Showing results: 5716 - 5730 of 7502 items found.
-
HXV/128-MF -
Cytec Corp.
These Chassis controls up to 16 8x1 modules, 16 4x2 modules, or up to 8 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
HXV/96-MF -
Cytec Corp.
These Chassis controls up to 12 8x1 modules, 12 4x2 modules, or up to 6 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
CXM/32-MF -
Cytec Corp.
These Chassis controls up to 4 8x1 modules, 8 4x1 modules or mixtures of 8x1"s, 4x1"s, 2x1"s and 2x2 modules in any combination or configuration for up to 32 relay drives. LEDs on the front panel show switch and power status. Add Switch Modules and a Control Module to complete the system or simply buy the chassis wired out to D connectors to control your own relays. A pushbutton manual control is optional.
-
JX8/KCP -
Cytec Corp.
This module has 8 single pole, Form C, discrete power relays which are wired and controlled individually. The relays can be externally wired to make any configuration needed. Use as individual A-B relays or use them to drive external relays, solinoids, or any external device. Screw Terminal Connectors and Armature power relay for switching up to 8 Amps of DC or AC current.
-
SystematIC
An IC development is never a reproduction of a previous IC, however there is no need to invent the wheel twice.Considering our extensive IC design experience in the domain of power control we will likely find existing IP blocks to speed up a new IC development. We gladly evaluate if and how our IP can be succesfully reused or applied in your next IC development, and focus on achieving your essential IC requirements in a shorter development time.Our experience includes the following elements which have been developed in a diversity of technologies, from standard CMOS process (mostly 180nm) to 350nm 700V CMOS.
-
all-sun
A DC voltmeter measures the current passing between two points. The normal use of a voltmeter is to check the power in an electrical circuit. Manufacturers install some voltmeters permanently in equipment, but in testing equipment, the voltmeter is generally portable, allowing the user to test different circuits.
-
all-sun
is an embedded circuit; it converts unregulated AC into a constant DC. With the help of a rectifier it converts AC supply into DC. Its function is to supply a stable voltage (or less often current), to a circuit or device that must be operated within certain power supply limits.
-
PCTS Series -
Shanghai Jiuzhi Electric Co., Ltd.
The PCTS Series Power Capacitor Test System are self-contained test sets incorporating all features necessary for testing power capacitors.Logistics pipeline and pneumatic electrodes are used in the PCTS Power Capacitor Test System, it make the test very easily and save lots of time, improve efficiency, in all the test process, no need any artificial operation in the test area .Automatic discharge and perfect low voltage protection permit a more safety test environment than any other traditional test lab.
-
SG7001 -
Shanghai Jiuzhi Electric Co., Ltd.
On-site testing of turns ratio is an important basic measurement for power transformer diagnosis. It helps to detect faulty transformer windings as well as defective tap changer positions.
-
PTTS Series -
Shanghai Jiuzhi Electric Co., Ltd.
PTTS series power transformer test system is the complete test system for single and three phase power transformer and power reactor up to 765kV. The system will perform the following tests in accordance with ANSI / IEEE C57.12.90 and IEC 76 latest edition standards.
-
Shanghai Jiuzhi Electric Co., Ltd.
SEPS Series Energy Storage High Power Test System are self-contained test sets for high power testing without large capacity power grid support. Just typically using no more than 200kW as a charging power, the high-power test system can independently conduct the short circuit testing for power and distribution transformer, dynamical thermal stability testing for current instrument transformer and cable, short circuit current withstanding test and short circuit breaking / making capacity testing for circuit breaker and etc.
-
XD71 -
Hangzhou Xihu Electronic Institute
The device is used for power transformer power outage routine test items to do automated testing.Which is characterized by dielectric loss, insulation resistance, DC resistance, tap-changer switching characteristics, short circuit impedance and variable ratio of six test items are concentrated in an instrument,so that the instrument function, test power and test lead height fusion.Field test, just start wiring once, at the end of unplugging wiring once,the middle process by the test personnel in the computer terminal to send command control,the test system automatically completes all or part of the above test items.
-
Carl E. Holmes Company
Motorized Variable Transformer Controlled Power Supply, P/N 18534PSInput: 460 VAC, 3 PH, 60 HzOutput: 0 to 250 VDC, 200 Amp max.Variable Transformer is used to vary the output. SCR controller is not used, as it generates harmonics.Input control is 0 to 3.6 VDC.Indoor enclosure.Output voltage and current feedback as 4/20 mA for PLC interface.All input/output connections are inside the enclosure
-
Carl E. Holmes Company
The MS-Series features constant voltage and current control with easy, quick installation and maintenance. Modular versions easily increase the output by means of series or parallel connection. All models have DC short circuit protection. With forced air-cooled models, the cooling air quantity is controlled in relation to the load reducing contamination and noise levels.
-
Carl E. Holmes Company
The SCR Controller and the Regulator Board are used in SCR controlled power supplies.CEHCO offers single phase and three phase SCR Controllers with Regulator Boards.