Filter Results By:

Products

Applications

Manufacturers

Showing results: 916 - 930 of 5325 items found.

  • FPGA Boards

    Abaco Systems Inc

    Take advantage of FPGA cards built on open standards and with a high degree of configurability in order to address a wide range of applications - without the expense and extensive development time of custom in-house developments.

  • Moisture Meter

    A Popular Science Apparatus Workshop

    Are measuring instruments used to measure the percentage of water in a given substance, as physical properties are strongly affected by moisture content and high moisture content for a period of time may progressively degrade a material.

  • 1x4 Switch

    S-104 - Notice

    1 X 4 Switch slot module of FOTS system carries out the switching function that enables a single channel input to go to any of 4 outputs or a selected particular channel of 4 inputs to go to a single channel output. And its MEMS type switch module is bidirectional and transparent to signal format. It is remarkable that high speed switching and various driving program such as timed, manual or sequential switching mode are available through the combination of high speed response time switch and high speed FPGA processor. On the basis of less than 1ms switching time and 10ms minimum switching, high speed sequential switching can be installed easily by defining switching order, interval time and duration. Current switching channel status can be checked through LED fronted with slot, and present driving condition of optical switch can also be monitored through GOI or LCD monitor.

  • FLIM Upgrades for Olympus

    FV1000 - Becker & Hickl GmbH

    *Two Fully Parallel TCSPC FLIM Channels*Compact bh Simple-Tau or Power-Tau System*Two HPM-100-40 GaAsP Hybrid Detectors*Optional: HPM-100-06 Hybrid Detectors, IRF Width < 20 ps FWHM*Optional: HPM-100-50 Hybrid Detectors for NIR FLIM*Optional: Multi-Wavelength FLIM*Excitation by bh ps Diode Lasers*Excellent Time Resolution: Electrical IRF Width 6.5 ps FWHM*Time Channel Width Down to 813 fs*Megapixel FLIM, Up to 2048 x 2048 Pixels at 256 Time Channels*Simultaneous FLIM/PLIM*Detection Wavelength Range from 360 nm to 900 nm*Excitation by Ti:Sa Laser, OPO, or by bh ps Diode Lasers*Systems for Multiphoton FLIM and Confocal FLIM*Systems are Modular: More FLIM Channels can be Added

  • FLIM Upgrades for Zeiss LSM

    710 / 780 / 880 - Becker & Hickl GmbH

    *Two Fully Parallel TCSPC FLIM Channels*Compact bh Simple-Tau or Power-Tau System*Two HPM-100-40 GaAsP Hybrid Detectors*Optional: HPM-100-06 Hybrid Detectors, IRF Width < 20 ps FWHM*Optional: HPM-100-50 Hybrid Detectors for NIR FLIM*Optional: Multi-Wavelength FLIM*Excellent Time Resolution: Electrical IRF Width 6.5 ps FWHM*Time Channel Width Down to 813 fs*Megapixel FLIM, Up to 2048 x 2048 Pixels at 256 Time Channels*Simultaneous FLIM/PLIM*Detection Wavelength Range from 360 nm to 900 nm*Excitation by Ti:Sa Laser, OPO, or by bh ps Diode Lasers*Identical Systems for Multiphoton FLIM and Confocal FLIM*Detectors can be Swapped Between NDD Port and Confocal Port*Systems are Modular: More FLIM Channels can be Added

  • Sand and Dust Testing

    National Technical Systems

    NTS operates some of the largest and most accurate sand and dust testing chambers available in the industry. We can accommodate parts in excess of 8 ft3 (0.25 m3) and comply with the requirements of various regulatory standards. While sand or dust circulate at up to 40 mph (65 kph) we can modify the test according to your special requirements, including running at temperatures of up to +200°F (+95°C). A calibrated “hopper” which assures that an adequate amount of contaminant is entering into circulation manages the input to the chambers. In addition to measured inputs, NTS employs an electronic beam, which determines that there is the right mixture of sand or dust and air in the test medium at any given time. This enables our technicians to adjust for loss in real time, and make corrections to ensure that the test article is exposed to the harmful particulate matter for the requisite amount of time.

  • COM-HPC Server Type Size D Module with Intel® Xeon® D-2700 Processor (formerly codename: Ice Lake-D)

    COM-HPC-sIDH - ADLINK Technology Inc.

    ADLINK’s COM-HPC-sIDH COM-HPC Server Type Size D module is based on the Intel® Xeon® D-2700 processor and features integrated high-speed Ethernet for up to 8x 10G or 4x 25G combined with 32 PCIe Gen4 lanes for instantaneous responsiveness and performance. Equipped with Intel® TCC, Deep Learning Boost (VNNI), and AVX-512 technologies for optimal, accelerated AI performance, and support for Time Sensitive Networking (TSN), it offers precise control for hard-real-time workloads across all networked devices.

  • Dual Channel Multi-function Decommutator

    LS-55-DD - Lumistar Inc.

    The Lumistar LS-55-DD PCI Dual Multi-function PCM Decommutator offers two multifunction decoms and two optional bit synchronizers (LS-45) in a single PCI card slot. The multi-function decoms are implemented in FPGA using a next generation design based on the LS-50-P. The simulators,decommutators, time code reader and time code generator are achieved on the main board and the bit synchronizer is achieved through a low-profile daughterboard. CVSD voice, h.261 video, and IRIG Chapter 8 decoding are achieved through software.

  • Flexible Implantable Microprobe

    IT-1E - Physitemp Instruments

    IT-1E Flexible Implantable Microprobe - For ultra fast measurements and for use on micro-size specimens. Similar to our most popular IT-18 microprobe but the sensor bead is exposed, resulting in the same ultra-fast response time of the IT-23 but with the Teflon™ sheath strength of the IT-18. Time constant 0.005 seconds. Tissue Implantable with a 18 gauge needle (supplied). Rather fragile at tip. Coated in Teflon™. Maximum Temperature 150°C. Isolated. Probe tip diameter .011", sheath diameter .025'' . 3 foot lead.

  • HPLC/UHPLC/SFC Systems

    Nexera series - Shimadzu Corp.

    Shimadzu has long been advancing the analytical performance of HPLC systems. At the same time, we recognize that overall efficiency depends not only on the performance of one instrument, but on the management of all devices within a lab. This realization leads us to now, a time in which AI capabilities have been incorporated to allow devices to detect and resolve issues automatically. In addition, lab management has been integrated using the Internet of Things (IoT) and device networking, making it simple to review the status of instruments and optimize resource allocation.

  • Media Analyzers

    Vega Family - Interra Systems, Inc.

    VEGA Media Analyzer (VMA) is an industry leading media analysis platform for standards compliance, debug, and interoperability of encoded streams. VMA enables navigation down to the deepest levels of a media file to generate error reports and analysis. This significantly reduces R&D and QA time in delivering standards-compliant video. VMA supports all popular video compression and container standards and includes features such as video comparison and quality checks. These features help deliver high quality, standards-compliant media while reducing R&D and QA time.

  • Omnidirectional Source

    BAS001 - Larson Davis, Inc.

    The BAS001 Source is designed to generate omnidirectional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a uniform acoustic field. The available high-efficiency power amplifier has no fan for cooling, allowing measurements in quiet environments, like those in reverberation time applications.

  • PCI Express A/d Board

    AD14-500x4-IRIG - Ultraview Corporation

    The AD14-500x4-IRIG is a high performance wideband 4-channel 14-bit data single PCIe Gen3 board, that can continuously digitize four wideband signals, with four high linearity A/Ds. A second board version AD14-500x4-K7US-IRIG-B has all of the above features and can additionally be synchronized with stability of better than +/- 100 picoseconds with respect to an IRIG-B 1PPS signal and global time codes from a satellite receiver or local site time reference, allowing simultaneous synchronized acquisition of data at multiple locations anywhere in the world.

  • Real-time Power Electronics Emulator

    HIL 6 series - Typhoon HIL, Inc.

    With 20 ns PWM sampling time, down to 500 ns simulation time step, and ultra-low latency, 6 Series processor has set the industry standard for ultra-high fidelity real-time emulation of power electronics systems. Simply plug your controller into a Typhoon HIL 6 Series real-time emulator, without any controller modifications, and take it for the most demanding test drive ever. Test any and all imaginable operating conditions, including faults. Automate and formalize test processes with our integrated software tools.

  • Water Level Controller

    Ajinkya Electronic Systems

    We deal in qualitative electronic programmable water level controller or water level guard which is an advance instrument that control water pumps. It controls the pump as per levels in the underground and overhead tanks. It also protects the pump from power fluctuations. It is a novel and fitting solution for all your Water Problems. These water level controllers have provision to switch on the pump automatically as per time set. As an add on feature one time dependent switch is provided so that the common society lights can be controlled from the same unit.

Get Help