Showing results: 5611 - 5625 of 7331 items found.
-
Phekda Series -
OtO Photonics Inc.
The Phekda (PD) Series spectrometers consist of CCD/CMOS sensors and 32-bit RISC microcontrollers. This series features a new T-R-T (Transmissive-Reflection-Transmissive) optical design, simple and optimized for LIBS or high resolution requirement. The optical bench is very rigid and stable for measurement system and has outstanding stability of thermo-hydro variation, vibration and shock on resolution and wavelength shift performance.
-
CameraModule -
OtO Photonics Inc.
Series is built with the linear back-thinned 2048 x 64 pixels CCD type sensor and high performance 32bits RISC controller in. CM series contains a Thermal Electric Cooler (TEC) along with cooling system design to reduce dark current and maintain a lower stable operating temperature. CM Series has outstanding sensitivity, high SNR ratio, high dynamic range, low electrical-heat noise and fast spectrum responds, suitable for 785 nm laser 2800 cm-1(790~1010nm) or 3500 cm-1(790~1090 nm) Raman application and long wavelength measurement (180~1100 nm).
-
LS-BA -
OtO Photonics Inc.
Balance Light Source (LS-BA) is designed for transmittance and absorbance measurement with color information. Halogen Light source provides the stable and smooth wide-band spectral output. It’s proper for most visible to near infrared range measurement. The efficiency of blue region will be enhanced by extra two blue LEDs.
-
LS-DH -
OtO Photonics Inc.
Deuterium-Halogen Light Source (LS-DH) is a combination of Deuterium Light source and Halogen light source. Deuterium light source is proper for UV range measurement and Halogen light source is proper for visible and near infrared region measurement. The light source output is standard SMA905 and can be attached to the fiber directly.
-
UltraMicro -
OtO Photonics Inc.
spectro-module is constructed by a new invented technology and can provide high optical resolution and fast spectral response. The optical engine is very simple and optimized for the spectrometer. The optical bench is very rigid and stable for measurement system. The compact size is very flexible for system integration.
-
LS-HA -
OtO Photonics Inc.
provides the stable and smooth wide-band spectral output. It’s proper for most visible to near infrared range measurement. This light source is also designed to be used in the standard measurement package. It ‘s a simple and quick measurement platform.
-
PKG -
OtO Photonics Inc.
Spectral Measurement Kit (Package, PKG) offers complete accessories that can fully meet the absorbance, transmittance, fluorescence, color, concentration and other measurement needs. You can choose light sources: LS-HA、LS-BA、LS-DH-2，and OtO spectrometers: SmartEngine(SE)、EagleEye(EE)、Sidewinder(SW) for different applications.
-
Extech MO265 -
Extech Instruments Corporation
MO265 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75 in. (22mm) below the surface. In addition, a remote pin probe is included to measure moisture in difficult to access places. Complete with 9-Volt battery, replacement pins, remote pin probe, protective cap, and pouch case.
-
Extech MO260 -
Extech Instruments Corporation
MO260 is a Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using the direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75" (22mm) below the surface. Complete with 9V battery, replacement pins, protective cap, and pouch case.
-
Extech MO55 -
Extech Instruments Corporation
Take quick Moisture measurements on wood and building materials with choice of pin or pinless (non-invasive) method. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings.
-
Extech MO257 -
Extech Instruments Corporation
Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <0.78" (20mm) with Extech's MO257 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with automatic calibration of the meter when powered on. Large backlit triple LCD displays moisture reading and Max and Min readings. User can adjust two alarm levels where it will show visual alert with flashing “RISK” or “WET” indicators with beeper alert. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A must have tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.
-
Extech MO210 -
Extech Instruments Corporation
This Pocket Moisture Meter from Extech allows you to quickly assess whether wood and other porous materials have endured any water incursion. Simply push the sharply pointed electrode pins into the surface of sheetrock, drywall, wallboard, concrete, mortar, plaster or other building materials and the device will detect moisture levels between 0.2% to 2.4%. Slide the material-selection switch to wood and the handheld meter will determine moisture presence in timber from 6% to 44%. Complete with protective cap, replacement pins, and three CR-2032 button batteries.
-
Extech MO57 -
Extech Instruments Corporation
Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <4" (100mm) with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A musthave tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.
-
Extech MO280 -
Extech Instruments Corporation
The MO280 provides Non-invasive moisture measurements in wood and other building materials with virtually no surface damage. Meter uses electro-magnetic technology to quickly indicate the moisture content of wood and building materials. Select from 10 wood types and measurement ranges. The LCD displays % moisture of wood or material being tested. It has a measurement depth to 0.75 in. (22mm) below the surface. The meter also features an automatic internal test and calibration and low battery indication. Complete with 9V battery and pouch case.
-
Extech MO220 -
Extech Instruments Corporation
The MO220 is specifically designed for monitoring moisture in wood. Memory contains 8 wood groups with calibrations for approx. 170 species of wood. Measurements can be taken using the integral pin electrodes or the included heavy duty remote probe. Automatically temperature compensated (ATC) readings when used with the temperature probe. Built-in calibration check, replaceable measurement electrode pins, user settable Auto Power off (1 to 9 minutes) with disable, and Low battery indication. Complete with protective cap, temperature probe, heavy duty remote moisture probe, replacement pins, two AAA batteries, and soft case.
