Vapor
-
product
Vapor Tension Thermometer
RF60A
UEi Test & Measurement Instruments
Farenheit and Celsius scale Vapor Tension thermometer
-
product
Reid Vapor Pressure Analyzers
Increase your gasoline blending profits with process Reid Vapor Pressure measurements and automatic air saturation of the sample.
-
product
Dynamic Vapor Sorption Analyzer
IGAsorp-XT
The IGAsorp-XT is a fully automated water sorption analyzer designed for measurements at temperatures and humidities beyond those available with conventional DVS analyzers. High resolution sorption isotherms are recorded at humidity values from 0.2 %RH or lower, using the unique climate-XT control method. Combined with high temperature water sorption measurements to 300 °C, an integrated pre-heater and completely flexible method programming, the IGAsorp-XT is the world’s most advanced benchtop DVS analyzer.
-
product
Water Vapor Absorption Tester
DRK854A
Shandong Drick Instruments Co., Ltd.
Used to test the water vapor absorption performance of the sample.
-
product
Gas and Vapor Delivery Systems
In thin film deposition, high-quality results start with how process gases are delivered, as they help create the stable environment needed for consistency by controlling flow, pressure and composition to support processes like ALD, CVD, and PVD. Advanced semiconductor devices developed for the most advanced computing processes, such as AI and edge computing, need the ultra-high-purity environments of our gas and vapor deposition delivery systems.
-
product
Water Vapor Permeability Tester
WPT-304
WPT-304 Water Vapor Permeability Tester is manufactured based on the gravimetric method and is applicable to test the water vapor transmission rate of plastic films, composite films, sheets, and other materials used in packaging, medical and constructive industry.
-
product
Matrix Vapor Deposition System
iMLayer
The iMLayer matrix vapor deposition system is sample pretreatment (application of matrix) in order to perform MALDI-MS imaging using an analysis system such as the iMScope imaging mass microscope or the MALDI-7090. With the iMLayer, the deposition method has been adopted as a pretreatment method to achieve high spatial resolution. By using this method, fine matrix crystal can be produced. Also, thanks to automated control, the coating thickness is reproducibly controlled as users configure.
-
product
Cold Vapor Atomic Fluorescence (CVAF) Mercury Analyzer
QuickTrace M‑8000
The QuickTrace® M-8000 Cold Vapor Atomic Fluorescence (CVAF) mercury analyzer is ideal for ultra-trace to sub-mg/L mercury quantitation. Due to the high sensitivity of the M-8000, it easily achieves the ultra-trace detection limit of <0.05 ng/L total mercury that is demanded by customers following EPA method 1631. The QuickTrace® M-8000 is also versatile enough to analyze samples >400 µg/L without dilution in a research or industrial setting.
-
product
Water Vapor Sorption Analyzer
DVS Adventure
DVS Adventure is a water vapor sorption analyzer that measures sorption and desorption isotherms over a broad range of humidities and temperatures. It offers unprecedented temperature stability and humidity performance.
-
product
Physical Vapor Deposition Systems
Physical Vapor Deposition (PVD) systems use physical processes, like sputtering and evaporation, to deposit thin films with exceptional purity and control. These techniques are widely used in semiconductor manufacturing, optical coatings and protective applications.
-
product
Water Vapor Transmission Rate Tester (infrared method)
DRK311
Shandong Drick Instruments Co., Ltd.
DRK311 water vapor transmission rate tester (infrared method), the instrument is suitable for the determination of water vapor transmission rate of plastic films, composite films and other films and sheet materials. Through the measurement of water vapor transmission rate, the technical indicators of control and adjustment of packaging materials and other products can be achieved to meet the different needs of product applications.
-
product
Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer
QuickTrace M‑7600
The QuickTrace® M-7600 Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer easily achieves the ultra-trace mercury detection limit of <0.5 ng/L. The QuickTrace® M-7600 is ideal for ultra-trace to sub-mg/L mercury quantitation. The M-7600 is designed for routine and research use in a variety of settings, including environmental laboratories, industry, and research institutes, for virtually any aqueous acidified sample.
-
product
Vapor Sorption Analysis
Vapor Sorption Analysis is a technique in which a sample is subjected to varying conditions of humidity and temperature, and the response of the sample is measured gravimetrically. Understanding the effects of water content on structure and properties is critical in the development, processing and end use of a broad spectrum of materials. TA Instruments offers the most sensitive, versatile, and productive moisture sorption analyzers on the market. The Discovery SA combines a high-sensitivity thermobalance, innovative humidity control chamber, and reliable autosampler. Innovative technology combined with our unparalleled reputation for service and support make TA Instruments the clear choice of scientists worldwide for vapor sorption studies.
-
product
Explosion-Proof Heaters
Explosion-Proof Heaters (ATEX certified) provide neutral convection solutions of heating for electrical equipments in hazardous industrial locations where potential for explosion exists due to the presence of flammable gases, vapors, powder-metals or dusts.
-
product
Gravimetric Sorption Analyzer
DVS Endeavour
A key feature of DVS Endeavour is the ability to precisely control and measure temperature and relative humidity while simultaneously recording the highest resolution changes in mass on up to 5 samples. Additionally Organic vapor partial pressures can now be directly measured using Surface Measurement Systems’ Speed of Sound sensor (patented).
-
product
High Temperature Absolute Pressure Transducers
Our high temperature Baratron® capacitance manometers are controlled to temperatures of 150°C or higher for use use in demanding semiconductor manufacturing vacuum processes such as metal etching and nitride film chemical vapor deposition (CVD).
-
product
Dew Point
At any temperature there is a maximum amount of water vapor that the air can hold.The dew point is the temperature at which the air must be cooled.Air compression increases the water vapor pressure and thus the dew point.If the air temperature is reduced, the water vapor in the air will begin to condense at a certain temperature. This temperature is called the dew point temperature
-
product
Gas Filter Correlation CO2 Analyzer
Model N360
Teledyne Advanced Pollution Instrumentation
The Model N360 measures carbon dioxide (CO2) by comparing infrared energy absorbed by a sample to that absorbed by a reference according to the Beer-Lambert law.The N360 uses Gas Filter Correlation (GFC) to overcome the interfering effects of various other gases (such as water vapor) that also absorb IR. The analyzer passes the IR beam through a spinning wheel made up of two separate chambers: one containing a high concentration of CO2 known as the reference, and the other containing a neutral gas known as the measure. The concentration of CO2 in the sample chamber is computed by taking the ratio of the instantaneous measure and reference values and then compensating the ratio for sample temperature and pressure. A nitrogen purge system is provided for the GFC wheel assembly to eliminate the effects of ambient CO2, if necessary.
-
product
EpiStride SiC CVD System
Veeco’s latest technology for the compound semiconductor market enables high-performance chemical vapor deposition of Silicon Carbide for both 6 and 8-inch wafer production. The platform enables a return to production in under 5 hours after routine cleaning maintenance. The EpiStride system’s high uptimes, short cycle times and overall stable performance lead to the lowest cost of ownership per wafer compared to competitive systems.
-
product
Dynamic Ultra Micro Hardness Tester
DUH-210/DUH-210S
A new evaluation system for measuring the material strength of micro regions, such as semiconductors, LSI, ceramics, hard disks, vapor deposited films, and thin coating layers, not addressed by previous hardness testers. It can also be used to evaluate the hardness of plastics and rubbers. This instrument uniquely measures dynamic indentation depth, not the indentation after the test. This in turn permits measurement of very thin films and surface (treatment) layers that are impossible to measure with conventional methods. Additionally, this same method supplies the data needed to calculate elastic modulus on the test specimens.
-
product
Selenium Valved Cracker
This source has multiple heating zones that can either generate cracked or uncracked selenium flux while resisting the chemical attack from the corrosive vapor. The unrivaled convenience and flux control are maintained without depleting the source material via an all-metal needle valve. Excellent results have been reported producing blue/green LED and laser diode devices.
-
product
Vapour Permeability Measurement System
Mass Spectrometer vapour permeability measurement system which works across every gas or group of gasses used in modern engineering. This is important as vapour permeability issues effect many performance and safety critical aspects across the engineering industries.
-
product
Large Flow Liquid Source Vaporization Control System
LE Series
A high-flow, high-efficiency, liquid vaporizer with flow channels and heater elements embedded in a cast aluminium block which ensures maximum heat transfer, and the elimination of both cold spots and the risk of condensation. This Liquid Source Vaporization Control System can operate at up to 300 °C and can vaporize up to 30g/min of IPA (or equivalent).
-
product
Greenhouse Gas Analyzer
GASERA ONE GHG
Many chemical compounds are present in Earth’s atmosphere and are capable of acting as greenhouse gases capable of absorbing and emitting infrared radiation emitted by Earth. Many of the gases such as carbon dioxide, methane, nitrous oxide and water vapor among others, occur naturally in the atmosphere and also have anthropogenic (man-made) sources. Methane (CH4) is the second most important greenhouse gas in terms of concentration and impact on the climate.
-
product
Ozone Gas Delivery Systems
MKS ozone gas delivery systems provide field-proven, high concentration, ultra-clean ozone generation for advanced thin film applications such as Atomic Layer Deposition (ALD), Chemical Vapor Deposition (CVD), Tetraethyl Orthosilicate (TEOS)/Ozone CVD (HDSACVD), contaminant removal and oxide growth. Gas delivery models have integrated ozone concentration monitoring, flow control, and power distribution. Additional system options include safety monitoring, status indicators and ozone destruction capability.
-
product
Moisture Resistance/ Humidity Test
This test is performed for evaluating the resistance of component parts and constituent materials to the deteriorative effects of the high-humidity and heat conditions typical of tropical environments. Most tropical degradation results directly or indirectly from absorption of moisture vapor, and from surface wetting. These phenomena produce many types of deterioration, including corrosion of metals; physical distortion and decomposition of organic materials; leaching out of constituent components of materials, and detrimental changes in electrical properties.
-
product
Probes & OEM Modules
Measure and monitor humidity, dew point, carbon dioxide, moisture in oil, temperature, pressure, and vaporized hydrogen peroxide.
-
product
Microelectro Mechanical Systems And MEMS Sensors
NevadaNano has spent a decade integrating multiple, complementary chemical sensors on a single silicon chip. We call it the Molecular Property Spectrometer™ (MPS™). The MPS Gas Sensor works together to measure a variety of thermodynamic and electrostatic molecular properties of sampled vapors, liquids, and particles. In less than a second, the chip creates a large, rich dataset of chemical information. Then, Custom MPS software identifies the types of molecules present in an unknown sample.
-
product
Ultrasonic Metal Welding
Ultrasonic metal welding method is used to join dissimilar metals of aluminum wire and copper for aluminum harnesses, thin copper alloys for vapor chambers and hoop materials, and aluminum laminated foil for rechargeable batteries.
-
product
Water Vapor Transmission Rate Tester
(Electrolysis Method)
Shandong Drick Instruments Co., Ltd.
DRK311 water vapor transmission rate tester (electrolytic method), the instrument is suitable for the determination of water vapor transmission rate of plastic films, composite films and other films and sheet materials. Through the measurement of water vapor transmission rate, the technical indicators of control and adjustment of packaging materials and other products can be achieved to meet the different needs of product applications.
