Product

Multiparameter CTD with a Wide Choice of Standard Sensors.

MIDAS CTD+

-

Teledyne Valeport Ltd,

MIDAS CTD+ - Teledyne Valeport Ltd,

Featuring Valeport’s latest 400 Series electronics, the CTD+ will sample all fitted sensors at exactly the same instant, at up to 8Hz. Advanced setup software allows a variety of sampling regimes including burst modes, delay starts and conditional sampling. Available with up to 64Mbyte memory and internal battery pack, as well as a selection of real-time output formats, the CTD+ may be used with Valeport’s own water bottle carousel.

Product

A Global Standard for Acoustic Absorption Measurements

Alpha Cabin

-

Autoneum Holding AG

Alpha Cabin - Autoneum Holding AG

The Alpha Cabin has been especially designed for the measurement of acoustic absorption properties of materials and components used for the noise insulation of vehicles. The Alpha Cabin is significantly smaller than normal reverberation rooms and therefore ideally suited to use within limited space capacities. The acoustic absorption of the Alpha Cabin itself is also very low: Thanks to the high level of sound insulation, background noise in the frequency range of interest is kept to a minimum.

Product

Standard Voltage 37 Pin D-Type Cables - Connector to Unterminated

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to unterminated cable assemblies below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Multi-Element Standards

-

Micromatter

Micromatter

These multi-element standards consist of multi-layer thin film coatings, one on top of the other, upto a maximum of 6 elemental coatings. It is generally recommended to have coating thicknesses < 20 µg/cm2, so as to cause negligible notable matrix effects, in particular absorption of X-rays emitted in lower deposits by those covering them.

Product

Cold-Atom Frequency Standard

-

AOSense

AOSense

Rack-mount microwave atomic clock using laser-cooled 87Rb atoms.  Production unit target specifications:  Allan deviation 2×10-12 @ 1 s, 2×10-14 @ 104 s; flicker floor 1×10-14; absolute accuracy < 1×10-13.

Product

Automatic Battery with Filters with Standard Contactors

BATLVF1200

-

Lifasa - International Capacitors, SA

BATLVF1200 - Lifasa - International Capacitors, SA

LIFASA automatic capacitor banks are used for centralizedcompensation of power factor in low voltage instalations

Product

Standard Type Externally Modulated Optical Transmitter

HT8500H

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HT8500H - Hangzhou Huatai Optic Tech. Co., Ltd.

1550nm externally modulated optical transmitter is the core equipment in the RFTV network system.RFTV is a unidirectional analogue and digital video broadcast. It adopts high efficiency modulation mode for RF carrier wave and its economy , flexibility and bandwidth validity is beyond comparison of IPTV. By adopting EPON, GEPON or P2P access mode to realize triple-play and FTTx, RFTV broadcasting network in 1550nm optical wavelength still plays an important role.

Product

Custom Optical Components and Standards

-

Applied Image, Inc.

Applied Image, Inc.

With the amount of applications that optical components have, no one could hope to have the perfect component for every possible scenario. For this reason, APPLIED IMAGE makes easy the process of designing, building, and delivering custom components to our customers. Our engineering process is designed to produce the best parts in the industry and more importantly, the best component for your specific needs. The APPLIED IMAGE experience will cover the project with expert engineers from start to finish. Use the form below to start the conversation for checkerboard and dot arrays, stage and image analysis micrometers, reticles and machine vision components.

Product

Individual UPC Bar Code Standards

-

Applied Image, Inc.

Applied Image, Inc.

The UPC Verification Calibration standards are a unique set of symbols that assures an exact and reliable primary bar code standard exists for UPC codes based on ANSI X3.182/ISO 15416 methodology. These standards assures that manufactures of verification equipment, scanners, QC labs and end users now have an accurate basis for checking the measurement capabilities of their equipment. These standards are intended as a fundamental calibration tool for an QC program, providing a continuous scale from best to worse case characteristics of each parameter. With complete NIST traceable data supplied, it is ideally suited to those requiring traceability, such as ISO certification. Each symbol is individually calibrated to ANSI X3.182/ISO 15416 standards using a custom built microdensitometer. These cards are supplied calibrated for use with a 6 mil scan aperture and 660nm wavelength. (calibration wit other aperture sizes or wavelengths is available)

Product

Reference Standard

-

Beijing GFUVE Electronics Co.,Ltd.

Beijing GFUVE Electronics Co.,Ltd.

It has been designed for universal laboratory and test applications and is intended for checking and the calibration of reference standards for electrical power and energy.

Product

Charge Coupled Device (CCD) Standard Image Sensors

-

Teledyne e2v

Teledyne e2v

Teledyne e2v is the leading supplier of scientific grade Charge Coupled Device (CCD) image sensors for the most challenging low light imaging and spectroscopy applications.

Product

PXI Standard Programmable Resistor Modules

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Pickering's PXI Standard Programmable Resistor Modules include fully programmable resistor and potentiometer modules for applications such as sensor emulation that require fine adjustment with a resolution down to 0.25 Ohm. All of our Programmable Resistor Modules can easily be formed to make Programmable Potentiometers by connecting two channels in series, using the unconnected terminals as the A and B connections and the link between the two channels as the wiper connection. For applications with more demanding accuracy and resolution requirements, consider our Precision Programmable Resistor Modules .

Product

IEC Standard Burden Sets (Current)

IEC Burden Sets

-

TESCO

IEC Burden Sets - TESCO

Testing and calibrating current transformers often requires standard burdens of reliable accuracy and stability, and burdens that are immune to stray fields and harmonics. These burden sets have been carefully designed to meet these requirements. They also provide the standard burdens required for the testing of current transformers for metering service, and for the testing (within the current rating provided by the sets) of current transformers for relaying applications, all as called for by IEC (International Electrotechnical Commission) Publication 185: 1987.

Product

CDPH Standard Method for VOC Emissions

-

Underwriters Laboratories Inc.

Underwriters Laboratories Inc.

The Standard Method for the Testing and Evaluation of Volatile Organic Chemical Emissions From Indoor Sources Using Environmental Chambers, an expanded standard for what is commonly known as California Specification 01350, is one of the most widely used standards to evaluate building and interior products for low chemical emissions.