Scanning Electron Microscopes
surface imaging from 1 to 5 nm in size.
See Also: Scanning Electron Microscopy, SEM
-
Product
High-power DC Electronic Load (6kW~60kW)
FT68200A/AL/E Series
-
Shenzhen FaithTech Technology Co., Ltd.
FT68200 series high performance high-power DC electronic load provides three voltage ranges 150 V/600 V/1200 V, maximum current 2400 A per single unit, stand-alone power from 4 kW to 60 kW, expandable up to 600 kW, 10000A by master-slave paralleling. Ultra-high power density, 6kW is with only 4U height. Wider operating region, faster dynamic frequency, as well as transient mode, OCP/OPP test, sequence test, automatic test and battery discharge test functions greatly enhances its test strength and expands application coverage. Furthermore, two times instantaneous overpower loading capability can effectively reduces user’s test cost. Built-in standard RS232, RS485, LAN, USB (serial), optional GPIB and CAN interface, supports SCPI, ModBus RTU and CANopen protocol, which facilitates system integrators. FT68200 series has full protection functions, which can be applied to power battery discharge, DC charging station, charging piles, charging pile modules, vehicle On Board chargers (OBC), high-power switching power supplies, power electronics and other power electronics products.
-
-
Product
600 Watt Electronic Load Module
N3306A
Load Module
The Keysight N3306A is a 600 W (0-120A, 0-60V) electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3306A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3306A can also digitize waveforms.
-
Product
Electronic Boards
-
Computer Gesteuerte Systeme GmbH
The relay board 8AGN is a cost-effective board of the CM series, which is also used in our load modules, for example. It can be mounted on a 35 mm DIN rail. Currents up to 1 A at 30 V are possible. The maximum wire cross-section is 0.5 mm².
-
Product
High Current Probes (Power Electronics) HCF73206B200G150
1018696
-
The High Current Probes (Power electronics) HCF73206B200G150 is an advanced solution designed for precise electronic measurements in high current applications. With its basic contact probe design and a pitch of 2.54 mm, it efficiently handles continuous currents up to 20 amperes, ensuring low typical contact resistance of just 10 mOhm. This makes the HCF73206B200G150 ideal for demanding industrial environments where reliability and performance are paramount. It operates over a wide temperature range of -45°C to +200°C, making it versatile for various thermal conditions and applications.
-
Product
High Current Probes (Power Electronics) HCF73206B180G150
1008140
-
The HCF73206B180G150 High Current Probe is designed specifically for high current applications, making it an ideal choice for power electronics testing. This basic contact probe features exceptional performance capabilities with a continuous current rating of 20 Amperes and a typical contact resistance of just 10 mOhms. It operates effectively across a wide temperature range, from -45°C to +200°C, ensuring reliability in diverse environmental conditions. The probe's precision engineering guarantees accurate measurements, with a pointing accuracy of ±0.08 mm, which is critical in high-precision tasks.
-
Product
High Current Probes (Power Electronics) HCF77306B300G300
1005047
-
The High Current Probes (Power Electronics) HCF77306B300G300 are designed for precision and durability in various electronic applications. This basic contact probe features a unique design with a pitch of 3.50 mm, allowing it to operate efficiently within a temperature range from -45°C to +200°C. The specifications highlight its capacity to handle a continuous current of up to 30A while maintaining an impressive typical contact resistance of just 8mOhm. These characteristics ensure reliability in high-performance environments.
-
Product
End Face Inspection Microscopes
D SCOPE EFI – D SCOPE EFI-C – D SCOPE EFI-C LWD
-
The new D Scope EFI for MTP/MPO and multifibers field connectors is a cost effective microscope for inspecting fiber optic patchcords and cassettes.
-
Product
Electronic Brake Meter
BrakeCheck
-
The Bowmonk BrakeCheck is a fully self-contained, portable, battery-powered brake meter that can be used by workshops, government traffic authorities, testing and inspection stations etc. to test and report on vehicle brake efficiency. The unit is MOT approved.
-
Product
Your Automated Microscope For Live Cell Imaging
ZEISS Celldiscoverer 7
-
Combine the ease of use of an automated microscope with the image quality and flexibility of a research microscope. Whether working with 2D or 3D cell cultures, tissue or small model organisms, you will acquire better data in shorter times with this automated live cell imaging platform. Add LSM 900 with Airyscan 2 to gently image dynamic processes with highest framerates in superresolution.
-
Product
Atomic Force Microscope
AFM
-
Atomic Force Microscopes are the most widely used SPM microscopes. They can be applied in fields that span from surface science, semiconductor technology, magnetic media, polymer science, optics to biology, chemistry and medicine.Absolute positioning with an accuracy of 2 nm.
-
Product
Long Range Scanning
-
Our contract measurement services include a variety of short-range (< 20 feet) and long-range (20 to 900 feet) high definition technologies, which use both contact and non-contact processes. With over a decade of experience in long range scanner technologies, we have the experience to determine the most affordable approach to your project and the expertise to do the job right. Our tools for long range scanner services include portable CMMs (PCMM) – both touch probes and laser trackers – and 3D laser mapping scanners.
-
Product
High Current Probes (Power Electronics) HCF32009S135N130
1003498
-
The High Current Probes (Power electronics) HCF32009S135N130 is engineered for precision and durability in power electronics applications. With a pitch of 2.54 mm and capable of operating under extreme temperatures ranging from -45°C to +200°C, this basic contact probe offers reliable performance in diverse environments. Its innovative design allows for a continuous current rating of 12 A and a remarkably low contact resistance of 20 mOhm, making it ideal for high-efficiency systems where minimal resistance is crucial.
-
Product
Life Science Microscope
-
Our product range includes a wide range of smart life science microscope, excel life science microscope, select binocular microscope, crown trinocular life science microscope, classic life science trinocular microscope and premium trinocular microscope.
-
Product
Electron Probe Microanalyzer
JXA-8530FPlus
-
JEOL commercialized the world's first FE-EPMA, the JXA-8500F in 2003. This highly regarded FE-EPMA has long been used in various fields, such as: metals, materials and geology in both industry and academia. The JXA-8530FPlus is a third-generation FE-EPMA that comes with enhanced analytical and imaging capabilities. The In-Lens Schottky field emission electron gun combined with new software provides higher throughput while maintaining high stability, thus allowing a wider range of EPMA applications to be achieved with higher resolution.
-
Product
Electronic Loads
T3EL Series
-
The T3EL series is a family of single channel, 200 & 300 Watt Electronic Loads that are ideal for R&D, product validation and Q&A in a bench or automated environment for low to medium power applications starting from 60mA, such as electronic components, batteries, portable chargers and power products. Electronic Loads are typically used to provide a load to the outputs of a power supply, usually capable of dynamic loading, and are fully programmable. Electronic Loads help designers to test electronic power products and ensure quality, reliability, and performance.
-
-
Product
Area Scan Cameras
-
Area scan cameras, also known as matrix cameras, are one of the most widely used technologies in industrial image processing. They capture images in two dimensions (the X and Y directions) and are ideal for applications requiring a complete image in a single capture.
-
Product
Electronic Autocollimators
-
The concept of autocollimation as an optical instrument was conceived about a century ago for accurate, non-contact measurements of angles. Recent novel photonics upgrades have created a new breed of Autocollimators, offering intricate measurement capabilities for optics, laser profiling, AR/VR/XR goggles alignment, cameras for auto-driving, VCSEL characterization and many more applications with a single instrument packed with multi-tech technologies.
-
Product
Electronic Magnet Pole Finder
MPF-120
-
The hand-held electronic magnetic pole finder / magnetic pole detector that instantly provides a positive reading of N or S polarity. Simple, push-button operation. Just point and read RED indicates NORTH, GREEN indicates SOUTH.
-
Product
Multifunctional DC Electronic Load (CC/CV/CR/CP)
PLZ-5W/5WZ Series
-
The PLZ-5W Series high performance electronic load is the successor to the highly respected PLZ-4W series, whilst still retaining the same high specification and build quality. Advances include a high visibility color display, low voltage operation from a minimum of 1 V to a maximum of 150 V. Programmable profiles of voltage/current can be applied (using the new ARB function, as used in LED/solar testing) in addition to the inherited 6 modes of operation: Constant Current, Constant Resistance, Constant Voltage, Constant Power, Constant Current + Constant Voltage, Constant Resistance + Constant Voltage.
-
Product
Programmable DC Electronic Load - (Economical)
63200E Series
-
The 63200E series are high power DC loads that include a choice of three operating voltages, 150V, 600V and 1,200V, with power levels from 2kW to 24kW and up to 2,000A in a single unit. Power levels can increase up to 240kW when multiple units are paralleled.These high power loads are designed for testing a wide range of EV products including DC charging stations, car battery discharge, on board charger power components, and other power electronics components. With its high power capabilities, parallel control and dynamic synchronization functions make this load ideal for automotive batteries, fuel cells and more. The 63200E load's master/slave control application enables units with the samevoltage specification to be used in parallel and synchronized dynamically to meet the power testing requirements. In addition, a 255-set data storage function has been built-in for recall of the stored settings at any time. When used in automated testing, the save and recall functions can save a great deal of time.
-
Product
64-Channel Boundary-Scan Digital I/O Scan Module
JT 2111/MPV DIOS IDC
Digital I/O
The JT 2111/MPV is a 64 channel boundary-scan digital I/O scan module enclosed in an impact resistant housing. The module is designed to test and control edge connectors, on-board connectors and logic clusters in boundary-scan applications. Multiple modules can be connected serially to increase the number of I/Os. Available with 96-pin DIN 41612 connectors and 20-pin 0.1″ pitch IDC connectors.
-
Product
Flash Vs. Scan
-
A LiDAR system can observe the complete field of view (FOV) at once, called Flash systems. Flash typically works well for short to mid-range (0-100m), and by capturing the complete scene at once also objects with high relative speeds can be detected properly. Another implementation is to focus on a subset of the FOV, consequentially look at the next subsets, until the complete FOV is covered, called Scanning. Scanning can focus the light on the subset instead of the full FOV, and therefore can do object detection at a longer range compared to Flash.
-
Product
High Current Probes (Power Electronics) HCF77306B400G500
1147573
-
Introducing the High Current Probes (Power Electronics) HCF77306B400G500, designed for superior performance with a robust set of specifications tailored for demanding applications in power electronics. This innovative probe is capable of operating in extreme temperatures ranging from -45°C to +200°C, making it a versatile choice for various testing environments. The HCF77306 probe features a basic contact design that ensures reliable and accurate readings, crucial for electronic measurement tasks. With a continuous current rating of 30A and a typical contact resistance of just 8mOhm, it guarantees minimal energy loss and peak efficiency during operation.
-
Product
3D Video Microscope
BVM-20104
-
The microscope is configured with 1.3M HD industrial camera. VGA image output interface, can be connected to the computer and monitor directly. clear and vivid image, taking photos, SD card storage, auto exposure. Camera is equipped with remote control panel, which makes the operation much easier. Optical lens keep parfocal under zoom, there is no deviation for center; 3D rotary observation
-
Product
High Current Probes (Power Electronics) HCF77512A400U300
1016236
-
The High Current Probes HCF77512A400U300 are precision instruments designed for power electronics applications, boasting a robust and versatile design suited for various testing environments. With a high-temperature tolerance ranging from -45°C to +200°C, these probes ensure reliability in diverse conditions. Featuring a pitch of 5.00 mm (197 mil), they are engineered to deliver exceptional performance in accuracy and stability. The solid construction allows continuous current handling up to 50 A, while maintaining a typical contact resistance of just 5 mOhm, making them ideal for high-performance applications.
-
Product
Spectroscopy Upgrade for Any Microscope
SMS
-
Get a simple upgrade to your existing microscope, or a turnkey microspectrophotometer system that works out-of-the-box.
-
Product
Atomic Force Microscope for SEM/FIB
AFSEM® AFM Insert
-
AFSEM is an atomic force microscope (AFM), designed for integration in a SEM or Dualbeam (SEM/FIB) microscope. Its open access design allows you to simultaneously operate SEM and AFM inside the SEM vacuum chamber. The correlated image data of AFM and SEM enable unique characterization of your sample, and the combination of complementary techniques is a key success factor for gaining new insights into the micro and nano worlds. AFSEM enables you to easily combine two of the most powerful analysis techniques to greatly extend your correlative microscopy and analysis possibilities.
-
Product
High Current Probes (Power Electronics) HCB085A11MG4
1012158
-
The High Current Probes (Power electronics) HCB085A11MG4 is designed for robust electrical connections in various high-performance applications. This basic contact probe boasts a compact design with a total length of just 8.90 mm and a projection height of 4.90 mm, making it suitable for precise insertion and reliable contact. With a wide temperature operating range from -45°C to +200°C, the HCB085A11MG4 can withstand harsh environments while ensuring optimal performance. This probe features a nominal travel of 1.00 mm and a maximum travel of 1.20 mm, providing flexibility for different application requirements.
