Teledyne LeCroy quantumdata

Leading provider of innovative solutions for testing emerging video technologies.

  • (847) 888-0450
  • (847) 888-2802
  • cevans@quantumdata.com
  • 2111 Big Timber Rd
    Elgin, IL 60123
    United States

Filter Results By:

Products

Applications

Showing recent results 1 - 15 of 29 products found.

  • 804 Video Test Generators

    804 Series - Teledyne LeCroy quantumdata

    The Teledyne LeCroy rack mountable model 804, 804A and 804B Video Generators are optimized for testing modern HDMI flat panel TVs. The 804 video test generator supports testing of HDMI resolutions operating up to 225 MHz. The 804A Video Generator supports testing of HDMI 4K x 2K resolutions up to pixel rates of 300 MHz. The 804B video test generator supports testing of HDMI 4K x 2K resolutions up to pixel rates of 600 MHz.

  • 80Gbps Video Analyzer/Generator for DisplayPort 2.0 Testing

    M42d - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata M42d Video Analyzer/Generator provides functional and will support compliance testing for video, audio and protocol of DisplayPort 2.0 and DisplayPort 1.4. The M42d supports legacy DisplayPort lane rates of 1.62, 2.7, 5.4, 8.1 Gb/s and the new DP 2.0 higher speed lane rates of 10.0, 13.5, & 20.0 Gb/s data rates with the new line coding—128b/132b. The protocol analyzer provides a snap shot status view and deep analysis using captures of incoming DisplayPort 2.0 streams from source devices including DSC/FEC compressed streams. The M42d’s video generator can be used for testing silicon as well as devices such as displays, USB-C adapters, extenders, etc. The video generator offers a large library of standard video timings and test patterns necessary for testing next generation high resolution displays.

  • 880 Video Test Generators and Analyzers

    880 Series - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 880 series video test instruments offer a wide variety of solutions for HDMI 1.3, DVI, DisplayPort 1.1 and analog video. There are several options (models) available depending on the digital interfaces and functions that are required for a particular application. The solutions supported by the 880 series include functional testing in the R&D environment, compliance testing, manufacturing testing for production lines and testing in military applications as well.

  • Adapters

    Teledyne LeCroy quantumdata

    Teledyne LeCroy offers two quantumdata test point adapters as auxiliary devices for testing MHL and HDMI HEAC.

  • Advanced Test Platform

    980 12G - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 980 12G-SDI Video Generator / Analyzer module supports video and audio functional testing of next gen broadcast monitors, conversion devices and sources up to 12G-SDI. The module is equipped with four (4)12G-SDI-capable output ports. The output ports can be aggregated for Dual link HD-SDI and Quad link 3G-SDI operation. A genlock input supporting both SD analog black burst and HD tri-level to sync the output clocks with a "house sync" but the module can also run off its internal clock. The module's four (4) SDI input ports can also be aggregated for Dual link HD-SDI and Quad link 3G-SDI operation. For single link operation only port 1 on the input or output is functional.

  • Advanced Test Platform

    980b - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 980B platform is a modular based system that can accommodate up to three (3) to four (4) 980 series modules depending the modules configured. The 980B platform and its modules can be controlled either through the PC-based 980 GUI Manager or through the embedded 980 GUI Manager running on the 980B platform itself. The 980B Test Platform’s built-in color touch screen provides a graphical user interface (GUI) to control the instrument and to view incoming video and metadata in the Real Time mode when using the 980 modules with analyzer functions.

  • Advanced Test Platforms

    980 Series - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 980 series Advanced Test Platforms are module based systems that can accommodate multiple 980 series modules. There are two (2) 980 platforms available. The 980 series platforms and associated modules can be controlled either through the PC-based 980 GUI Manager or through the embedded 980 GUI Manager running on the 980B or 980R platforms’ built-in color touch screen. The 980 GUI Manager provides a graphical user interface (GUI) to control the instrument and view status. The embedded GUI Manager enables you to view incoming video and metadata in the Real Time mode when using any of the 980 modules with an analyzer function.

  • Analyzer Test Set

    280 Series - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 280 HDMI/HDBaseT Video Generator (Tx) and Analyzer (Rx) is small compact, battery powered test set ideally suited for professional A/V integrators and home theatre installers. This convenient test set enables you to conduct basic verification and diagnostic tests on HDMI/HDBaseT cables, video distribution networks and individual A/V components. The HDMI input and output ports support testing up to 18 Gbps data rate and 600 MHz pixel rate and the HDBaseT input and output ports support testing up to 300 MHz pixel rate. The HDBaseT interface supports transmission in Long Reach mode as well.

  • Generator Module for HDMI 8K Testing

    Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 980 48G Protocol Analyzer / Generator module for HDMI 8K Testing is equipped with both an HDMI Tx/Output port for TMDS and Fixed Rate Link (FRL) video generation and an HDMI Rx/Input port for TMDS and Fixed Rate Link (FRL) video and protocol analysis. The HDMI Tx and Rx ports support testing of formats up to 8K formats at 1485MHz pixel rates. Full compliance test suites are supported in FRL and TMDS modes for both HDMI sources and sinks.

  • Handheld Digital Video Generator and Analyzer

    780C - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 780C is a handheld digital video generator and analyzer that enables you to run tests on various digital video devices and network distribution devices on site or in the R&D lab. The 780C instrument provides a 7 inch color touch screen for operation and for viewing status of outgoing and incoming video and audio. The 780C is equipped with multiple interface types including HDMI, HDBaseT, 3G-SDI and component analog. Testing digital interfaces is supported by both an output port and an input port to allow testing of digital video sources, displays, audio devices and distribution devices. Testing hybrid converter devices supporting 3G-SDI, HDMI, HDBaseT distribution networks is a key application of the 780C as well.

  • Handheld Test Instruments for HDMI

    780 Series - Teledyne LeCroy quantumdata

    The Teledyne LeCroy 780 series handheld test instruments for HDMI® are battery powered (except 780C, 780D and 780E), portable video and audio generators and HDMI analyzers that enable you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780 series instruments are equipped with both a reference source and a reference sink interface allowing you to test audio, video and protocols of any type of digital video device: sources, repeaters and sinks.

  • HBR3 Video Analyzer / Generator for DisplayPort Testing

    M41d - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata M41d HBR3 Video Analyzer/Generator for DisplayPort Testing is a compact versatile test instrument offering entry level functional testing that can be extended through software licenses to a full compliance tester with sophisticated analysis and diagnostic capabilities. The M41d enables design and test engineers to validate their products for interoperability and reliability for the DisplayPort 1.4 video interface. The M41d is a flexible test instrument that can be upgraded from a functional tester for sources and sinks to a sophisticated analyzer and, if desired, can test full standards compliance, enabling developers to pre-test or self-test independently, reducing delays and costs during the product development cycle.

  • HDMI Phy and Protocol Aux Channel Analyzer Module

    Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 980 HDMI Phy & Protocol Aux Channel Analyzer module supports compliance testing of the HDMI DDC bus and HDMI 2.0 CEC testing (partial support only). The module’s CEC compliance tests enable you to identify compliance failures early in the development cycle. The solution is ideal for pre-testing and self-testing (where permitted) your HDMI 2.0 device. The module also supports compliance testing of the HDMI DDC bus voltage and timing parameters in accordance with HDMI 1.4b. Future releases of the module will support functional tests and compliance tests on other HDMI auxiliary channels.

  • Multimedia HDMI Test Instrument

    881E/882E - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 881E/882E-HDMI Video Generator model is packed with features for video and audio testing of HDMI 1.4a sink devices. The HDMI transmitter provides 12-bit/component deep color and HDMI 3D testing features. An analog option with 250 MHz analog output and composite analog for NTSC and PAL testing is available as well with the HDMI transmitter only configuration.

  • Multimedia Test Instrument

    882EA-HDMI - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 882EA-HDMI test instrument provides two (2) HDMI transmit (Output) ports and two (2) HDMI receive (Input) ports for testing both HDMI sources, sinks and repeater devices. The 882EA-HDMI instrument can optionally be equipped with the industry approved HDMI CEC and HDCP compliance test options as well.

Get Help