Showing results: 5851 - 5865 of 8598 items found.
-
Alpha Moisture Systems
The key to the operation of Alpha Moisture Systems' Portable Analysers is the unique Desiccant Dry-Down Chamber. By keeping the sensor dry between tests, the special assembly of the head ensures that the instrument is always ready for immediate use. The head assembly consists of two chambers which have a telescopic action. When the head assembly is in the 'closed' or 'Dry-Down' position, the sensor is completely surrounded by desiccant, which absorbs the remaining water moisture from the sensor and hence it is dry and ready for use. The small space at the bottom of the test chamber enables the sample pipe to be purged before the test commences without wetting the sensor. By placing a finger over the outlet of the head, the sample pressure is able to open the test chamber automatically, exposing the sensor to the gas being tested and enabling accurate reading of moisture content in the sample gas. After each test the head assembly is closed by depressing the inner section so that the sensor will again be dried by the desiccant, leaving the sensor ready for use time and time again. The desiccant is kept in the inner chamber and is not exposed to ambient room air or the sample gas, therefore there is no need for frequent regeneration or replacement of the desiccant.
-
PET-2/PET-3 -
Exatron Inc.
Exatron's Prototype Engineering Test (PET) Fixture is a semi-automated solution that bridges the gap between a fully automated handling system and a low cost, lower volume handler.
-
Kokusai Co., Ltd.
This test machine is a tire wear test device that employs an electric servomotor power circulation system.
-
3-axis -
Shinken Co. LTD.
This small 3-axis vibration test system has been developed in response to many customers' request for ?gcompact and easy to handle & use h multi-axis VTSs without sacrificing performances, featured by its small installation area of W900mm by D850mm, relatively quiet due to employment of small fans insterad of bolower(s), a displacement of 25mmp-p for each axis and max. transient acceleration of over 98m/s2<10G>*,
-
Alfamation S.p.A
Telematics and wireless test drive significant improvements in vehicle safety, comfort and user experience, as the telematics modules converge with infotainment systems.
-
TTS-030 -
F&K Physiktechnik GmbH
For the generation of unique bond links the use of high-quality components is an essential precondition. Despite all care in the production of ultrasonic transducers again and again unexpected effects occur, which only manifest themselves in the use of those transducers and which also have the reason in the transducer itself.
-
V-Meter -
James Instruments Inc.
The V-Meter is an advanced ultrasonic, pulse-velocity test system widely used for quality control and evaluation of concrete structures. It can identify non-homogeneous conditions such as voids, cracks, honeycombs and frozen concrete.
-
SEM-400 -
Beijing KeHuan Century EMC Technology Co,.LTD
Vehicles are our daily public transportation. Electromagnetic pollution in vehicles has attracted more and more public attention. The newly revised compulsory standard GB27630-201X "Passenger Car Air Quality Evaluation Standard" intends to require the electromagnetic field in the car as one of the indicators, according to GB/T37130-2018 "Measurement method of vehicle electromagnetic field relative to human exposure" The measurement method is to measure the intensity of the magnetic field in the car. In the frequency range of 10Hz-400kHz, the electromagnetic field measurement result should meet the public limit requirements of GB8702-2014 for electromagnetic exposure.
-
Ono Sokki
By adding transient operation functions (self-learning/predictive driving + each test mode performing) to measurement•control panel, Ono Sokki can build up engine test system that can perform transient mode tests supporting worldwide gas emission controls including TRIAS, FTP, EURO, and ISO. (e.g. WHDC, NRTC).This system provides good reproducibility for Transient mode test. Delay compensation and rotation inertia compensation function have greatly improved as well as self-learning / predictive driving function.Automatically processes from measurement to data output of test result, in conjunction with gas emission analyzer, tunnels, gas emission particle measurement system, smoke meter, etc.
-
Chroma ATE Inc.
50/100 MHz clock rate50/100 Mbps data rate1024 I/O pins (Max :1280 I/O pins)Up to 1024 sites Parallel testing32/64 M pattern memoryVarious VI sourceFlexible HW-architecture (Interchangeable I/O, VI, ADDA,)Real parallel trim/match functionTime & frequency measurement unit (TFMU)High-speed time measurement unit (HSTMU)AD/DA test optionSCAN test option (max 1G M/chain)ALPG test option for embedded memorySTDF tools supportTest program/pattern converter(J750, D10, V50, E320, SC312, V7, TRI-6020, ITS9K)User friendly windows 7 environmentCRAFT C/C++ programming languageSW (Software) same as 3380P & 3360P
-
PTE-100 -
SEICA SpA
The PTE-100 gives test personnel access to electrical signals for probing, voltage injection, isolation checks, voltage/current and time/frequency measurements, and it offers the ability to analyze hot and loaded circuits, verifying missing, corrupted or present valid signals. Furthermore, the PTE-100 offers the ability to make electrical verification activities more efficient, repeatable and safe, by introducing software controlled test sequences to reduce human errors and guide diagnostic resolution. Break Out Boxes are commonly made in-house and are often specific to a particular project. They are simply designed to multiplex connections between two units and use external instrumentation for signal injection or measurement. The end result is a multitude of tools, difficult to maintain, with limited transportability, providing costly and inefficient operations at the factory or in the field.
-
Anritsu Corporation
With an established market leadership position in GCF and PTCRB approvals for LTE-Advanced and all leading-edge technologies, Anritsu continues expanding its number of test case validations in GCF and PTCRB for Protocol, RF and RRM conformance testing. With increasing complexity of wireless technologies, Anritsu Conformance Test systems provide easy-to-use control software to maximize testing efficiency.
-
S.E.A. Datentechnik GmbH
The P480-1000 battery test system is a scalable high-performance test system consisting of a central power unit with power supply units and electronic loads and up to four mobile test stations. The test stations contain the necessary measuring technology and the PC terminal with touch screen for operating the test bench. The modular concept, the common use of power supply units and loads as well as the regenerative capability of the loads enables an extremely cost-efficient operation of the entire test system both in the development and production of battery systems. The required power is switched to the respective test station via a specially developed high-performance switching matrix
-
EUROSMC, S.A.
The Raptor system consists of a main ‘master’ unit and a number of optional units that enable the execution of virtually any commissioning or routine testing jobs on the primary equipment of medium and high voltage electricity installations.
-
S.E.A. Datentechnik GmbH
S.E.A. produces test systems in small batch series or single pieces. Basing on our TestMaster software we can represent the complete test chain beginning with requirement management up to the report. Our systems are flexible and allow configuration for several samples and measurement hardware.
