-
product
Count Outside Micrometer
Mechanical counter type with 1/100mm resolution Measuring range: up to 250mm
-
product
Precision mechanical switches
Precision mechanical switches
Often copied but never matched: With a repeat accuracy of 1 micrometer, My-Com has undisputedly been the world's most accurate and compact mechanical limit switch since 1967. Innovative developments have enabled it to be increasingly more reliable wherever it is used. To date, My-Com has proved its impressive reliability in over a million applications.
-
product
Spline Gauging
XT Splines
Popular 2 point spline heads held in stock include:• 20–25mm over 2mm pins• 20–25mm over 2.032mm pins• 24–29mm over 2mm pins• 24–29mm over 2.032mm pins• 25–35mm over 2mm pins• 25–35mm over 2.032mm pinsEach of these application heads can be fitted directly to our Bluetooth XT range of internal micrometers in seconds for fast, efficient use with incredibly accurate results that can be digitally recorded.
-
product
Micrometers
Shadow laser micrometer is a powerful tool for precision measurements in various applications. This device uses a laser beam to project a shadow of an object onto a receiver, allowing for accurate and non-contact measurement of distances and dimensions.
-
product
Ultrasonic Thickness Gauges
A widely used nondestructive test technique for measuring the thickness of a material from one side. It is fast, reliable, and versatile, and unlike a micrometer or caliper it requires access to only one side of the test piece.
-
product
Micrometer - Specialty
Used for specific jobs like measuring the inside and outside dimensions of tube thickness, gear teeth, pitch diameter of fasteners, and for measuring sheet metal thickness.
-
product
Dimensional Calibration
Process Instruments certifies Gage Blocks with a state-of-the-art Pratt & Whitney Gage Block Comparator. Outside and Inside Micrometers, Depth Micrometers, Height Gages, Calipers and Dial Indicators can be repaired and calibrated to manufacturers'' specs.
-
product
Micrometers
micrometers are instruments for very accurate measurements. Measurement in the range of 1000 cm. There are several types of micrometers that are designed to measure different types of objects or spaces:Outside Micrometer,Inside Micrometer,Depth Micrometers,digital Micrometers.The measurement depends on what needs to be measured. As the size of a pipe or vessel
-
product
Slide Anvil Type Outside Micrometer
The slidable anvil provides a wide measuring range with a single micrometer.
-
product
Micrometers
Is a device incorporating a calibrated screw widely used for accurate measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers.
-
product
Micrometers - Digital
Tools designed for measuring the depth, width, or length of a material with a digital display.
-
product
Non-rotating Spindle Type Outside Micrometer
Non-rotating spindle type standard outside micrometer No rotation stress is provided to a workpiece.
-
product
Actuators, Adjusters, & Transducers
We offer a wide range of adjustment screws, micrometers, and kinematic positioners, as well as stepper motor, DC servo, high-precision piezo inertia actuators, and voice coil actuators. Additionally, our piezoelectric offerings include modular, screw, and replaceable-tip piezoelectric actuators, as well as Langevin transducers for ultrasonic welding applications. A wide variety of piezoelectric chips and stacks are also available.
-
product
Non Rotating Spindle Type Tooth Thickness Micrometer
Measures the "root tangent length" of gears. Compatible modules differ depending on the model.
-
product
Long Range Straightness Optics
10775A
The Keysight 10775A combines a straightness interferometer and reflector to provide measurements over a range of 1 to 30 meters (3 ft to 100 ft). The optics form a highly-accurate optical straightedge that can measure the straightness of travel of machine-tool and measuring-machine coordinate motions with a resolution of 0.1 micrometer (10 microinch).
-
product
Particle Sizers
For over four decades, TSI has been at the forefront of providing state-of-the-art aerosol sizing instruments. Our commitment to advancing research and driving innovation spans various industries. TSI is a trusted manufacturer of cutting-edge particle sizing instrumentation and systems, covering a wide range of particle sizes, from 1 nm to 20 micrometers.
-
product
HV Spark Gaps
B-1015
*Spark gaps are enclosed in dust tight transparent enclosures with replaceable non-melting carbon spheres, up to 88kV PK.*Above 88kV, open style with hollow aluminum spheres is standard.*Applications for these units include over-voltage limiting, voltage measurement, capacitor discharge, and pulse forming.*Horizontal unit housings are removable.*Vertical unit housings are not removable.*Micrometer Vernier adjustment is standard for maximum accuracy on most models. Economy units without micrometer Vernier adjustment are available as an option.*Insulation to ground is available at standard and optional levels.*Spark gaps to 370kV, with motor operation available.
-
product
Gunn Oscillators
Gunn Oscillators are solid state microwave energy generators. These consists of waveguide cavity flanged on one end and micrometer driven plunger fitted on the other end. A gunn-doid is mounted inside the waveguide with BNC Connector for D.C. Bias.
-
product
Electrostatic Classifiers And DMAs
These instruments work together to use the electrical mobility technique to determine particle size. This technique is the most appropriate way to measure the size of particles smaller than one micrometer. Indeed, ISO 15900 states that electrical mobility is the preferred mechanism, globally, for submicrometer particle measurement.
-
product
Proving Ring
Morehouse Instrument Company Inc.
The Morehouse Digital Proving Ring reduces operator error and keeps the known stability of a Morehouse analog proving ring. Digital proving rings measure deflection of the ring in electronic "counts", rather than by a mechanical micrometer. This information can be interfaced to a computer, so data can be electronically logged, and the entire process can be automated programmatically. Calculations can be faster, with less operator action.
-
product
Custom Optical Components and Standards
With the amount of applications that optical components have, no one could hope to have the perfect component for every possible scenario. For this reason, APPLIED IMAGE makes easy the process of designing, building, and delivering custom components to our customers. Our engineering process is designed to produce the best parts in the industry and more importantly, the best component for your specific needs. The APPLIED IMAGE experience will cover the project with expert engineers from start to finish. Use the form below to start the conversation for checkerboard and dot arrays, stage and image analysis micrometers, reticles and machine vision components.
-
product
Miniature Translation
M-311 – M-318
Physik Instrumente GmbH & Co. KG
The M-310 series of translation stages are our smallest micrometer-driven positioners. The carriage is spring preloaded against the micrometer tip for elimination of backlash. M-310 series stages are available in one-, two- or three-axis configurations. The latter consists of a two-axis stage, an angle bracket and a one-axis stage. Please note that an XY unit cannot be separated into two one-axis stages. The vertical stage in the M-313 XYZ assembly supports the load through the micrometer spindle (not the preload springs) providing excellent stability.
-
product
Tabletop Front & Backside Mask Aligner
Model 200IR
The OAI Model 200IR Mask Aligner is a tabletop system that requires minimal clean room space. It is a cost-effective alternative for R&D or limited scale, pilot production. Utilizing an innovative, air bearing / vacuum chuck leveling system, the substrate is leveled quickly and gently, for parallel photo mask alignment and uniform contact across the wafer during contact exposure. The Model 200IR Mask Aligner is capable of one micron resolution and alignment precision. It has an alignment mod...show more -
product
Universal (ID/OD) Presetting Instruments
Pratt & Whitney Measurement Systems, Inc.
If gage setting and calibration is important to you, choose the Labmicrometer Model 900 or 1600 measuring system. Designed for gage calibration laboratories and shop floor environments requiring precise internal and external measurements over long lengths. Additionally, the Labmicrometer is ideal for use as a setting bench and adjusting instrument offering precision setting of inside and outside comparative measuring gages, micrometers, snap gauges, as well as other measuring tools.
-
product
Filar Micrometer
*This item is suitable for the microscope using eyepiece lens with a 23.2 mm (diameter) eyepiece sleeve.
-
product
Caliper Type Outside Micrometer
The standard type can measure a part to which the anvil may not access.
-
product
Micrometers
A device incorporating a calibrated screw for accurate measurement of the size of components.
-
product
Nanoindentation Testing in the Micrometer RangeFISCHERSCOPE
FISCHERSCOPE® HM2000
Nanoindentation for professionals. Reliable hardness measuring instrument for determining properties such as indentation hardness and the depth-dependent elastic indenter modulus – and all of that in the nanometer range.