Filter Results By:





read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers

Showing recent results 991 - 1005 of 4259 products found.

  • PID Controller

    Liquid Instruments

    Liquid Instruments' new instrument features real-time frequency-domain conDesign your control system's frequency response using the interactive Bode plotBlock diagram view of the digital signal processing with built-in probe points for signal monitoring2 input channels, 2 output channels with control matrix for blending inputsIncludes single or double integrators and differentiators with low- and high-frequency gain saturationtrol system design capabilities.

  • Potentiostat / Galvanostat / Impedance Analyzer

    PalmSens4 - PalmSens BV

    PalmSens4, is a USB and battery powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. This instrument is a complete laboratory instrument but its compact and rugged design makes it also ideal for field work.

  • PQ Meters

    Algodue elettronica

    Additional voltage and current measurement channels in comparison with other standard three-phase devices.Current inputs for CTs or for clamps to grant an accurate current measurement.Continuous monitoring of the power quality and Class A certified measurements for voltage characteristics.Simultaneous recording of events, Min/Avg/Max LOG and energy counters.Several possibilities for instrument data transmission: Ethernet, Modbus TCP, 3G network.User-friendly instrument web interface with multilingual pages.

  • Spectroscopy

    Andor Technology Ltd

    Engineered from the outset with “ease-of-use” in mind, every Andor Spectroscopy system features a combination of market leading detectors and spectral instruments, seamlessly controlled through Andor’s dedicated and intuitive Solis software platform. From configuration of these pre-aligned, pre-calibrated instruments to integration into each unique laboratory set-up, Andor Spectroscopy solutions allow researchers around the world to focus quickly on their own challenges.

  • Standard CT

    6300A - Eltel Industries

    The Model 2509 Instrument Current Transformer is a 6300 A ampere CT designed for precision measurement of AC current or for Instrument Current Transformer calibration applications. The CT can be installed on a bus bar or it can be used with a primary conductor consisting of number of turns. The 6300 CT is designed with a tapped primary & a tapped secondary winding, thus providing a large number of ratios over a range of 5 to 6300 amperes.

  • Temperature Measurement System

    TMM-100 - Thermal Engineering Associates, Inc.

    The self contained TMM-100 module accepts diode, thermocouple and thermistor temperature sensors. The USB-connected instrument is supplied with Windows™ 7, 8 & 10 compatible software that provides for sensor measurement on a cyclic basis and for data logging of all measured values. LabVIEW™ Virtual Instrument (VI) drivers are available as an extra cost option for users that wish to incorporate the TMM-100 into an application-specific measurement environment.

  • Test Finger Apparatus


    SCR ELEKTRONIKS focuses on designing a solution around the end use at her customer. Instead of offering a standard instrument for a specific task, we have an approach of customizing the test bench to target the specific goals of the process or test procedure. Our measurement instruments, test modules, electrical power systems & software libraries are developed with this vision, thereby reducing the test system’s time-to-deploy.

  • Thickness Gauges

    Bristol Instruments, Inc.

    Bristol Instruments'' optical thickness gauges are a simple and non-destructive way to precisely measure thickness of a variety of transparent and semi-transparent materials. Thickness information is critical in the development and production of materials such as contact and intraocular lenses, and medical products including balloon catheters, stents, bags, and tubing. Bristol combines high accuracy with straightforward operation and rugged design to make these instruments ideal for both laboratory and manufacturing environments.

  • Marshall Stability Tester

    SG-W16 - Jinge Testing Machine Co.,Ltd

    This instrument is suitable for determining the stability and flow rate of thermal stability and resistance to plastic deformation of asphalt mixtures. It provides accurate basis for the composition ratio design of asphalt mixture; the machine automatically loads and automatically draws the load and deformation of the test piece. The instrument has the characteristics of simple operation, high measurement accuracy and high degree of automation. Suitable for traffic engineering, universities and research departments.


    Precision Mastech Enterprises Co.

    This is an intelligent multiple function digital counter. It is controlled by an 8-Bit microcontroller and with eight-digit LED high bright display. Four measuring functions of frequency, period, totals and self-check are involved in this counter. There is a 10MHz OSC.OUT. The input signal can be conditioned by attenuation.Two kinds of power 110VAC and 220VAC can be supplied to the instrument. The user can conveniently select it. This instrument has been designed according to IEC1010-1 concerning safety requirements.

  • Thermal Microclimate Data Logger

    HD32.1 - Delta OHM S.r.L.

    The HD32.1 Thermal Microclimate is a data logger multifunction instrument to measure the microclimate in moderate, hot, severe hot, cold environments and the measure of physical quantities. It is provided with 8 inputs for probes equipped with SICRAM module and a back-lighted graphic display. It has been designed for microclimate analysis in the workplace; the instrument is used to detect the necessary parameters to establish if a certain workspace is suitable to perform certain activities.

  • Manometers

    GAO Tek Inc.

    GAOTek has developed advanced manometers that are high quality, affordable, and accurate. They are versatile instruments designed for the measurement of different pressure levels. We have a wide variety of manometers available for measuring the pressure of both liquids and gases whilst maintaining ease of use. Manometers are used as a pressure instrument and for calibration of other instruments. They can be used to measure gauge pressure, differential pressure, and absolute pressure and are generally used to measure pressures as high as 100 inches of 2.95 Red Fluid (10.65 PSI). Our products are designed to bring users the best experience when it comes to measurement, emphasizing effectiveness and efficiency above all else, and are for sale to the United States, Canada and globally.

  • Rubber Rheometers

    TA Instruments

    Virtually every aspect of a rubber material’s processing and performance characteristics is influenced by its rheological properties. TA Instruments provides a complete range of rotorless shear rheometers and curemeters to help you optimize processing, curing, and application performance. All TA Instruments rubber rheometers are manufactured to exacting mechanical standards and with the latest measurement technology for the most accurate, reliable, and reproducible data available. Available automation systems allow for maximum unattended laboratory productivity in all test environments. Relevant ASTM, DIN, and ISO standards are easily met, as are demands for advanced testing, making these instruments the ideal choice for quality control, analytical, and research needs.

  • Novo-Haze TX Transmission Hazemeter

    Hanatek Instruments

    Fast and accurate measurement of the optical quality of plastic films and other transparent materials.This instrument measures total transmission and haze according to ASTM D1003 (CIE C), the most important standard used in most QA applications.Manufactured in direct response to industry requirements, the Novo-Haze TX is offered at huge savings compared to other instruments which contain additional superfluous test methods.The instrument features an intuitive user friendly interface which minimises the test time and makes it an ideal choice for both QC and R&D.Uncompromising design, high quality materials and European manufacture make the Novo-Haze TX the ideal choice for any laboratory or QA environment.

  • Manometers

    Test Products International, Inc.

    Single input vacuum gauge. 12,000 to 15 micron measurement range. 300 PSI over pressure. A safer instrument for your job.