Product

Decade Box, Calibrated W/Data, Resistance, 7, 1ohm to 11.11111Mohm, 1 %

72-7270 CAL D

-

Tenma

72-7270 CAL D - Tenma

The 72-7270 CAL D from Tenma is a resistance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set resistance value from 1 to 11,111,110 ohm in one ohm increments. The decade accuracy is ±1% resistors used throughout. It has weight of 320g/0.70lb and dimension 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

Automated Temperature Resistance Standard

-

Measurements International Ltd.

Measurements International Ltd.

Exceptional Stability, Cost-effectiveness, Performance-based Results, 10 Ω, 25 Ω, 100 Ω, 200 Ω, 400 Ω and 1000 Ω Internal Standards, Built-in Temperature Chamber for Optimal Performance.

Product

24" Drawer With Writing Surface, Unshielded, 5.25"H X 30"D

DR-052430-S

-

ELMA Electronic, Inc.

DR-052430-S - ELMA Electronic, Inc.

Unshielded drawers with writing surface are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock.

Product

Digital Earth Resistance Tester, ERT-1502

-

Neutronics Manufacturing Co.

Neutronics Manufacturing Co.

Our Earth Tester is a very successful replacement of the conventional generator type hand tester. This device is most extensively used to test the earthing installation in numerous power based industries, electrical traction systems and telecommunication networks.

Product

Digital Earth Resistance Tester

8020 ER

-

Standard Electric Works Co., Ltd

8020 ER - Standard Electric Works Co., Ltd

● Capable of measuring earth resistance and earth voltage. ● 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test.● Frequency : 820Hz.● 0Ω adjustment.● Battery operated.● Data hold function.● Low battery indication.● Calibration performed with supplied test leads.● Simplified measurement probe is also provided for two-wire measuring method.

Product

Surface Photovoltage

-

KP Technology

KP Technology

The surface photovoltage spectroscopy modules are the perfect all-in-one solution for in-depth studies of light sensitive materials such as organic semiconductors, solar cells or light sensitive dyes.

Product

Handheld Contact Resistance Tester

-

Weshine Electric Manufacturing Co., Ltd

Weshine Electric Manufacturing Co., Ltd

The hand-held Circuit resistance tester is an innovative product. The product is compact, hand-held operation, battery power supply, easy to carry. The product is mainly used in the measurement of contact resistance and other micro-Euclidean resistance of switch contacts. The test speed is fast and the accuracy is high.

Product

3 Wire (Digital) Earth Resistance Tester

1820 ER

-

Standard Electric Works Co., Ltd

1820 ER - Standard Electric Works Co., Ltd

● Capable of measuring earth resistance and earth voltage.● 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test.● The test leads are supplied as standard accessories for simplified two-wire measuring system.● Battery operated.● Data hold function.● Low battery indication.● Calibration performed with supplied test leads.

Product

Terminal High Resistance

-

Guildline Instruments Ltd

Guildline Instruments Ltd

Terminal High Resistance Standards that can be rack or bench mounted. The 6636 Series provides a set of customer chosen precision resistance standards enclosed in a temperature controlled chamber.

Product

Winding Resistance Meter 50Amps, 2 Channels

WR50-12

-

Raytech AG

WR50-12 - Raytech AG

Raytech Digital Winding Resistance meter WR50-12 is the enhanced version winding resistance system with a most advanced demagnetizing circuit. It is designed for high degree of accuracy for the measurement of very low resistance of any inductive loads.

Product

Fixed Writing Surface for 19" RA Cabinet

WSA-119

-

ELMA Electronic, Inc.

WSA-119 - ELMA Electronic, Inc.

This fixed shelf / writing surface for a single-bay RA cabinet spans the full width of the cabinet and extends 18” in front.

Product

IEC60558 Insulation Material Layer Abrasion Resistant Test Device

CX-J16

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-J16 - Shenzhen Chuangxin Instruments Co., Ltd.

This test is conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16.The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish.

Product

Resistive AC Load Bank

-

Junxy Energy

Junxy Energy

AC load bank testing offers you whole solutions of predictive failure analysis for UPS(uninterrupted power supply), generator, transformers, PV system, inverter etc, to validate the condition and output of such power systems comprehensively. Integrated AC & DC load bank could be made in one unit or separately with different load voltages as per your need for different applications.

Product

Fixed Writing Surface for 24" RA Cabinet

WSA-124

-

ELMA Electronic, Inc.

WSA-124 - ELMA Electronic, Inc.

This fixed shelf / writing surface for a double-bay RA cabinet spans the full width of the cabinet and extends 18” in front.

Product

High Coil Resistance Reed Relays

Series 118

-

Pickering Electronics

Series 118 - Pickering Electronics

The Pickering Series 118 is a range of very sensitive reed relays that are ideal for portable electronic instruments or other applications where low power consumption and a very small footprint is important. They have 5 volt coils with a resistance up to 2200 Ohms and the option of an internal diode.

Product

Winding Resistance Meter 100Amps, 3 Channels

WR100-13R

-

Raytech AG

WR100-13R - Raytech AG

Raytech Digital Winding Resistance meter WR100-13R is the enhanced version winding resistance system with a most advanced demagnetizing circuit as a rack version. It is designed for high degree of accuracy for the measurement of very low resistance of any inductive loads.

Product

Oil Resistivity & Tan Delta Test Set-Up

-

NEO TELE-TRONIX PVT. LTD

NEO TELE-TRONIX PVT. LTD

This testing set is an automated instrument, widely used for measuring electrical characteristics of insulating liquids, transformer oil and other insulating material samples.

Product

Floor Resistance Test Kit

PMK-152

-

Prostat Corporation

PMK-152 - Prostat Corporation

The PMK-152 Floor Resistance Test Kit contains the instruments you need to take resistance measurements.The PMK-152 includes Prostat's PRS-812 Resistance Meter with 5 pound conductive rubber electrodes. You can take measurements at 10 and 100 volts with accuracy within ±5%.

Product

Laser Doppler Surface Velocity Meter

LV-7000 series

-

Ono Sokki

LV-7000 series - Ono Sokki

The LV-7000 series detects speed, uneven speed, distance, length of moving object or rotating object without contact. By contacting with 2 sensors, it enables to calculate difference in velocity/length between the two points in real time and output with 3,000 ppm of accuracy. The frequency response can be expanded up to 20 kHz, which achieves to understand phenomena and evaluate mechanical systems at high speed, efficiently, and accurately. It is useful for evaluation of motor control and behavior measurement, improving parts quality, and reducing loss of material.

Product

Resistivity Meter for Concrete

Ohmcorr Test System™

-

James Instruments Inc.

Ohmcorr Test System™ - James Instruments Inc.

OhmCorr has two probes spaced 1.97" (5cm) apart which are placed in holes drilled to a depth of 3/8th" (8mm) and filled with conductive gel. The direct digital read-out of resistivity is displayed on the LCD when the control switch is activated. OhmCorr and CorMap, when used together, provide an economical and sound diagnostic system of corrosion in reinforced concrete.

Product

BET Flowing Gas Surface Area Analyzers

SA-9600 Series

-

HORIBA, Ltd.

SA-9600 Series - HORIBA, Ltd.

The surface area of a material is, in many cases, as important as the chemical properties. As particle size decreases, surface area increases. Porosity of materials - from micropores to macropores - contribute even more to the total surface area. The interface at the surface is what defines how a solid reacts to other substances, be they gases, liquids, or solids.Surface area can impact shelf life, stability, dissolution and efficacy of pharmaceutical powders and tablets. Likewise, surface area can affect the rheological properties and hiding powers of pigments, paints, and coatings. It has a significant impact on the ability for materials like catalysts, adsorbents, filtration materials and air separation products to react in the designed application. Ceramics used in applications ranging from; dinner plates, to dental implants, to electronics, all are affected by surface area.

Product

Surface Thermography

-

Advanced Thermal Solutions, Inc.

Advanced Thermal Solutions, Inc.

Liquid Crystal & Surface Thermography Systems for Temperature Mapping Studies.

Product

Portable Surface Roughness Tester Profilometer

SRG-4000

-

Phase II Plus

SRG-4000 - Phase II Plus

The latest in state-of-the-art surface roughness testers profilometer, the SRG-4000 is designed with the shop environment in mind. These surface roughness testers profilometer are distinguished by a high level of accuracy, multiple parameters and simplicity of operation. Extremely sensitive and highly accurate readings from this Phase II surface roughness tester are offered via multiple surface roughness profilometer parameters, Ra, Rq(Rms), Rt and Rz.

Product

Concrete Bulk Resistivity

RCON

-

Giatec Scientific Inc.

RCON - Giatec Scientific Inc.

Giatec RCON™ is a non-destructive device for measuring the electrical resistivity of concrete specimens in the laboratory without any additional sample preparation requirements. This measurement can easily be made on the same concrete samples that are currently used for the compressive strength testing of concrete.

Product

Digital Earth Resistance Tester

ERT-1501

-

Neutronics Manufacturing Co.

ERT-1501 - Neutronics Manufacturing Co.

Electronic Digital Earth Resistance Tester is direct replacement of the conventional hand generator type tester. It is designed for measurement of the resistance of earthing used in the electrical equipment as well as for measurement of ground resistivity. It can be used for measurements of the other low regular and liquid resistances. It can also be used for measurement of voltage AC, voltage DC and resistance. This instrument finds wide application for testing earthing installation in power based industries, telecommunication networks and electrical traction systems etc.

Product

Resistance Thermometry Bridges

-

Mensor Corp.

Mensor Corp.

By using built-in or external standard resistors, resistance thermometry bridges measure resistance ratios with high accuracy, which are indicative of the temperature, among other things. These instruments are not only used in the field of temperature measurement, but − due to their high accuracy − also in electrical laboratories.