Dual-Channel, Tri-port per channel, for extended cabling up to 4.5 meters

FW2 - North Atlantic Industries (NAI)

The FW2 provides IEEE 1394 (Firewire) high-speed serial communications. The module is provided with a direct PCIe interface to the local (on-board) processor, or, an external host processor for board platforms that support external PCIe connectivity. These module(s) are not supported with the classic memory register-based NAIBrd Software Support Kit (SSK) API libraries. These communication function modules support device control and management via standard native OS (Linux) FireWire device driver.

Product Home Contact/Sales Drawing Company Catalog Share Add To List

Function Modules

North Atlantic Industries

NAI offers over 70 smart, field-proven function modules covering a wide variety of I/O, Measurement and Simulation, Communications, Ethernet switch and SBC functions. With Off-the-shelf development and quick integration speed, NAI's function modules provide the ability to reconfigure and respond to changing design specifications reducing NRE charges and offering obsolescence protection all with unmatched flexibility with countless hardware & software combinations. Each smart function module has dedicated FPGAs on-board with memory map-based configurability, programmable PID loop support and health monitoring via Built-In-Test. A single API provides programmability across all leading to a more I/O-intensive, distributed, smart and total cost-effective mission system.

Product Home Contact/Sales Company Catalog Share Add To List
4 High-Voltage/High-Current (External VCC) D/A Outputs

DA5 - North Atlantic Industries

Digital-to-Analog (D/A) module DA5 provides 4 independent D/A output channels (half-bridge) utilizing a single external supplied power source with full-scale operating range of 0-65 VDC (V-control mode) and 0-2 A (I-control mode). Alternatively, two channels can be paired (full-bridge) to achieve a full-scale operating range of ±65 V and ±2 A from a single external supplied power source. Linearity/accuracy is ±1% FS range over temperature. The DA5 provides either voltage or current control loop modes, which are programmable for the application.

Product Home Contact/Sales Company Catalog Share Add To List
12 D/A Outputs (±10 VDC or ±25 mA)

DA1 - North Atlantic Industries

The DA1 module features 12 independent D/A output channels with a full-scale range of ±10 VDC at ± 25 mA (max). The DA1 provides either voltage or current control loop modes that are programmable for the particular application. The DA1 module also offers external trigger/synchronization signal (RS422/485) capability, which provides/accepts a trigger signal to/from other module(s).

Product Home Contact/Sales Drawing Company Catalog Share Add To List
16 D/A Outputs (+10 VDC or +10 mA)

DA2 - North Atlantic Industries

The DA2 module features 16 D/A output channels with a full scale range of ±10 VDC at ±10 mA (max). The DA2 module also offers external trigger/synchronization signal (RS422/485) capability, which provides/accepts a trigger signal to/from other module(s).

Product Home Contact/Sales Drawing Company Catalog Share Add To List
4 (High Current) D/A Outputs (±40 VDC or +100 mA)

DA3 - North Atlantic Industries

The DA3 module features 4 high-current D/A output channels with a full-scale range of ±40 VDC or ±100 mA (max). The DA3 provides either voltage or current control loop modes that are programmable for the particular application.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
4 (High Voltage) D/A Outputs (+20 VDC to +80 VDC)

DA4 - North Atlantic Industries

The DA4 module features 4 high-voltage D/A output channels with a maximum full-scale range of ±80 VDC at ±10 mA (max).

Product Home Contact/Sales Drawing Company Catalog Share Add To List
6 Chip Detection and Burn Channels

CD1 - North Atlantic Industries

The CD1 provides 6 Chip Detect and Fuzz Burn interface(s). A Chip Detector (CD) is a magnetic-electrical device that provides a reliable method of detecting impending failure of bearings and gears.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
Managed Ethernet Switch with L2/L3 Layer Support and Fiber Optic Option

ES2 - North Atlantic Industries

Ethernet Switch module, ES2 provides up to 16 10/100/1000 Base-T 1 Gb ethernet ports. Additionally, there is one 10/100/1000 Base-T maintenance port interface, one RS-232 maintenance/console port interface, and a Fiber-Optic channel with four 10 Gb ports. It also provides numerous L2 and L3 networking, quality of service (QoS) and security features available as described below.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
4 Serial Communication Channels, Multi-Mode Programmable, Isolated

SC2 - North Atlantic Industries

Module SC2 supports intelligent, full duplex, independent, multi-channels that can be individually software-configured for either RS-232C, RS-422, RS-485, RS-423 (w/data and/or clk bit inversion for MIL-STD-188C unbalanced interface support), or synchronous or asynchronous communications.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
8 Serial Communication Channels, Programmable RS-232/422/485 Non-Isolated

SC3 - North Atlantic Industries

Serial Communication Module SC3 provides up to 8 high-speed, programmable RS-232, RS-422, RS-485, non-isolated communication channels. Each channel is programmable for either Serial Communications (SC) protocol or General Purpose I/O (GPIO) modes as either RS-422/485 (differential) or RS-232 (single ended) hardware level interfaces.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
4 Serial Communication Channels, Multi-Mode Programmable, Non-Isolated

SC7 - North Atlantic Industries

Module SC7 supports intelligent, full duplex, independent, multi-channels that can be individually software-configured for either RS-232C, RS-422, RS-485, RS-423 (w/data and/or clk bit inversion for MIL-STD-188C unbalanced interface support), or synchronous or asynchronous communications. SC7 is the same as SC1 except SC7 reallocates the pins used for CTS Flow Control as four (4) additional system grounds.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
4 Channels, Strain Gauge Measurement

SG1 - North Atlantic Industries

Module SG1 is NAI’s latest generation Strain Gage Measurement Module. This intelligent, four-channel module is used on our Multifunction Embedded I/O Boards and Single Board Computers (SBCs).

Product Home Contact/Sales Drawing Company Catalog Share Add To List
Time-Triggered Ethernet / ARINC 664 Part 7 (AFDX®) / IEEE 802.3 Ethernet Deterministic Communications

TE2 - North Atlantic Industries

Module TE2 is one of NAI's latest generation of advanced function Configurable Open Systems Architecture™ (COSA®) compatible modules. The TE2 is a certifiable, single-port, tri-redundant, deterministic Ethernet communications interface module that supports TTTech’s certifiable TTEthernet® End System product consisting of three traffic classes: SAE AS6802 (Time-Triggered Ethernet), ARINC 664 Part 7 (Avionics Full-Duplex Switched Ethernet (AFDX®), and/or IEEE 802.3 best-effort protocol. By supporting all three traffic classes, NAI's TE2 is the ideal solution for current users of IEEE 802.3 Ethernet, who plan to upgrade to Deterministic Ethernet (ARINC 664 Part 7 (AFDX®) or Time-Triggered Ethernet SAE AS6802) protocols in the future at any time without changing hardware.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
8 Channels, Differential Input

VR1 - North Atlantic Industries

The VR1 provides eight isolated, wide voltage input range Variable Reluctance (VR) signal or general-purpose Pulse Counter measurement interfaces. Channels can be programmed to operate individually or combined in pairs.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
2 Channels, 2-28 Vrms, 47 Hz-20 kHz (max. range), programmable

AC2 - North Atlantic Industries

The module is used to provide an AC signal source when a secondary reference source other than the optional on-board reference module is required. The modules are programmable for full range voltage outputs from 2 to 115 VAC, and frequency from 47 Hz to 10 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
2 Channels, 28-115 Vrms, 47 Hz-2.5 kHz (max. range) programmable

AC3 - North Atlantic Industries

The module is used to provide an AC signal source when a secondary reference source other than the optional on-board reference module is required. The modules are programmable for full range voltage outputs from 2 to 115 VAC, and frequency from 47 Hz to 10 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
12 A/D Channels (±1.25 to ±10.0 VDC FSR); 24-bit Sigma-Delta

AD1 - North Atlantic Industries

Module AD1 features 12 channels with up to 24-bit Sigma-Delta A/D converters for each individual channel. The maximum programmable, expected full-scale range input for the AD1 module is ±1.25 to ±10 VDC and ±12.5 to ±100 VDC respectively. The A/D converters have programmable sample rates of up to 256 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
12 A/D Channels (±100V max); 24-bit Sigma-Delta

AD2 - North Atlantic Industries

Module AD2 features 12 channels with up to 24-bit Sigma-Delta A/D converters for each individual channel. The maximum programmable, expected full-scale range input for the AD2 module is ±100.0 to ±12.5 VDC respectively. The A/D converters have programmable sample rates of up to 256 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
12 A/D Channels (±25mA FSR); 24-bit Sigma-Delta

AD3 - North Atlantic Industries

Module AD3 features 12 channels with up to 24-bit Sigma-Delta A/D converters for each individual channel. The maximum programmable, expected full-scale range input for the AD3 module is ±25 mA respectively. The A/D converters have programmable sample rates of up to 256 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
16 A/D Channels (±1.25 to ±10.0 VDC FSR or ±25 mA) ; 16-bit SAR, 8 Chx2 A/D multiplexed

AD4 - North Atlantic Industries

Module AD4 features 16 channels with up to 16-bit SAR A/D converters for one per 8 channel multiplexed bank / 2 banks. The maximum programmable, expected full-scale range input for the AD4 module is ±10.00, ±5.00, ±2.50 or 1.25 volts where range is -FS to +FS, 0 to FS VDC, or ±25 mA. The A/D converters have programmable sample rates of up to 500 kHz / Aggregate per bank of 8 Channels.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
16 A/D Channels (±6.25 to ±50.0 VDC FS); 16-bit SAR, 8 Chx2 A/D multiplexed

AD5 - North Atlantic Industries

Module AD5 features 16 channels with up to 16-bit SAR A/D converters for one per 8 channel multiplexed bank / 2 banks. The maximum programmable, expected full-scale range input for the AD5 module is 50.00, 25.00, 12.50 or 6.25 volts, where range is -FS to +FS or 0 to FS VDC respectively. The A/D converters have programmable sample rates of up to 500 kHz / Aggregate per bank of 8 Channels.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
16 A/D Channels (12.5 to 100.0 VDC FS); 16-bit SAR, 8 Chx2 A/D multiplexed

AD6 - North Atlantic Industries

Module AD6 features 16 channels with up to 16-bit SAR A/D converters one per 8 channel multiplexed bank / 2 banks. The maximum programmable, expected full-scale range input for the AD6 module is 100.00, 50.00, 25.00 or 12.50 volts where range is -FS to +FS or 0 to FS VDC respectively. The A/D converters have programmable sample rates of up to 500 kHz / Aggregate per bank of 8 Channels.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
16 A/D Channels (±10 VDC); 16-bit SAR per channel

ADE - North Atlantic Industries

Module ADE features 16 channels with up to 16-bit SAR A/D converters, simultaneous sampling. The maximum programmable, expected full-scale range input for the ADE module is -FS to +FS or 0 to FS; 10.00, 5.00, 2.50, 1.25 or 0.625 volts respectively. The A/D converters have programmable sample rates of up to 200 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List
16 A/D Channels (±100 VDC); 16-bit SAR per channel

ADF - North Atlantic Industries

Module ADF features 16 channels with up to 16-bit SAR A/D converters, simultaneous sampling. The maximum programmable, expected full-scale range input for the ADF module is -FS to +FS or 0 to FS; 100.00, 50.00, 25.0, 12.5 or 6.25 volts. The A/D converters have programmable sample rates of up to 200 kHz.

Product Home Contact/Sales Drawing Company Catalog Share Add To List