Product

Standard Normally Open

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Is an optically coupled element that combines a GaAs infrared LED on the input side with anormally-open MOS FET on the output side to realize an excellent cost performance.The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals.

Product

Frequency and Phase Agile 120 MHz Signal Generator.

DDS8p

-

Novatech Instruments , Inc.

DDS8p - Novatech Instruments , Inc.

The DDS8p generates cosine, sine and ACMOS/TTL output signals. The frequency is programmable in 1µHz steps from 100Hz to 120MHz. The phase is 14-bit programmable. The DDS8p is controlled by a binary parallel interface that allows frequency and phase changes as fast as 600 nanoseconds. It is accurate to 1ppm and requires 5 VDC power.

Product

Digital/Analog Frequency Response Analyzer

8800 Series

-

Venable Instruments

8800 Series - Venable Instruments

The analyzer utilizes a digital “Sync” signal to provide synchronization between analog and digital hardware.  The Model 8800 performs simultaneous analysis on both analog input channels and  digital target processor, reliably capturing all data.  Versatile by design,  the Model 8800 digital interface can be disabled, via software, to use the analyzer in a standard 2-channel, analog-only configuration.

Product

Frequency Multipliers for Radio Amateurs

-

Kuhne electronic GmbH

Kuhne electronic GmbH

First approach is to generate the high frequency directly, at the fundamental, using an oscillatortuned on the desired frequency. Few sensitive issues appears here due to high working frequency as, stability, jitter, phase noise, pulling, pushing, low output power, and cost of the active component to meet the performances

Product

Standard Voltage 9 Pin D-Type Connector Blocks for Pickering Products

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector blocks below are suitable to use with Pickering cards and modules that utilize a standard voltage 9-pin D-type connector.

Product

1.3GHz Frequency Counter

Model 1122 / 1122X

-

Aplab Limited

Model 1122 / 1122X - Aplab Limited

- Wide Frequency Range 0.2Hz to 1.3GHz- 2 Separate Channels, for LOW & HIGH Frequencies- High Sensitivity- 8 Digit Green LED Display- Microcontroller based Advance Technology- Optional RS232 Interface- Reciprocal Counting Technique for High Resolution at Low Frequency- Period Measurement- Low Pass Filter for Noisy Low Frequency (<100KHz)- 4 Selectable Gates (10ms, 100ms, 1sec, 10sec)

Product

Absolute > Standard Encoders - Hollow Shaft

-

SCANCON

SCANCON

Absolute > Standard Encoders - Hollow Shaft

Product

Standard Resistivity Kits

-

Prostat Corporation

Prostat Corporation

Your product description goes here.

Product

Standard Voltage 50 Pin D-Type Cables - Connector to Unterminated for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector to unterminated cable assemblies below are suitable to use with Pickering cards and modules that utilize a standard voltage 50-pin D-type connector.

Product

Time & Frequency System

TM-4M

-

Spectrum Instruments, Inc.

TM-4M - Spectrum Instruments, Inc.

The TM-4M Time & Frequency System features a larger, easier to use form-factor. It was designed for mobile applications that require uninterruptible power, and for applications that require multiple front panel connections. The six BNC jacks on the front panel are user-assignable to output any signal the user chooses.

Product

Frequency Reference Sources

-

Holding Informtest

Holding Informtest

Holding Informtest Frequency Reference Sources

Product

Audio Frequency System

Locator Set / UL 30

-

BAUR

Locator Set / UL 30 - BAUR

Cable fault location with the BAUR Locator Set / UL 30. The audio frequency system Locator Set is used to exactly determine the alignment of cables and metal gas or water pipes. With various accessories, this system becomes a universal, indispensable device for power companies, industries, installation companies and water suppliers.* Output energy up to 50 VA* Automatic or manual impedance adjustment* Charging unit and rechargeable battery integrated; battery or mains operation* Continuous or cyclical output

Product

Standard Mechanical Calibration Kit, DC To 9 GHz, Type-N, 50 Ohm

85032F

-

Keysight Technologies

85032F - Keysight Technologies

The Keysight 85032F calibration kit contains precision 50 ohm type-N standards used to calibrate Keysight network analyzers. Standards include fixed terminations, open circuits, and short circuits in both genders. This kit is specified from dc to 9 GHz.

Product

Frequency Generation

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

Macom Frequency Generators

Product

Frequency Dividers

-

Avtech Electrosystems, Ltd.

Avtech Electrosystems, Ltd.

These instruments feature a simple front-panel interface and provide low-jitter frequency division. A reset input (and manual switch) provides a method of synchronizing a high-speed input pulse train with lower-speed devices on the output.

Product

ANSI Standard Burden Sets

Voltage and Current

-

TESCO

Voltage and Current - TESCO

Testing and calibrating instrument transformers often requires standard burdens of reliable accuracy and stability, and burdens that are immune to stray fields and harmonics. The burden sets described below have been carefully designed to meet these requirements.

Product

Time Frequency Analysis Function

OS-0527

-

Ono Sokki

OS-0527 - Ono Sokki

This function can evaluate transient phenomena that were difficult to capture by FFT analysis, and display clearly time change of the frequency component while maintaining its frequency resolution . The OS-0527 is equipped with STFT (Short Time Fourier Transform) and Wavelet transform.

Product

Open Standard Module (OSM)

ROM-2620

-

Advantech Co. Ltd.

ROM-2620 - Advantech Co. Ltd.

Advantech ROM-2620 OSM 1.1 Computer-on-Module is powered by NXP i.MX 8ULP SoC which includes up to 2 Arm Cortex-A35 cores in combination with one Cortex-M33 real timeprocessor and Vivante GC7000 nanoULTRA/GC328 graphics engine. It provides USB2.0, Fast Ethernet, MIPI-CSI, I2C, SPI, GPIO, PWM and MIPI DSI display for embedded applications

Product

Standard Slide Rail Size 3

65-051

-

ELMA Electronic, Inc.

65-051 - ELMA Electronic, Inc.

Automatic release in extended position. The chassis/cabinet mounted slide rails are ultra rugged and hold significantly more weight and can withstand shock and vibration in harsh environments.