Product

CMK Mechanical Kits

-

Columbia Elektronik AB

Columbia Elektronik AB

Columbia has created a unique mechanical click system using ball bearings and guiding sleeves. The UUT is connected to the spring contact pins that are connected to the testing environment in a completely linear fashion. Connecting the UUT to probes can be approached both from the top and the bottom and, optionally, even from the side. The ergonomic housing provides generous space for additional measuring electronics. The back and bottom of the housing can be adapted to the various test system interfaces.

Product

Magnetic Permeability Meter Ferromaster

-

Stefan Mayer Instruments

Stefan Mayer Instruments

Instrument for easy measurement of the relative magnetic permeability µr of feebly magnetic materials and workpieces with a permeability between 1.001 and 1.999. The permeability is measured by touching the workpiece with the probe tip and reading the result from the display. Typical applications are: non-destructive testing of materials, e. g. quality control of stainless steel, material selection for electron-/ion-beam equipment, detection of material defects induced by mechanical or thermal stress.

Product

Network Toner & Probe Kit

MT-7028

-

Prokit's Industries Co., Ltd.

MT-7028 - Prokit's Industries Co., Ltd.

The MT-7028 lets you easily locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45 Lan cable Cat 55e67 (UTP/STP)RJ11/12 Telephone cable Cat. 3 (2/4/6 pin) & normal solid/Stranded wire by alligator clips patch cord. Ideal for all installation and maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling, etc.

Product

Compressed Air Temperature and Humidity Regulator

H3021P-2

-

COMET SYSTEM, s.r.o.

H3021P-2 - COMET SYSTEM, s.r.o.

Humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

Calibration Baths

-

Mensor Corp.

Mensor Corp.

Calibration baths are electronic controllers which automatically, quickly and with the help of a liquid, supply a temperature. Due to the high reliability and exceptional homogeneity in the measuring chamber, calibration baths are particularly suitable as a factory/working standard for the automatic testing and/or calibration of the widest range of temperature probes - independent of diameter. A special micro calibration bath design enables on-site applications.

Product

Current Probe For Multimeters

CP 1000

-

GMC-I-PROSyS

CP 1000 - GMC-I-PROSyS

The CP 1000 current probe has been designed for use with multimeteres respectively for accurate, non-intrusive measurement of AC, DC and complex waveform currents.

Product

Probe Bent Sharp Tip

PACC-PT005

-

Teledyne LeCroy

PACC-PT005 - Teledyne LeCroy

Probe Bent Sharp Tip

Product

Atlas ESR PLUS - Equivalent Series Resistance Meter

ESR70

-

Peak Electronic Design Ltd.

ESR70 - Peak Electronic Design Ltd.

The Atlas ESR provides instant measurement of a capacitor's ESR and it's capacitance value. Using the supplied gold plated probes (removable), the Atlas ESR can measure ESR down to a resolution of 0.01 ohms, up to 40 ohms. It can even measure ESR for capacitors that are in-circuit. Measurements are made at the industry standard frequency of 100kHz. Probes are now removable, allowing 2mm compatible probes to be fitted. Audible alerts are produced for various ESR levels allowing you to perform many tests in succession without having to look at the display.

Product

High Measuring Tools

-

Mitutoyo Corporation

Mitutoyo Corporation

High-efficiency height measurement with the optional dedicated probe

Product

OEM Raman Miniature Probes

-

HORIBA, Ltd.

HORIBA, Ltd.

- Minimum Range: 210cm-1, up to 4000 cm-1 however limited by spectrometer range- Optical design: Bandpass and longpass filters in proprietary layout- Fiber coupling: FC connectors- Fibers: Typically 100µm single fiber for Laser Excitation, TBD for Signal Collection- Spot Size: 100-125µm on sample (**Other spot sizes on request)- Working Distance: 9 to 10mm- Dimensions: 106 x 21 x 33mm / 4.2 x 0.9 x 1.3mm

Product

AMP HOUND 2

AMP2

-

Matco Tools

AMP2 - Matco Tools

*Attach adapter to fuse or touch probes to top of the fuse to measure automotive amperage instantly without removing the fuse*Audible tone lets you know when you have connection with a fuse and if there is current present in the circuit; perfect for working on under-the-dash fuse boxes*Snapshot Mode and Tracking Mode allow easy component testing and parasitic drain location

Product

30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse

CP030

-

Teledyne LeCroy

CP030 - Teledyne LeCroy

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

Product

Mini-Link™ Miniature Jumper

Series ML-100

-

Aries

Series ML-100 - Aries

Mini-Link Miniature Jumpers. Used to jumper from row-to-row or from pin-to-pin. Their miniature size makes it possible to stack one on top of the other. A convenient test probe slot is provided as well. Mini-Links are available from the factory with or without a handle, used for ease of inserting or extracting.

Product

Broadband Current Probes

-

A.H. Systems, Inc.

A.H. Systems, Inc.

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes. The BCP-5xx EMC Current Probes are designed to permit field intensity meters, spectrum analyzers, and other 50W impedance instruments to measure quantitative magnitudes of current.

Product

Geomagnetometer w/Hall Probe

IDR-321

-

Integrity Design and Reseach Corp.

IDR-321 - Integrity Design and Reseach Corp.

Typical applications: Earth's field vector measurement, air shipment inspection, mapping & recording field perturbations, etc.

Product

Autosamplers for Chromatography

-

Teledyne LABS

Teledyne LABS

Maximize the throughput and flexibility of your ACCQPrep system by adding automated sample loading for longer unattended operation.The two rack AS 2x2 and four rack AS 4x2 sampler options allow different chromatographic conditions to be applied to a variety of different samples and doubles or triples the fraction collection capabilities of the base system.The ACCQPrep AutoSamplers provide high recovery of samples with 99.9% transfer of analyte. PeakTrak software allows users to quickly create sample queues for walk up open-access labs and overnight purifications. Develop methods that result in the highest purity and largest loading capacity with the 3 Step Focused Gradient Generator that works seamlessly with the AutoSampler and PeakTrak software. An integrated wash station and sophisticated robotic probe movement ensures sample purity and limits cross contamination.