Showing results: 3136 - 3150 of 5324 items found.
-
PCE Instruments
The handheld tachometer is a means of measuring revolutions within the industrial sector, either optically or mechanically. The handheld tachometer can be used for maintenance and calibration of machines that have moving parts. The principle is similar to a bicycle speedometer, where time will be measured until a wheel has completely turned. The handheld tachometer has two different measurement methods.The handheld tachometer may have a contact connection to the moving parts. Alternatively, the handheld tachometer works with reflecting marks. This will be secured on the moving part. As the laser strikes the reflecting mark during rotation, it will be reflected and detected in the handheld tachometer via a sensor. Rotation speed and speed can be seen on the handheld tachometer. The handheld tachometer may combine both possibilities (contact and non-contact connection). Next to the handheld tachometer you find other devices for measuring revolutions at PCE Instruments.
-
415 -
Elcometer Limited
Incredibly fast (60+ readings per minute), reducing inspection times, increasing productivitySwitches instantly between ferrous & non-ferrous substrates without interruption1Measures cured paint & powder coatings up to 1000μm (40mils)Zero or smooth (2 point) calibration ensures accuracy on smooth & thin coated substratesEasy to use, ergonomic design provides maximum comfort for continuous useLarge easy to read values in microns or milsAuto rotating large colour display provides clear visibility whatever the angle of measurementScratch, solvent & water resistant display protects against the elementsRugged & resistant to dust or powder coatings equivalent to IP64, ideal for modern industrial & powder coating environmentsTransfer live data via USB or Bluetooth® to ElcoMaster® for instant report generation
-
LXinstruments GmbH
To make your staff able to face daily tasks and handle with high productivity is in the center of our trainings. Especially when a new test sytems starts to run it is extremely important that the personnel can operate appropriately from the beginning.Our workshops are designed as classroom trainings so everybody can concentrate completely on the workshop contents without being bothered by day-to-day business or other troubles.An alternative is the training in-house so we can look after individual and concrete problems directly on-site at the running test system.No matter if we teach in our rooms or in-house we emphasize to teach concrete practical content. The participants will spend at least 50% of their time with pracitcal questions or problems. Small groups ensure the individual care of each. We offer trainings in english or german language.
-
Ellutia Chromatography Solutions
Nitrosamines are carcinogenic compounds that can be found and formed in many products. This has been a particular issue in the pharmaceutical industry recently. Traditional approaches to the analysis, such as by mass spec, have been challenging due to the low detection levels required, the possibility of false positives, or even missing. This system takes a unique approach of using the combination of a chemical reaction targeting nitrosamine compounds, then detection by a detector with very high selectivity and sensitivity for nitro/nitroso compounds. Rather than speciating the various nitrosamines present, the system gives a single quantitative result down to 1 ppb for the total nitrosamine content. This means both volatile and non-volatile nitrosamines are measured at the same time. This process is automated to allow a high sample throughput. This makes it ideal for screening a large number of samples rapidly.
-
PGB-745 -
Prostat Corporation
- Designed for measuring charge movement and decay time of ESD controlled materials- The set consists of two stainless steel electrodes and two very high resistance test leads selected for this application- The high resistance leads minimize leakage during the test cycle and are equipped with male banana plugs
-
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Network analyzers are used to measure so-called scatter parameters (S-parameters). These describe the behaviour of electrical components with the help of wave magnitudes. Whether simple cables, filters, amplifiers or complex subsystems, the following applies to all these components: Different loads can have unseen effects on the measured values over time.
-
Pickering Interfaces Ltd.
Our PXI & LXI simulation tools help you to accelerate the development process by simulating the product in your test system. These tools allow you to develop and test the system software independent from your application hardware. By using the tools, you can minimize the time required with the physical system.
-
Testing House, Inc.
No need for test fixtures. Integrates product development, production test, and device programming in one system. Test and Programming data can be reused in Production. Fast test procedure development. Reduced inventory management. Eliminates or reduces ICT usage time. Pre-production testing can begin as soon as prototype is released.
-
Copper Mountain Technologies
Vector network analyzers are a valuable tool for broadcast engineers. VNAs enable users to perform an array of measurements including cable loss, return loss, VSWR, distance to fault, and time domain. CMT’s USB VNAs help broadcasters extend their reach and easily perform maintenance in the field or in the shop.
-
EMIA-Expert -
HORIBA, Ltd.
The EMIA-Expert Carbon/Sulfur Analyzer is based on HORIBA''s widely respected expertise in Non-Dispersive Infrared (NDIR) technology. It offers improved the cleaning efficiency, enhanced user-friendly software, durability, operability and maintenance to ensure efficient measurements and its shortened cycle time accelerates your development and manufacturing speed.
-
RapiCover -
Rapita Systems Ltd.
* Collect coverage for Ada, C & C++ (inc. MC/DC) on-host & target* Reduce test builds needed for analysis on constrained targets* Save time with efficient merge and mark verification workflow* Simplify verification by integrating with your CI tool* Produce evidence for DO-178 and ISO 26262 certification
-
AD-7100 -
ADEX Urzadzenia Pomiarowe
4 Connectors measurement method, Max measurement time 10 sec Indicator of right connect test cables, Lock of test current connectors, Graphical backlight LCD display (240 x 128), True test current indicator, Temperature control of test current stability system,
-
Extech LT505 -
Extech Instruments Corporation
Extech’s pocket-sized autoranging Light Meter offers wide light intensity ranges measuring up to 40,000Fc (400,000Lux) with high resolution to 0.01Fc (0.1Lux). Ideal for indoor lighting tests and for checking security and safety illumination in parking garages, night time ATM areas, stairwells, landings, and hallways.
-
PICOXEA -
AUREA Technology
The PICOXEA from AUREA Technology is the first "all in one, very-compact, and easy-to-use" Time Correlated Single Photon Counting TCSPC ANALYSER, which contains pulsed laser, gated-mode Single Photon Counting and its associated TDC correlation electronics and software for standard fluorescence decay recording.
-
63800 -
Chroma Systems Solutions, Inc.
The Chroma 63800 Loads can simulate load conditions under high crest factor and varying power factors with real time compensation even when the voltage waveform is distorted. This special feature provides real world simulation capability and prevents overstressing resulting in reliable and unbiased test results.