Product

Standard Accessories for PP005

PK102

-

Teledyne LeCroy

PK102 - Teledyne LeCroy

Standard Accessories for PP005.

Product

Standard High Speed A/D Converters

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices high speed A/D converters (ADCs) offer the best performance and highest sampling speed in the market. The product offerings include low IF A/D converters (20 MSPS to 125 MSPS), high IF a/d converters (125 MSPS to 1.3 GSPS), and wideband ADCs (>1 GSPS). The high speed a/d converter portfolio offers cost and performance optimized solutions for various applications such as communications infrastructure, electronic test and measurement, and aerospace and defense.

Product

Insulation Resistance Tester

UDH-50-1-T

-

UDEYRAJ ELECTRICALS PRIVATE LIMITED

UDH-50-1-T - UDEYRAJ ELECTRICALS PRIVATE LIMITED

utomatic-microcontroller operated• Standard test voltages-0.5kV, 1kV, 2.5kV, 5kV • Resistance range to 1TΩ • Continuous digital display on LCM• Test modes: Insulation resistance,PI (Polarization Index)AR (Dielectric Absorption Ratio)(PI and AR automatically calculated)

Product

Resistance Temperature Detectors (RTD) Simulators

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

Simulation of resistance based temperature sensors such as positive or negative temperature coefficient thermistors. Resistance Temperature Detectors (RTDs) can be wire-wound or thin film. Our RTD simulator modules provide a cost-effective method of simulating both PT100 and PT1000 RTD sensor types that require fine setting resolution.

Product

Transformer Winding Resistance Tester

KRI 9310

-

Kingrun Instrument Co., Ltd.

KRI 9310 - Kingrun Instrument Co., Ltd.

KRI 9310 adopt Kelvin four-wire testing method, which effectively eliminates the influence of the resistance of the test line on the test results. It can be able to increases the current to 10A by which can test extremely low resistance to 0.01 Ω(such as amorphous alloy, Copper-nickel, nickel-chromium-iron, iron-chromium-aluminum etc). For the tested objects with high resistance value (CT/PT), the instrument can extend the range to 20 kΩ，so the wide resistance test range enables KRI9310 can cover 80% of the power transformer products on the market and switchgear bus-bar cable etc. The power of the tester use the built-in rechargeable lithium battery that can test hundreds of transformers by one time charging.

Product

UV Resistance Test Chamber

-

MRC ltd.

MRC ltd.

The UV Weather resistance test chamber is the world’s most widely used weathering tester to test types of damages include color change, gloss loss, chalking, cracking, crazing, hazing, blistering, strength loss and oxidation.

Product

Insulation Resistance Testers < 1 kV

-

Megger Group Ltd.

Megger Group Ltd.

With over twenty 1-kV models to choose from, selecting the proper Megger insulation tester can appear a bewildering task at first. Actually all the process requires is a little organization. All Megger insulation testers perform essentially the same test in fundamentally the same manner - accurately and reliably. Refinements and added features, however, separate one model from another in application and operator appeal.

Product

Digital Surface Resistance Test Kit

PAS-853BRM

-

Prostat Corporation

PAS-853BRM - Prostat Corporation

- Surface Resistance Kit from 0.01 ohm to 9.99x1012 ohms- Nominal Full Range Tolerance Averages <±5%- Fully Automatic Resistance Range, Test Voltage and Electrification Period control- Determines if a surface is Dissipative, Conductive, or Insulative- Measures resistance point-to-point(Rtt) and point-to-ground (Rtg)- Measures resistance of Static Control Floors, ESD Work Surfaces and Packaging Material- Conforms to all ESD Association Standards for Resistive Characterization- Includes 2 each Conductive Rubber Electrodes- Packaged in a hard shell Carrying Case- Certificate of Calibration Traceable to NIST included

Product

Open Standard Module (OSM)

ROM-2620

-

Advantech Co. Ltd.

ROM-2620 - Advantech Co. Ltd.

Advantech ROM-2620 OSM 1.1 Computer-on-Module is powered by NXP i.MX 8ULP SoC which includes up to 2 Arm Cortex-A35 cores in combination with one Cortex-M33 real timeprocessor and Vivante GC7000 nanoULTRA/GC328 graphics engine. It provides USB2.0, Fast Ethernet, MIPI-CSI, I2C, SPI, GPIO, PWM and MIPI DSI display for embedded applications

Product

DC Resistance Tester

DCSS502BC

-

Sanshine Electronis Co., Ltd.

DCSS502BC - Sanshine Electronis Co., Ltd.

Resistance meter is designed to measure copper resistance of transformers, wires, cables, other conductors and other coil products etc. It is widely used of low resistance measurement of switches, heater wires, transformers, relays, motors, electric films and PC circuit boards, wires, cables, etc. With reliable Good/ NG judgement, it is a premier resistance meter for the use in production line or QC department.

Product

Standard 1.08 (31.00) - 4.00 (114.00) Long Travel Bead Probe

BPLT-25C-4

-

ECT

BPLT-25C-4 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 350Full Travel (mm): 8.89Recommended Travel (mil): 317Recommended Travel (mm): 8.05Mechanical Life (no of cycles): 500,000Overall Length (mil): 1,460Overall Length (mm): 37.08Full Travel Remark: Standard Spring: 400 mil / 10,16 mm, Alternate Spring 400 mil / 10,16 mm, High Spring: 400 mil / 10,16 mm, Ultra High Spring: 350 mil / 8,89 mm

Product

Concrete Bulk Resistivity

RCON

-

Giatec Scientific Inc.

RCON - Giatec Scientific Inc.

Giatec RCON™ is a non-destructive device for measuring the electrical resistivity of concrete specimens in the laboratory without any additional sample preparation requirements. This measurement can easily be made on the same concrete samples that are currently used for the compressive strength testing of concrete.

Product

Standard Ground Lead for PP0x7 Series

PK007-002

-

Teledyne LeCroy

PK007-002 - Teledyne LeCroy

Standard ground lead for PP0x7 Series

Product

Standard RF Fixture

-

Accel-RF Corporation

Accel-RF Corporation

The standard RF fixture supports both pulsed and non-pulsed operation. It employs SMA input/output connections. For RF output powers over 10W, an N-type connector may be used to replaces the SMA connector because of its power-handling capability.

Product

Winding Resistance Meter 50Amps, 2 Channels Rack

WR50-12R

-

Raytech AG

WR50-12R - Raytech AG

Raytech Digital Winding Resistance meter WR50-12R is the enhanced version winding resistance system with a most advanced demagnetizing circuit as a rack version. It is designed for high degree of accuracy for the measurement of very low resistance of any inductive loads.

Product

Electrometer / High Resistance Meter, 0.01fA

B2985B

-

Keysight Technologies

B2985B - Keysight Technologies

The B2985B Electrometer/High Resistance Meter is the world’s only graphical electrometer that allows you to confidently measures small currents with 0.01 fA (0.01 x 10-15 A) resolution and large resistances of up to 10 PΩ (10 x 1015 Ω). It possesses a 4.3” color LCD with a graphical user interface that provides trend chart and histogram data in addition to numeric information.

Product

Insulation Resistance Meter

SME1202

-

Scientific Mes-Technik Private Ltd

SME1202 - Scientific Mes-Technik Private Ltd

General purpose insulation resistance meter Analog indicator, High measurement speed Test voltage range: 10 V to 1000 V Suitable for Testing capacitor insulation test Easy operation

Product

Calibrated Diffuse Reflectance Standards

-

Gigahertz-Optik GmbH

Gigahertz-Optik GmbH

Diffuse reflection calibration standards in synthetic ODM and ODMP material

Product

NanoCD Standards (NCD)

-

VLSI Standards, Inc.

VLSI Standards, Inc.

The NanoCD™ (NCD) is the first commercially available standard to provide line width accuracy calibration at the 45 nm, 65 nm, 90 nm and 130 nm nodes. Use these standards for tool matching, calibrating the width of a CD-AFM tip, or CD-SEM diagnostics.

Product

Insulation Resistance Meter

1503

-

Fluke Corporation

1503 - Fluke Corporation

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

Product

Winding Resistance Meter

TRM 50+

-

Scope T&M Pvt, Ltd.

TRM 50+ - Scope T&M Pvt, Ltd.

SCOPE introduces 50 A state of the art precision winding resistance meter, specially designed for field testing as well as factory testing of large transformers up to 500 MVA. Winding resistance value of transformer and rotating machine are directly displayed on 5.7” TFT display. TRM 50 is designed to work in live EHV switchyard conditions, ensuring operator’s safety and repeatability of results. Maintenance time saving is ensured by one time connection to transformer with simultaneous resistance measurement of three / six windings, measurement of resistances of all taps with automated tap change and demagnetization facility. The meter is protected against the back-EMF offered by large inductive windings.