Showing product results. 1 - 15 of 23 products found.
-
Dubhe - OtO Photonics Inc.
Series spectrometers are designed for the high-resolution, high-sensitivity measurements required by Optical Coherence Tomography (OCT) applications. This new series features a new transmissive optical design with an improved integrated body, employing patented alignment mechanism to deliver ultra-high (0.04nm) optical resolution. It is available in two versions with different CMOS camera max line rates: 80kHz or 20kHz, catering to different application needs. The DB series uses a transmission grating and a fully transmissive Czerny-Turner optical design to deliver high optical resolution, high sensitivity, low dispersion, and high-speed spectrum response.
-
Phekda Series - OtO Photonics Inc.
The Phekda (PD) Series spectrometers consist of CCD/CMOS sensors and 32-bit RISC microcontrollers. This series features a new T-R-T (Transmissive-Reflection-Transmissive) optical design, simple and optimized for LIBS or high resolution requirement. The optical bench is very rigid and stable for measurement system and has outstanding stability of thermo-hydro variation, vibration and shock on resolution and wavelength shift performance.
-
CameraModule - OtO Photonics Inc.
Series is built with the linear back-thinned 2048 x 64 pixels CCD type sensor and high performance 32bits RISC controller in. CM series contains a Thermal Electric Cooler (TEC) along with cooling system design to reduce dark current and maintain a lower stable operating temperature. CM Series has outstanding sensitivity, high SNR ratio, high dynamic range, low electrical-heat noise and fast spectrum responds, suitable for 785 nm laser 2800 cm-1(790~1010nm) or 3500 cm-1(790~1090 nm) Raman application and long wavelength measurement (180~1100 nm).
-
LS-BA - OtO Photonics Inc.
Balance Light Source (LS-BA) is designed for transmittance and absorbance measurement with color information. Halogen Light source provides the stable and smooth wide-band spectral output. It’s proper for most visible to near infrared range measurement. The efficiency of blue region will be enhanced by extra two blue LEDs.
-
LS-DH - OtO Photonics Inc.
Deuterium-Halogen Light Source (LS-DH) is a combination of Deuterium Light source and Halogen light source. Deuterium light source is proper for UV range measurement and Halogen light source is proper for visible and near infrared region measurement. The light source output is standard SMA905 and can be attached to the fiber directly.
-
UltraMicro - OtO Photonics Inc.
spectro-module is constructed by a new invented technology and can provide high optical resolution and fast spectral response. The optical engine is very simple and optimized for the spectrometer. The optical bench is very rigid and stable for measurement system. The compact size is very flexible for system integration.
-
LS-HA - OtO Photonics Inc.
provides the stable and smooth wide-band spectral output. It’s proper for most visible to near infrared range measurement. This light source is also designed to be used in the standard measurement package. It ‘s a simple and quick measurement platform.
-
PKG - OtO Photonics Inc.
Spectral Measurement Kit (Package, PKG) offers complete accessories that can fully meet the absorbance, transmittance, fluorescence, color, concentration and other measurement needs. You can choose light sources: LS-HA、LS-BA、LS-DH-2,and OtO spectrometers: SmartEngine(SE)、EagleEye(EE)、Sidewinder(SW) for different applications.
-
Sliver Bullet Series - OtO Photonics Inc.
Series spectrometers consist of CMOS sensors and 8-bit 8051 microcontrollers. This series features a new concave mirror optical design with an improved integrated small, light and handy body. The CPU of SB series is 8051, which can provide shorter integration time, faster readout speed, high Accuracy of sensor trigger timing and low power consumption.
-
HummingBird - OtO Photonics Inc.
spectrometer is built with the linear CCD/COMS array sensor and 32bits RISC controller in. By simplification of the optical engine, the miniaturized spectrometer is achieved. It has three type of Light entrance, the user can choice Lens Tube, SMA905, or no entrance depends on needs. External MB type of HB Series can be chosen to enhance heat dissipation. The compact size and various of screw holes is very flexible for system integration.
-
PocketHawk-NIR - OtO Photonics Inc.
Pocket Hawk - Near-infrared Series (PH-NIR) spectrometer is built with the InGaAs linear array sensor and 32bits RISC controller. By simplification of the optical engine and specific sensor, the further miniaturized spectrometer is achieved. External MB type of PH-NIR Series can be chosen to enhance heat dissipation. The compact size and various of screw holes is very flexible for system integration.
-
Red Bullet Series - OtO Photonics Inc.
Series spectrometers consist of CMOS sensors and 8-bit 8051 microcontrollers. This series features a new concave mirror optical design with an improved integrated small, light and handy body. The CPU of RB series is 8051, which can provide shorter integration time, faster readout speed, high Accuracy of sensor trigger timing and low power consumption.
-
PocketHawk - OtO Photonics Inc.
spectrometer is built with the linear CCD array sensor and 32bits RISC controller. By simplification of the optical engine and specific sensor, the further miniaturized spectrometer is achieved. External MB type of PH Series can be chosen to enhance heat dissipation. The compact size and various of screw holes is very flexible for system integration.
-
RedSparrow - OtO Photonics Inc.
spectrometer is constructed by MEMS technology and designed for near infrared region. It can provide high optical resolution and fast spectral response and the compact size is very flexible for system integration, portable and handheld.
-
SideWinder - OtO Photonics Inc.
spectrometer ,built with the InGaAs type sensor and high performance 32bits RISC controller in, is specially designed for long wavelengths range. The optical engine is very simple and optimized for the spectrometer. The optical bench is very rigid and stable for measurement system, especially SW series has outstanding stability of thermo-hygro variation, vibration and shock on resolution and wavelength shift performance. The compact size is very flexible for system integration.