Showing results: 691 - 705 of 1454 items found.
-
AX92324 -
Axiomtek Co., Ltd.
Intel® Ethernet Controller X550-AT2, up to 10 Gbps data rate, Supports 15.5KB Jumbo Frame and IEEE 1588, Compliant with IEEE802.3at to deliver 25.5W per port, PCI Express x4 compliant, PoE power on/off via Power Manager software and API, Operating temperature range from 0°C to 55°C
-
QSFP28 AOC -
Eoptolink Technology Inc., Ltd.
Eoptolink QSFP28 Active Optical Cable is a 4-channel optical transceiver, which conforms to QSFP28 MSA and works at the rage of 25Gbps per channel. The AOC conforms to transmission speed required by InfiniBand™ EDR, 100 Gigabit Ethernet (100GBASE-SR4) and enables to transmit maximum 100m. Best for close-range high-speed transmission, for example, betweenserver racks, between servers.
-
AstroAI Corp.
Check out our VIDEO on the left side and take a quick tour of AstroAI Multimeter! TEST A WIDE RANGE of measurements including AC/DC Voltage, AC Current, Resistance, Continuity; Also Tests DiodesQUALITY DESIGN features a sampling speed of 2 times per second; Auto off conserves battery life and increases the lifespan of your multimeter
-
HITT -
Hention Electrical Equipment Co., Ltd.
The HITT Automatic Interfacial Tension Tester is designed and made as per GB/T6541 “Test Methods for Interfacial Tension of Petroleum Products between Oils and Water (Ring Methods)”. It is suitable to determine interfacial tension between mineral oils and water under non-equilibrium conditions (Liquid-liquid interface). It can also be used to determine surface tension of various liquids (liquid-gas interface).
-
VME64/VME64x -
VECTOR Electronics and Technology, Inc.
Vector offers a comprehensive range of VMEbus backplanes from 2 to 21 slots. VME J1/J2 and VME64x J1/J2/P0 backplanes per ANSI/VITA 1.1-1997. Monolithic 6U high VME64 and VME64x backplanes are fully RoHS compliant and perform to ANSI/VITA 1.7-2003 (R2009) increased current level for VME (96 pin) and VME64x (160 pin) DIN/IEC connectors.
-
Premier Electrosystems
Premier Electrosystems' Flammability test apparatus is used to determine the degree of flammability on the basis of the test results after the material are tested under different conditions under effect of live flames. Our flammability testing equipment is safe and accurate for flammability testing in labs. Premier's Flammability Tester complies with BIS standards and are made as per design specified in the relevant IS standard.
-
Fiber Lab 3200 -
M2 Optics, Inc.
Fiber Lab 3200 from M2 Optics Inc. is a must-have solution for anyone developing or testing fiber optic products and systems. Available in two types of rack-mount chassis with up to 300km per unit, it offers the most professional approach for using fiber in the laboratory or network. In addition, it provides maximum protection against potential fiber and connector damage.
-
458-LM-A8-36 -
Telebyte, Inc.
Simulates 26 AWG PIC as specified in ANSI T1.417Bandwidth DC to 36 MHzIdeal for testing ADSL, ADSL2, ADSL2+, VDSL, VDSL2 modems/DSLAMs8 channels per line moduleLoop lengths programmable from 0 to 7,500 ft in 500-ft incrementsPlugs into our 458-CC-16 (16-slot chassis) or 458-3SLB (3-Slot chassis)Noise Floor less than -150 dBm/Hz
-
Washington Laboratories LTD.
RFID is a lot more prevalent than it was; it is used for inventory control, electronic article surveillance, process control and sample identification just to name a few. RFID readers are certified as unlicensed devices per FCC Part 15. Part 15.225 is for RFID readers in the 13.56 MHz range, and Part 15.247 is used for RFID readers in the 900 MHz range.
-
Smartech Inc.
We are actively engaged in offering a wide gamut of high performing Steel Thickness Meter that is used to measure the thickness of any object. Offered thickness meter is manufactured by the skilled professionals using well tested steel and most recent technology with set worldwide principles. Offered thickness meter can be customized as per a variety of specifications of our esteemed clients.
-
multiLane
In an everchanging industry, new form factors are launched to support higher speeds like 800G and later, 1.6T. With the speed per lane increasing exponentially, the need for thermal and cooling tests also rises with new requirements and demands.MultiLane is offering a OSFP-XD thermal load with a controller board, with the goal of emulating transceiver thermal behavior, but also to test cooling systems.
-
QED Environmental Systems
QED chemical metering pumps are suitable for dispensing chemicals for a variety of anti-scaling and anti-foaming applications. These pumps provide precise and adjustable delivery of anti-scale/anti-foam agents. Graco chemical metering/injection pumps deliver flow rates from 17 to 150 gallons per day and operate in -40° F to 175°F (-40°C to 79°C) temperatures.
-
CR - 1A -
Buck Research Instruments, LLC
The CR-1A is a high performance, cryogenically cooled hygrometer. CR-1 instruments have been routinely used aboard NASA aircraft and elsewhere for years. The CR-1A is a miniaturized version of the original CR-1, and uses a much smaller LN2 dewar. Operating time per filling of LN2 ranges from 6 to 8 hours, depending on the dew points being measured.
-
Aero Nav Laboratories, Inc.
Spectroscopy, Chromatography, Electrochemistry, Thermal Analysis, and Advanced Physical Testing Protocols!Certified Testing per EPA / FPA / ISO / ASTM / USP-NF / CODEX / AOAC / AOCS Chromatography (gC & HPLC), Heavy Metals (DCP, AAS, I-C & XRF), Spectroscopy (FT-IR, UV-VIS, & Fluorescence), Foods & Nutrition, Environmental Impact, Complete MSDS Testing & Green/LEEDS Certification, Military.
-
R.R.Transformers & Equipments
RR-OIL TEST SET also known as OIL BDV KIT is an equipment-designed and produced to test the ELECTRICAL STREGTH of Liquid Insulating Materials such as Transformer Oil, Capacitor Oil etc. The test set carries out test on these materials as per Indian Standard Specification IS 6792. This Oil Test Set is essential for Transformer & Switchgear Manufacturers, also for oil filtration units.