Test Programs

The AI-80 is a fully programmable stand alone Caller ID signal generator designed for production environments. It is capable of generating signals for all FSK and DTMF based Caller ID standards. Includes general telephone signal analysis features and a highly flexible programming language for sophisticated and complex production testing sequen ...more

The Megohmmeter Model 5070 is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. ...more

Test & Troubleshoot CCTV Cameras. Access Camera Programming Menus with On Screen Display. Supports over a Dozen PTZ Protocols. Porgrammable Position Presets and Touring. Integraged UTP Cable Tester. Full Function Digital Multimeter. Test Pattern Generator for Monitor Setup/Adjustment. ...more

Tests insulation of wires, cables, transformers and electrical motors. Comes as a complete kit including test leads and PC software. Selectable test voltages 250V, 500V and 1000V. Programmable timer to perform the Dielectric Absorption Ratio Test. Sensitive Ohmmeter for checking resistance of motor windings. Built in voltmeter. ...more

Tests insulation of wires, cables, transformers and electrical motors. Comes as a complete kit including test leads and PC software. Selectable test voltages up to 1000V. Programmable timer to perform the Dielectric Absorption Ratio Test. Sensitive Ohmmeter for checking resistance of motor windings. Selectable polarization of ohmmeter for checking ...more

Autoranging insulation measurements to 4000MΩ with 250/500/1000V Test Voltages and 1mA test current. Datalogging function stores up to 16,000 readings with single store or a programmable rate of 1 to 65,000 seconds per sample  ...more

Enables non-contact measurements of ground conductors without need for auxiliary ground spikes. Autoranging ground resistance easurements from 0.025Ω to 1500Ω with 0.002Ω resolution. True RMS AC Leakage current range of 0.2mA to 30A with 1.000mA resolution. Programmable Datalogging with 116 data points. Programmable Hi/Lo Alarm ...more

Ditto Model 4103IN, except: DC Insulation Test Voltages & Gohm Ranges: 1000V/0-60Gohm, 2500V/0-150 Gohm, 5000V/0-300Gohm., 10000V/0-600Gohm. Accuracy: +-3% Features: Auto-Detect from 450Vac prior to testing Iner-Save Program to save Batteries Crowbar/Flash-Test Protection Current Limit/Power Limit Auto-Discharge Detector/Indicator Auto-Off shut dow ...more

Quest offers a comprehensive set of test facilities to help optimize your product's cooling design while minimizing noise. In addition to airflow and audio testing, we offer infrared camera testing and an assortment of temperature/humidity test chambers, all the instrumentation required for thermal measurements, and the engineering staff to design ...more

The NetUSB-1149.1/E (4 TAPs) and NetUSB-1149.1/SE (8 TAPs) are advanced USB 2.0 and LAN-based controllers that can be used in the testing and/or in-system programming (ISP) of devices, boards, or systems compliant with the IEEE-1149.1 standard.  ...more

The CPXI-1149.1/Turbo is an advanced PXI/cPCI-based controller that is used for testing and in-system programming of devices, boards, or systems compliant with the IEEE-1149.1 standard.  ...more

The SAT 9520 satellite finder measures the quality of satellite signals from the antenna dish to the customer's set top IRD. It is compact, field portable and very easy to use, making it the ideal test instrument for the satellite installer. The 9520 is an alternative to expensive, bulky spectrum analyzers. Since it displays actual signal leve ...more

Manual / Automatic Box for Functional / Vision Test. Interchangeable Bed of Nails for PCB / Final Products. Automatic Program Change-Over by Optional Barcode Reader ...more

The CVXI-1149.5 is an intelligent IEEE-std-P1149.5 compliant MTM Bus tester. The standard module contains 4M bytes of memory. The module is an A16/A24/A32, D16, D32 slave with a programmable VXI bus interrupter. The module occupies a single "C" size VXI slot.  ...more

The purpose of Microsoft's Windows Hardware Quality Labs is to certify that a device is compatible with Microsoft operating systems. Companies whose devices pass this series of tests are qualified to display the Microsoft Windows logos and can be listed on Microsoft's Hardware Compatibility List (HCL), www.microsoft.com/hcl/. The products that ...more

Wide Test Current Range: User programmable output current, 3A to 45A AC in 0.01A steps, provides extensive coverage for testing to UL, CSA, VDE, IEC and other agency safety requirements. Programmable Source Voltage: Limit the voltage to the DUT using the programmable source voltage from 1.0V to 8.0V rms and meet the low voltage requirement of ...more

The 3800 Programmer Controller has been designed and refined specifically for environmental test chamber applications. The interactive touch-sensitive keypad and informative four line display with 20 characters per line makes program entry and monitoring easy. ...more

Thermotron's 8800 Programmer Controller is simple to operate. It includes a 12" color flat-panel display (800 x 600 resolution) with touch screen interface which makes operation and data collection more reliable than ever before. This large display allows the user to capture and view more data on one screen than all other controllers. The ...more

The ARC-186 and ARC-222 TPSs were hosted on DME's LabVIEW-based ARSATS benchtop test system. DME provided a complete Software Lab, including the capability to reload the Operational Flight Program into the ARC-222 radio directly from the ARSATS tester, and the ability to program individual devices on the circuit boards for a total organic test ...more

SwifTest-MX is our premier real-time adaptive test solution for mixed-signal devices that has helped save millions of dollars annually for demanding world-class customers like Qualcomm and Texas Instruments. Based on Pintail?s  Real-time Adaptive Control (RTAC) technology, the solution has proven effective in reducing test time on immature or ...more

SEDana is a Fast, Easy, Practical tool for statistical analysis of ATE test data. Salland Engineering developed SEDana based on a long experience and knowledge of test equipment, test program development and statistical analysis of test data. So it’s written from the engineer point of view instead of a ‘’theoretical’’ SW-package. ...more

MODEL TL5 Intelligent Test Load for Batteries and Fuel Cells is a passive electronic load with built-in microprocessor intelligence, with the ability to briefly interrupt the current and take resistance free cell potential readings with programmable delay. There are additional inputs for a reference electrode and for a temperature sensor. ...more

Selection of Handler Interface includes HB-100 providing relay closures or logic level (positive logic) with software programmable End Of Test (EOT) and PI-200 providing positive or negative logic with hardware adjustable End Of Test (EOT) and bin pulse widths. ...more

Mechanical testing has served a multitude of manufacturers and engineers. This facility provides mechanical testing for composite metals, plastics, textiles, rubber and other materials. Industry standard tests as well as customized test programs are provided at Intertek ETL Entela.  ...more

Burn-in Operation Capabilities Verity & Capacity: H.T.O.L (High Temp Operating Life). L.T.O.L (Low Temp Operating life). Early lifetime failure. Customized temp burn-in (- 40C TO +180C). Intelligent life test (test while burn-in) . 22 Burn-in Chambers, with a total of 800 positions. Burn-in test program & 1st article test. Adaptation t ...more