Showing recent results 1 - 15 of 244 products found.
-
BERTA - Opal-RT Technologies Inc.
OPAL-RT’s BERTA test bench is a safe, reliable and portable test bench for speed governors, turbines, voltage regulators (AVR) and power system stabilizers (PSS). Equipped with a high-performance real-time simulator programmed with world-renowned RT-LAB software, the BERTA Test bench enables users to easily and comprehensively test real generating units in the power plant, synchronized and transmitting power to the main grid and/or on real controllers connected to a virtual generating unit in laboratory.
-
TestEdge, Inc.
TestEdge provides customized bench test. If your device has specialized test requirements, it may be necessary to test your device using specialized bench equipment rather than traditional ATE. In other situations, both ATE and a custom bench setup may be required to fully characterize the device and provide necessary correlation. Finally, it may be useful to create a custom bench setup to facilitate device debug.
-
Techimp HQ S.r.L
It is a deeply customizable test bench which is suitable to generate frequency and amplitude controlled voltage. This test bench could be used for life test or quality test on samples or devices. It can be configured both for sinusoidal test (STANDARD version) and both for square wave or pulse test (TechSQUARE). It includes safety systems for avoiding overload and incorrect use.
-
OPAL - HGH USA
OPAL is a multispectral portable bench dedicated to the test and the maintenance of military EO devices.
-
RTB 3000 - Santa Barbara Infrared, Inc.
The RTB 3000 Detector Test Bench from Santa Barbara Infrared (SBIR) is a flexible integrated IR detector test station for evaluation of single element detectors, linear arrays, and focal plane arrays. The RTB 3000 provides the radiometric stimulus necessary to perform accurate IR detector testing in both laboratory and production environments.
-
Ono Sokki
Our automotive measurement system is advancing together with the evaluation of automobile technology. Ono Sokki provides various types of test system to support customer’s evaluations of diversified vehicles including HEV/EV. Also we are extending the range of Realcar-simulation bench which reproduces the actual load using vehicle model.
-
TPS II EURO - Maschinenbau Haldenwang GmbH & Co. KG.
The test lane-compatible TPS II EURO tachometer test stand is ideally suited for evaluating deviations in the speedometer speed of cars and trucks up to 13.0 t. The speedometer test can be carried out with up to ten freely selectable test points. The distance can also be measured with optionally up to ten freely selectable test points. With the hydraulic lifting sill as an extension aid for the drive axle, a trouble-free test sequence is always guaranteed.
-
TPS 25 EURO - Maschinenbau Haldenwang GmbH & Co. KG.
The test lane-compatible TPS 25 EURO is ideal for evaluating deviations in the speedometer speed in two-wheeled vehicles up to 1.5 t. The speedometer test can be carried out with up to ten freely selectable test points. The distance can also be measured with optionally up to ten freely selectable test points.
-
-
VMH Kalibro Ltd
We can automate the pulse reading and counting as well as required parts of the process control in existing benches.
-
NEO TELE-TRONIX PVT. LTD
The testing equipment is extensively used in industries for testing of motors under no load conditions.
-
W2350EP - Keysight Technologies
The W2350EP DDR3 Compliance Test Bench helps solve the problem of simulation-measurement correlation. In the past, the pre-manufacture design could be simulated and tested using compliance tools from an EDA vendor. And the post-manufacture prototype could be bench tested using compliance tools from test and measurement instrument vendors.However, because of subtle differences between the two vendors independent approaches to compliance, it was almost impossible to correlate the two. This opened the possibility of the pre-manufacture design passing and the post-manufacture prototype failing, necessitating a time-consuming and expensive design spin. In contrast, DDR3 Compliance Test Bench leverages the exact same industry-leading Compliance App used on Keysight Infiniium oscilloscopes. It mimics a real hardware test bench, and, using a scripting technology called "Waveform Bridge," emits the same waveforms that the Infiniium app receives when you are testing in your lab. Thus, the exact same tests no ifs, ands, or buts -- are applied to both the pre-manufacture simulated design and the actual post-manufacture prototype. DDR3 Compliance Test Bench supports not only DDR3 but also LPDDR3.
-
SCR ELEKTRONIKS
SCR ELEKTRONIKS have developed Test Bench for Circuit Breaker to test 2, 5 & 10 at a time. Panel is provided with constant DC current source.
-
W2351EP - Keysight Technologies
The W2351EP DDR4 Compliance Test Bench helps solve the problem of simulation-measurement correlation. In the past, the pre-manufacture design could be simulated and tested using compliance tools from an EDA vendor. And the post-manufacture prototype could be bench tested using compliance tools from test and measurement instrument vendors.However, because of subtle differences between the two vendors independent approaches to compliance, it was almost impossible to correlate the two. This opened the possibility of the pre-manufacture design passing and the post-manufacture prototype failing, necessitating a time-consuming and expensive design spin. In contrast, DDR4 Compliance Test Bench leverages the exact same industry-leading Compliance App used on Keysight Infiniium oscilloscopes. It mimics a real hardware test bench, and, using a scripting technology called "Waveform Bridge," emits the same waveforms that the Infiniium app receives when you are testing in your lab. Thus, the exact same tests no ifs, ands, or buts -- are applied to both the pre-manufacture simulated design and the actual post-manufacture prototype.
-
W2353EP - Keysight Technologies
The W2353EPUSBCompliance Test Bench helps solve the problem of simulation-measurement correlation. In the past, the pre-manufacture design could be simulated and tested using compliance tools from an EDA vendor. And the post-manufacture prototype could be bench tested using compliance tools from test and measurement instrument vendors. However, because of subtle differences between the two vendors independent approaches to compliance, it was almost impossible to correlate the two. This opened the possibility of the pre-manufacture design passing and the post-manufacture prototype failing, necessitating a time-consuming and expensive design spin. In contrast, USB Compliance Test Bench leverages the exact same industry-leading Compliance App used on Keysight Infiniium oscilloscopes. It mimics a real hardware test bench, and, using a scripting technology called "Waveform Bridge," emits the same waveforms that the Infiniium app receives when you are testing in your lab. Thus, the exact same tests no ifs, ands, or buts -- are applied to both the pre-manufacture simulated design and the actual post-manufacture prototype.
