Showing results: 6661 - 6675 of 9910 items found.
-
QOAL400 -
Applied Test Resources
The QOAL400 module is a precision instrument capable of measuring all common parameters of an Op Amp, including AC as well as DC parameters. The QOAL400 has four completely independent channels, which allow a quad device to be tested in a minimum amount of time. Each channel has a full set of resources to measure all common parameters.
-
FR-103HP -
Femtochrome Research, Inc.
The FR-103HP is a compact NL crystal autocorrelator, suitable for moderate and high power lasers (Pav>5mW). It is available with a scan range >60ps (suitable for pulsewidths within 10fs-15ps) and covers a wide range of wavelengths with easily interchangeable plug-in detector modules. The standard FR-103HP provides ‘real-time’ pulsewidth monitoring capability for rep rates down to 1kHz.
-
310130102 -
Virginia Panel Corporation
The i2 Micro iCon receiver is a one piece connector capable of holding up to 168 QuadraPaddle contacts. QuadraPaddle modules are molded on .100” (2.54 mm) centers to meet the need for high-density I/O in a compact assembly. This i2 receiver is made for crimp contacts. Accessories such as keying pin kits, protective covers, and strain relief are available.
-
NEO-M8U (Qwiic) -
SparkFun Electronics
The SparkFun NEO-M8U GPS Breakout is a high quality GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides continuous navigation without needing to make any electrical connection to a vehicle, thus reducing cost of installation for after-market dead reckoning applications.
-
LTI -
Dwyer Instruments Inc.
The Series LTI Temperature Panel Meters can be configured in a variety of configurations to provide visual indication and control of a process temperature. Field pluggable modules are available to add additional relay outputs, digital I/O ports, and serial communications. Utilizing an easy-to-read, dual 6-digit display, more descriptive programming parameters are displayed to simplify initial setup.
-
EM-1 Econo™ -
Bio-Rad Laboratories
The Model EM-1 Econo UV monitor is a single-wavelength detector for flowthrough monitoring of effluents from chromatographic columns, centrifugation gradients, and other devices. The monitor consists of a control unit and an optics module that includes both 254 and 280 nm filters and a 2 mm pathlength flow cell. Connection is via Luer-Lok fittings for quick, easy changes.
-
T24-WSS -
Mantracourt Electronics Ltd
The wireless wind speed transmitter (Anemometer) T24-WSS is built on Mantracourt’s T24 2.4 GHz wireless technology and operates alongside any T24 device such as base stations, handheld displays, analogue output, relay modules, GPRS data loggers, computer interfaces and more. Data transmitted by the T24-WSS can be received by multiple T24 receivers and displays.
-
MODEL PRC-2000 -
TEK-VAC INDUSTRIES Inc.
A Compact Vacuum Bake Module, Ideal for Processing up to 12" x 12" wafers.Digital temperature control with P.I.D and auto tune features for precision control. Adjustable vacuum chucking pressure. Timed thermal contact provides excellent reproducibility. Automatic and manual versions. Safety interlocked Various fixture plates are available for multiple substrate processing.
-
DES Series -
Magtrol Inc.
The DES 310 and DES 311 power supplies are suited to the entire range of Magtrol's Eddy-Current and Powder Brake Dynamometers. To avoid any disruption of the surrounding electronic modules, the DES 310 / DES 311 supplies are fitted in an industrial housing made of extruded cast aluminum. This housing must be installed directly on the test bench, as near to the dynamometer as possible.
-
CA92050-KT -
UC Instruments, Corp.
The CA92050-KT 2 kHz fast swept tunable laser modules offer superior performance for the test of Fiber Vibration Sensing, DWDM components, AWG , WSS, OPM components, Fiber sensing( especially for vibration fiber sensing application) , optical amplifiers, and other general purpose of fiber optical test and measurement with high wavelength resolution applications.
-
YAV90Q04 -
6TL Engineering
The interface YAV90Q04 permits to connect two YAV90096 boards to one 192-Signal contacts Quadrapaddle module. As the Mini-D 50 connectors let 2 free pins (1 and 26), these pins are interconnected to a test point, with the possibility of be grounded. Cable P/N J6200540: Mini-D-50 to Mini-D-50 IDC connectors with 400 mm flat cable.
-
SR22 -
Computer Conversions Corporation
The SR Series are miniature, low cost AC reference generators designed to supply 26 or 115 volt excitation to synchros or resolvers in military and industrial control applications. They accept +/-15V DC and provide up to 5VA of transformer isolated output power. These converters are packaged in PC card mounting modules 2.6”x3.1”x1”H
-
SR21 -
Computer Conversions Corporation
The SR Series are miniature, low cost AC reference generators designed to supply 26 or 115 volt excitation to synchros or resolvers in military and industrial control applications. They accept +/-15V DC and provide up to 5VA of transformer isolated output power. These converters are packaged in PC card mounting modules 2.6”x3.1”x1”H.
-
SR25 -
Computer Conversions Corporation
The SR Series are miniature, low cost AC reference generators designed to supply 26 or 115 volt excitation to synchros or resolvers in military and industrial control applications. They accept +/-15V DC and provide up to 5VA of transformer isolated output power. These converters are packaged in PC card mounting modules 2.6”x3.1”x1”H.
-
MSXB 027 -
Microstar Laboratories, Inc.
The MSXB 027 Analog Isolation Board accommodates up to 8 isolation modules in any combination of input and output. Up to 64 5B Analog Isolation Boards can be connected to a single DAP for a total of 512 isolated channels. When used in conjunction with Analog Output Expansion Boards, up to 66 of these channels can be specified as isolated analog outputs.
