different terminal blocks (see ordering information). A use without terminal block is not possible
-
KT-6000 - Konrad Technologies GmbH
We developed our standard Aerospace Test System KT-6000 "PAUL" to meet the specific requirements of the aerospace industry. The system is designed against the backdrop of its usability as a complete system tester, which can be adapted to the respective test requirements of various devices under test (DUT) using different test unit adapters (TUA). Besides standard ATE functionality, the system supports the integration of test equipment for*Acceptance Test Procedures (ATP)*Highly accelerated life testing (HALT)*Environmental Stress Screening (ESS)*High Accelerated Stress Screening (HASS)
-
Konrad Technologies GmbH
RF and wireless turnkey test solutions for high-performance measurements at microwave frequencies.This RF-system is able to test products in an 868 MHz frequency range, for example radio systems, heat-cost distributors, water and heat meters. It is designed as a semi-automatic manual work station and allows parallel placement and automatic functional test of two-times two DUTs in a tandem arrangement. To guarantee a stable measuring result, the test system has two identical RF-chambers
-
ABex - Konrad Technologies GmbH
ABex is an open system extension for PXI-based systems, adding an additional analog bus and a power bus to the system. An increased signal quality, minimized cabling efforts and an increased flexibility are the main advantages of this technology.Highlights: Standard Platform with board technological applications; Less debugging (graphical switching) ; Extension for PXI (100% PXI/PXIe compatible); Analog bus expansion for PXI (4, 8, 14, 18 slots); Signal Routing between PXI Instrumentation ; Common Interface 30 analog lines (10x differential + 10x shield); Signal Level up to 100V Power bus for supplying ABex modules ; Easy signal switching via high level programming language
-
Konrad Technologies GmbH
Systematic and efficient test and measurement solutions for automotive radarKonrad Technologies developed a system specifically to address the challenges of testing automotive radar systems. The KT-319000 automotive radar test system combines In-circuit and functional Test techniques to optimize the test procedures for performance and throughput. The Radar Test System is optimized for the manufacturing environment and can be integrated in-line in a high volume manufacturing facility or configured for manual handling.
-
Konrad Technologies GmbH
The KT Mini Sphere is a uniform light source and integral intensity detector based on the integrated sphere concept. Combined with precise current amps and photodiodes for internal adjustment it is capable of accurate intensity and color correlated temperature (CCT) control. The KT-Mini-Sphere can also reperesent light with different intensities. With our calibration and adjustment procedure we are able to allow nearly step less dimming (16bit resolution of current amps) as well as calibrations for different CCTs.
-
-
MCS-500 - Konrad Technologies GmbH
The Konrad Fine-Pitch Contacting Station MCS-500 is a state-of-the art solution for testing printed circuit boards and low temperature co-fired ceramic structures at high speed with high accuracy. This system is the answer for today's challenges in test engineering:
-
Konrad Technologies GmbH
Our platform for the semiconductor test KT-7000 FINN is based on the same hardware and software platform like the other proven test systems from Konrad Technologies. All systems share one common software and hardware architecture by using standard technologies like PXI, reconfigurable FPGA instruments and standard software tools, including LabVIEW and TestStand.
-
FXC-100 - Konrad Technologies GmbH
The FXC-100 is a highly integrated automation controller, targeted for control applications where motion control applications needs to be combined with additional communication standards, including USB 2.0, Gigabit Ethernet, HDMI, CAN, I2C. Additionally, the controller hosts analog and digital I/Os and a safety relay circuit.
-
Konrad Technologies GmbH
Camera resolution test in confined space with accessory lensThe measurement of the modulation transfer function (MTF) is a key parameter for the quality of a camera. Usually the MTF is measured at certain distances from the camera – from near field up to infinity. In order to implement this camera test into automated test equipments without compromising the distance information, we developed a compact MTF target consisting of an accessory lens on a backlight illuminated MTF test chart. The accessory lens projects the target into a virtual distance for the camera. The requirements with respect to space shrink by orders of magnitude.
-
Konrad Technologies GmbH
Based on standard PXI chassis and optionally equipped with the ABex technology, the LEON Desktop offers test engineers a flexible and cost effective test solution for desktop use or integration in customized test systems. It can easily be extended by functional test and boundary scan modules. As well as all testers of Leon Family the KT LEON Desktop is based on the multifunction card KT-PXI-501.Benefits Easy implementation Low cost Test in paralell Open Platform PXI Extrem modular
-
Konrad Technologies GmbH
The LEON Gen III Embedded PCB Tester combines classical analog in-circuit test (ICT) or manufacturing defect analysis (MDA) with additional functional test capabilities on a single PXI board. Multiple embedded testers can be configured in a single system for parallel test and high throughput.Highlights Combined test system ICT, FCT Digital test using JTAG In-system programming Open and flexible platform Small footprint Combines up to 6 instruments 2xPMU, 1xDVM, 1xHVCs 4xADC, 4x DAC High Speed Test Execution Parallel Test with max 16 modules Automated test sequencing Custom extension modules
-
Konrad Technologies GmbH
Automated In-Line Test HandlerIn high volume manufacturing we offer a standard ICT system, based on our fully automated test handler FlexCell NT. The ABex based tester is vertically integrates into the tester handler using pogo-pin based test interface board connecting without cables from the test probe to the test fixture, resulting in a high performance, low-maintenance test solution with extremely high signal integrity. The handler integrates well with industry standard board handling equipment including conveyors and short stations.
-
PXI-501 - Konrad Technologies GmbH
The PXI-501 card is a multifunction instrument that can be used for functional and in-circuit measurements.
