Teledyne LABS

​Teledyne LABS is a collection of decades-old Teledyne brands contributing to the research, development and manufacturing of laboratory instruments and technologies used around the globe. You’re sure to recognize some or all of the entities comprising Teledyne LABS. After all, we’re Everywhereyoulook™:


  • ,
    United States

Filter Results By:

Products

Applications

Showing results: 1 - 15 of 87 items found.

  • Chromatography Columns - Silica

    RediSep Silver - Teledyne LABS

    Teledyne LABS reliable RediSep® preparative chromatography products are designed to consistently produce high purity compounds. RediSep columns are precision-packed for high resolution and reproducibility. They feature a one-piece design with no cumbersome or expensive adapters, valves, barrels, or other accessories. Luer end fittings provide quick, easy connection to CombiFlash systems and other instrument systems and manual setups. You’ll enjoy fast, easy purification and scale-up from milligrams to tens of grams. RediSep columns are not HPLC columns​, rather they are designed for high capacity purification.

  • Mercury Analyzers

    QuickTrace Series - Teledyne LABS

    When the concentration of mercury needs to be measured, laboratories around the world turn to Teledyne LABS’ for high-performance solutions to their mercury analysis challenges. Our versatile analyzers are designed for research and routine use for virtually any aqueous acidified sample in a variety of settings, including environmental laboratories, industry, and research institutes.

  • Supercritical Fluid Chromatography System

    ACCQPrep SFC - Teledyne LABS

    The ACCQPrep®​ SFC is a compact system that simplifies method complexity and ensures successful separations for users of all experience levels. As the only system to enable both bulk collection from stacked injections, and multi-sample, open-access with an optional SFC AutoSampler (2x2 or 4x2), the ACCQPrep SFC offers versatility without limitations; all in the smallest Prep SFC footprint on the market.

  • Chromatography Columns - Alumina

    RediSep Alumina - Teledyne LABS

    Single use alumina columns run under normal phase conditions and offer different selectivity to silica. Neutral alumina columns are useful when samples are acid sensitive and prone to degradation on normal phase silica gel.Choose basic alumina to purify basic compounds without basic modifiers such as TEA or ammonium hydroxide. This avoids solvent swapping, washing the chromatography system, or contaminating subsequent runs.

  • Flash Chromatography System for Normal & Reverse Phase Purifications at Flow Rates up to 100 mL/min and Pressures up to 150 psi (10 bar)

    CombiFlash NextGen 100 - Teledyne LABS

    The CombiFlash® NextGen 100 offers flow rates up to 100 mL/min at operating pressures up to 150 psi (10 bar). This is an economical system is designed to perform both normal and reverse phase purifications.

  • Purge & Trap Concentrator

    Lumin - Teledyne LABS

    In 1974, Tekmar revolutionized the way laboratories performed volatile organic compounds testing. Since then, Tekmar has continued to build on the foundation of the initial Purge and Trap technique for volatile organic compounds, one innovative layer at a time. The Lumin builds on seven previous generations, making Tekmar the industry’s cornerstone of the Purge and Trap process and support.

  • GC Sample Prep & Sample Introduction

    Teledyne LABS

    For Gas Chromatography Preparation & Introduction, Teledyne LABS’ brand offers Purge & Trap instruments to prepare samples for separation. P&T is routinely applied to detect volatile organic compounds (VOCs) down to sub-ppb levels in soil and water, and as a step in determining outdoor and indoor air quality. The arrival of microprocessor-driven systems allows the concentrator to be more precise and automated, giving the operator more time for other projects. All Teledyne LABS P&T instruments satisfy U.S. Environmental Protection Agency method guidelines.

  • TOC Combustion Analyzer

    Torch - Teledyne LABS

    The Torch is considered the premium TOC combustion analyzer due to its many useful features and automated analysis processes. For example, it makes serial dilutions of stock standards to form a calibration curve and auto-dilute samples with concentrations above the calibration curve. The Torch software has built-in diagnostic and troubleshooting capabilities​. For a luxury but affordable TOC combustion analyzer that you can just load and walk away, look no further than the Torch. You won't regret it!

  • Automated Routine Analysis of Waters by Purge & Trap Concentration

    AQUATek LVA - Teledyne LABS

    The AQUATek LVA is a full automation solution for routine analysis of waters by purge and trap concentration. It utilizes a fixed volume loop that is filled with liquid sample, internal and/or surrogate standards are added, and then the sample is transferred to the Lumin or Stratum PTC. Upon completion of the purge step by the concentrator, the AQUATek LVA then initiates a clean up cycle where the sample loop and concentrator sparger are cleaned with 90o C water via the two-stage water heater.

  • TOC Combustion Analyzer

    Lotix - Teledyne LABS

    TOC users from around the globe requested an instrument that meets the following criteria: simplicity, performance, and durability.The Lotix TOC Combustion analyzer is designed to accurately measure carbon content in aqueous matrices down to the ppb level. It uses proven high temperature combustion, oxidation of carbon material into carbon dioxide, and detection using a new Non-Dispersive Infrared (NDIR) detector.

  • Total Organic Carbon

    Teledyne LABS

    Teledyne LABS’ brand of Total Organic Carbon (TOC) analyzers provide unparalleled accuracy, precision, throughput and robust construction for water samples varying in quality from semiconductor-grade to municipal wastewater. All our pharmaceutical instruments have available 21 CFR Part 11 software tools for your compliance needs, as well as validation documentation, services and training.

  • Cold Vapor Atomic Fluorescence (CVAF) Mercury Analyzer

    QuickTrace M‑8000 - Teledyne LABS

    The QuickTrace® M-8000 Cold Vapor Atomic Fluorescence (CVAF) mercury analyzer is ideal for ultra-trace to sub-mg/L mercury quantitation. Due to the high sensitivity of the M-8000, it easily achieves the ultra-trace detection limit of <0.05 ng/L total mercury that is demanded by customers following EPA method 1631. The QuickTrace® M-8000 is also versatile enough to analyze samples >400 µg/L without dilution in a research or industrial setting.

  • Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer​

    QuickTrace M‑7600 - Teledyne LABS

    ​The QuickTrace® M-7600 Cold Vapor Atomic Absorption (CVAA) Mercury Analyzer easily achieves the ultra-trace mercury detection limit of <0.5 ng/L​. The QuickTrace® M-7600 is ideal for ultra-trace to sub-mg/L mercury quantitation. The M-7600 is designed​ for routine and research use in a variety of settings, including environmental laboratories, industry, and research institutes, for virtually any aqueous acidified sample.

  • Multi-Matrix Purge and Trap

    Atomx XYZ - Teledyne LABS

    The Atomx XYZ is the second generation combined soil/water autosampler and purge and trap concentrator system in the Tekmar VOC product family. It is the only instrument of its kind to employ a unique automated methanol extraction feature for high level soils in accordance with USEPA Method 5035. Methanol rinsing, dilutions capability and three standard addition vessels all come standard on the Atomx XYZ. While priced competitively, the system offers unique features that cannot be found on any other sample prep system on the market today.​

  • Flash Chromatography System for Flow Rates from 1 to 300 mL/min, Operating Pressures up to 300 psi (20 bar)

    CombiFlash NextGen 300+ - Teledyne LABS

    The CombiFlash® NextGen 300+ features all available performance and safety options. Flow rate range is from 1 to 300 mL/min at operating pressures up to 300 psi (20 bar). The system is fitted with a solid load injection valve that can be bypassed if you decide to perform a liquid injection. RFID technology comes standard and automatically reads the size and type of RediSep or RediSep Gold® column being used for the purification. Based on this information, a default gradient and flow rate are programmed in​to the system. Simply insert the column into the stand, press Play and the run starts. This same RFID technology automatically reads the rack type being used ensuring there is never a missed or overfilled tube. Active solvent and waste level sensing, along with column air purge, is standard is standard on the NextGen 300+.

Get Help