Showing results: 5866 - 5880 of 7502 items found.
-
Teledyne DALSA
Teledyne DALSA delivers the industry's most reliable and versatile family of frame grabbers combining industry leading performance with industry leading feature sets, great value and extensive camera support. Board-level innovations deliver Trigger-to-Image Reliability significantly increasing system performance and ultimately helping to increase yield, while CamExpert, the camera configuration utility included with our free Sapera LT SDK, leverages the power of our acquisition boards in one of the industry's most efficient and easy to use interfaces.
-
DE20 -
Taylor Dynamometer, Inc.
Power: 27 hp (20 kW)Torque: 59 lb-ft (80 Nm)Speed: 12,000 rpmWater Use*: 4 gpm (15.1 lpm)Inertia Value: 0.30 lb·ft2 (0.0125 kg·m2)Shipping Weight: 904 lb (410 kg)Rotation: bi-directional*No Cooling System
-
Taylor Dynamometer, Inc.
Cradle- or single-roll (top-mount) dynamometers accommodating single- or tandem-axle vehicles, with continuous vehicle power ranges from 50 hp to 622 hp (37 kW to 464 kW), Taylor’s chassis dynamometers allow a top recommended speed of 90 mph (145 kph) at full load. Look to our experts to not only help you select your optimal system, but also to provide design, configuration, installation and training for a total solution that integrates seamlessly with your operation.
-
FSA 2.5-inch Series -
Axiomtek Co., Ltd.
Axiomtek's FSA (Flash SATA Disk) series is a high performance 2.5" flash disk and fully compatible with SATAII standard which make it an ideal replacement for conventional SATA HDD without any driver or system modification. This 2.5" SATAII flash disk is provided with huge capacities up to 256 GB to meet diverse needs of data storage. With the features of high capacity storage, data integrity, anti-vibration and low power consumption, the FSA series is surely a solid solution for expanding an industrial computers memory.
-
DE500 -
Taylor Dynamometer, Inc.
Power: 670 hp (500 kW)Torque: 2,213 lb-ft (3,000 Nm)Speed: 7,500 rpmWater Use*: 90 gpm (340.7 lpm)Inertia Value: 52 lb·ft2 (2.196 kg·m2)Shipping Weight: 4,740 lb (2,150 kg)Rotation: bi-directional*No Cooling System
-
DL4K -
Taylor Dynamometer, Inc.
Power: 4,000 hp (2,983 kW)Torque: 37,921 lb-ft (51,414 Nm)Speed: 2,550 rpmWater Use*: 291 gpm (1,101.6 lpm)Inertia Value**: 311.4 lb·ft2 (13.12 kg·m2)Shipping Weight: 3,400 lb (1,542 kg)*No Cooling System**With Companion Flange
-
DS46-HS -
Taylor Dynamometer, Inc.
Power: 2,125 hp (1,584 kW)Torque: 7,125 lb-ft (9,660 Nm)Speed: 4,000 rpmWater Use*: 147 gpm (556.5 lpm)Inertia Value**: 172.4 lb·ft2 (7.3 kg·m2)Shipping Weight: 2,860 lb (1,297 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
YAV90PIN -
6TL Engineering
The YAV90PIN board is designed to cover the need to control the available power supplies in a test system to the device under test. A VPC 90 series connector is used as interface with the fixture, guaranteeing more than 20.000 mating cycles. Two connector contacts per relay contact are used.
-
Elmeasure India Pvt. Ltd
Real time monitoring and reportingComposite system with EMS and PEMSDesired reports like, Doff wise, shift wise, count wise, production, energy, UKGSpeed Vs Kw curve, trends, bar graphs, comparisonsAlerts on higher UKG, lesser production, utilization & power fluctuations.Maintenance alerts based on run hours production cost analysis - Cost Audits - Energy Audits
-
DE250 -
Taylor Dynamometer, Inc.
Power: 335 hp (250 kW)Torque: 886 lb-ft (1,200 Nm)Speed: 8,000 rpmWater Use*: 47 gpm (177.9 lpm)Inertia Value: 11 lb·ft2 (0.464 kg·m2)Shipping Weight: 3,086 lb (1,400 kg)Rotation: bi-directional*No Cooling System
-
Industrial Acoustics Company
IAC Acoustics has been providing noise reduction solutions to the power generation market for over 50 years. Through the provision of enclosures, exhaust systems, filtration packages and containers, we are able to provide individual aspects or a complete package to your generator set installation.
-
Distance Measurement Sensor (Qwiic) -
SparkFun Electronics
The LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get started. This is the ideal solution for drone, robot, IoT, or unmanned vehicle operations when space is tight and power is limited. This sensor has up to a 10 meter range, 1cm resolution, and requires 85mA during data acquisition. The user can read and write to the LIDAR-Lite v4 using the I2C protocol; this is where the addition of the SparkFun Qwiic system really shines. The LIDAR sensor requires 5V to operate but runs on 3V3 logic. With a 5V boost circuit and an easy-to-use Qwiic connector you can power the sensor and get distance measurements over Qwiic all with a single piece of hardware.
-
terraTX-50 -
Monex Geoscope Pty Ltd
The terraTX-50 is a high power field transmitter capable of delivering 50Amps to a transmitter loop, designed to be used in conjunction with a terraTEM unit. The period is controlled by the terraTEM24, terraTEM or the optional inbuilt GPS synchronisation module within the terraTX-50. The ramp and the full Tx current waveform are directly inputted into the terraTEM24 or terraTEM. This makes the terraTX-50 simple to operate, freeing up operators from inputting key system parameters into the console after each sounding.
-
N39400 Series -
Next Generation Instrumental (Shanghai) T&C Tech. Co., Ltd.
N39400 series is a high-accuracy & multi-channel programmable DC power supply with standard 19-inch 2U design, available for cabinet installation. Single N39400 supports Max. 4 channels output, with channels isolated. Both local operation on front panel and remote control on a computer are supported. N39400 can be widely used in lab test, system integration test, production aging line, etc.
-
DE400 -
Taylor Dynamometer, Inc.
Power: 536 hp (400 kW)Torque: 1,475 lb-ft (2,000 Nm)Speed: 8,000 rpmWater Use*: 74 gpm (280.1 lpm)Inertia Value: 26 lb·ft2 (1.107 kg·m2)Shipping Weight: 4,012 lb (1,820 kg)Rotation: bi-directional*No Cooling System