Filter Results By:

Products

Applications

Manufacturers

Automated Test Systems

All necessary elements brought together to test a UUT.


Showing recent results 106 - 120 of 299 products found.

  • Production Line Hipot Tester

    Hypot® Series - Associated Research

    The Hypot Series sets the standard for safety and efficiency in production line Hipot Testing. Whether your application requires AC Withstand tests, DC Withstand tests, or Insulation Resistance tests, The Hypot Series provides innovations that will allow you to begin achieving best practices for safety and efficiency without the need for an expensive automated test system or connection to a PC. You can even connect the Hypot Series with the HYAMP Series to form a seamless safety compliance system for Hipot and Ground Bond Testing.

  • Software/Hardware

    Test Systems Integrators - - Freese Enterprises Inc.

    FEI is a full service test systems integrator offering software only and hardware only solutions, as well as, complete custom automated test equipment. Wherever possible, we combine off-the-shelf computer and electronic components and equipment with customized application software, fixtures, and enclosures to deliver these test systems. Our formal relationships with the major test and measurement equipment manufacturers such as, Keysight Technologies and Cognex, ensures you the best software and hardware solutions, as well as, top-flight technical support.

  • CCD Spectroradiometer

    LMS-8000A/LMS-8000 - Lisun Electronics Inc.

    LMS-8000A/LMS-8000 LED Measurement System is an automated measurement system for identifying the performance of individual LED. It is designed to have a capability of producing any visible spectral distribution, mimicking various light sources in the visible region by feedback control of the radiant power emitted by individual LEDs. This LED test system will be used as a transfer standard for photometric, colorimetric and radiometric applications.

  • 10Gbps Ethernet Tester

    APG 4 - Axtrinet

    Full wire rate Packet Generator and Capture. 4 x Full wire-speed 10Gbps/1Gbps ports SFP+ / SFP supported. 8 x user configurable independent streams per port. Packet transmit rate control (IPG, packets/sec, %) up to line rate. Transmit burst control (single, multiburst, continuous). Easy to use Graphical User Interface plus scripting for integration into automated test systems. Automated RFC testing.

  • microLED Testing System

    OmniPix-ML1000 - InZiv

    The OmniPix-ML1000 is the first all-encompassing microLED testing system, offering both full wafer and localized individual pixel inspection. Measure localized and total EQE. Use automated PL and EL to test and characterize your microLEDs. Analyze defective pixels with nano-PL and nano-EL.

  • PSE Conformance Test Suite for 4-Pair 802.3bt PSE's

    PSA-CT4P - Sifos Technologies, Inc.

    Whether testing single port injectors or 48 port PSE’s, Sifos offers the ultimate solution to assess PSE conformance to all applicable IEEE specifications. With the click of a button, fully automated testing and reporting delivers comprehensive and informative results including difficult-to-spot intermittent conformance behaviors. • Robust 4-Pair 802.3bt (Type-3,4) PSE Conformance Testing• Fully Automated Port Sequencing and Statistics - Test up to 24 ports with the PSA-3000• Catch Both Repeatable and Intermittent Specification Compliance Issues• Greater than 92% 802.3bt PICS Coverage from 24 Fully Automated Tests• Pop-Up Excel Reports Covering 1 to 24 Ports• Widely Used by PSE System and Silicon Manufacturers World Wide

  • In-Circuit Testers

    Acculogic, Inc.

    Whether you’re choosing from our stand-alone manually loaded ICT tester all the way to our fully automatic In-line test system, Acculogic has the solution for you!Acculogic’s Scorpion family of automated test equipment and in-circuit fixture-based testers were created with one underlining theme in mind: “Cost-effective Testing”.

  • PXI Programmable Power Supply

    NI

    PXI Programmable Power Supply modules feature multiplechannels that you can combine for higher voltage or current capabilities. Some modules include isolatedchannels and an output disconnect functionality that allows isolation from the device under test(DUT) when not in use and remote sense to correct for losses in system wiring. You can use these models to simplify the task of designing automated test systems for a wide range of applicationsfrom aerospace and defense to automotive and component testby eliminating the need to mix multiple instrumentation form factors in a given test system.

  • IC Tester

    ICT1 set - Langer EMV-Technik GmbH

    The ICT1 IC tester is a positioning system of Langer EMC-Technik GmbH IC measuring devices in order to do automated EMC tests at ICs. The ICT1 can automatly do immunity- and interference tests at single ICs radiately or at ICs conductely. The Test IC is tested while operating. Its automate pin recognition and the high-precision positioning ( 10 µm ) of the IC measuring devices at the Test IC are the advantages of the ICT1.

  • PXI Oscilloscope

    PXI-5154 / 780319-01 - NI

    1 GHz, 2 GS/s, 8-Bit PXI Oscilloscope—The PXI‑5154 is ideal for acquisition and characterization of fast, nanosecond-edge speeds. It is well-suited for automated test and data streaming applications in the consumer electronics, semiconductor, aerospace/defense, and life sciences industries. The PXI‑5154 also comes equipped with up to 256 MB of memory per channel to provide high, sustained sample rates over extended data capture windows. This digitizer, optimized for automated test, uses a high-throughput bus to lower test times, provides picosecond-level synchronization among modules, and integrates with the entire suite of NI hardware, so you can build and customize a complete mixed-signal or high‑channel‑count test system.

  • PXI Oscilloscope

    PXI-5154 / 780319-02 - NI

    1 GHz, 2 GS/s, 8-Bit PXI Oscilloscope—The PXI‑5154 is ideal for acquisition and characterization of fast, nanosecond-edge speeds. It is well-suited for automated test and data streaming applications in the consumer electronics, semiconductor, aerospace/defense, and life sciences industries. The PXI‑5154 also comes equipped with up to 256 MB of memory per channel to provide high, sustained sample rates over extended data capture windows. This digitizer, optimized for automated test, uses a high-throughput bus to lower test times, provides picosecond-level synchronization among modules, and integrates with the entire suite of NI hardware, so you can build and customize a complete mixed-signal or high‑channel‑count test system.

  • PXI Oscilloscope

    PXI-5154/780319-03 - NI

    1 GHz, 2 GS/s, 8-Bit PXI Oscilloscope—The PXI‑5154 is ideal for acquisition and characterization of fast, nanosecond-edge speeds. It is well-suited for automated test and data streaming applications in the consumer electronics, semiconductor, aerospace/defense, and life sciences industries. The PXI‑5154 also comes equipped with up to 256 MB of memory per channel to provide high, sustained sample rates over extended data capture windows. This digitizer, optimized for automated test, uses a high-throughput bus to lower test times, provides picosecond-level synchronization among modules, and integrates with the entire suite of NI hardware, so you can build and customize a complete mixed-signal or high‑channel‑count test system.

  • Tensile Testing Machine

    84-01 - Testing Machines, Inc.

    A fully digital tensile testing system with high precision control and accuracy. It includes automated computer control of test methods using high resolution auto-ranging load cells with accuracies better than +/-0.5% down to 1/1000th of the load cell capacity for accuracy and simplicity of operation.

  • Brake Testing

    Dewesoft d.o.o.

    Vehicle Brake Test and ABS TestingWe offer an easy-to-use measurement system for brake testing and ABS testing according to ECE, ISO, FMSSV, and SAE international standards. Our test system offers automated workflow, is flexible and robust and used for brake R&D, brake comfort and vehicle testing with regenerative braking. High-accuracy GPS and IMU hardware are available to achieve the highest possible velocity and distance accuracy.

  • Flow Battery Test Stations

    Greenlight Innovation

    Greenlight's turn-key flow battery test systems include load/power supply modules, automated control of flow, pressure and temperature of electrolyte fluids, cell voltage monitoring, 3-level safety system and computer with Emerald dynamic automation software. All Greenlight flow battery test systems come with a our standard 1 year warranty. Our customer service team is available to travel to your facility for commissioning and training.Greenlight''s Automation Division also offers flow battery assembly equipment.