Showing results: 1 - 15 of 15 items found.
-
Rhopoint Metrology Ltd
Features• Easy to use• Integrated probe FN• Automatic substrate recognition• Automatic calculation: Mean/Max/Min/No./S.Dev• Upper-lower limit setting and sound alarm• Data output RS-232 to printer TA-220S or PC• Storage function for 500 measuring results• Measurement modes: continuous/single• Battery operated
-
Rhopoint Metrology Ltd
The depth gauge micrometer is a precision measuring instrument, used by engineers to measure depths
-
Rhopoint Metrology Ltd
1. Always select the dial test indicator that best fits the application.2. Care should be taken while using a dial test indicator, try not to jolt the indicator, should you be unfortunate and drop a dial test indicator, get it re-calibrated/repaired before reusing it.3. Replace worn contact points only with those of a similar length from the centre of the ball stylus to the abutment shoulder.4. Always clean dial test indicators after use with a lint free paper or cloth and store the indicator in its box or in a dust free area.5. When using a dial test indicator, always position the dial test indicator in a horizontal plane to the surface media.6. Always use a rigid stand for mounting the dial test indicator.7. When measuring a rotating object, either between centres or in a vee block, ensure that the object is rotating in the correct direction. Never rotate the workpiece towards the contact point.8. When measuring a sliding object, only take readings when the object is moving directly towards the contact point, never away from the contact point or in a sideways manner.9. Avoid parallax errors by reading the dial directly from the front and square on to the dial.10. Never oil a dial test indicator as this attracts contamination, should the movement become erratic then the dial test indicator should be submitted to a reputable repair agent.11. Try not to expose dial test indicators to direct sunlight or in a high humidity environment.12. Never use a dial test indicator that has not been calibrated, if in doubt consult an appropriate authority.
-
FTM-1 – UKAS -
Rhopoint Metrology Ltd
Baty dial thickness gauges are direct reading instruments for quick and accuratemeasurement of rod, strip or sheet material, such as paper. All standard instruments aresupplied with 10mm (0.39″) diameter at contacts. The well balanced frame andhandgrip make these thickness gauges very easy to use for the measurement of sheet easy to use for the measurement of sheet materials.The lifting lever and springloaded spindle ensures controlled contact pressure on the sample.
-
Rhopoint Metrology Ltd
This high specification handheld glossmeter is suitable for use in many environments including laboratory and production areas and is the ideal choice for general gloss measurements of a variety of substrates and industry sectors including paints and coatings.
-
Rhopoint Metrology Ltd
1. Select the height gauge that best fits your requirement. Ensure that the type, measuring range, graduation and other specifications of the height gauge are appropriate for your application.2. Do not apply excessive force to the sliding and locking mechanisms of the height gauge. Should you be unfortunate and drop the height gauge, before reusing have the height gauge recalibration/repaired by an appropriate repair agent.3. When using a scriber in conjunction with a height gauge, ensure that the scriber tip is not damaged.4. Thoroughly clean the height gauge after use with a lint free paper or cloth ensuring the base and the scriber are cleaned.5. Check the slider movement for smoothness, There should be no free play or intermittent restriction of movement. Report all non conformances to an appropriate authority.
-
Rhopoint Metrology Ltd
It is intended for reference by component producers and gauge makers when gauge limits have not been stipulated. It specifies gauge tolerances for work piece tolerances in ranges between 0.009mm and 3.200mm and how gauge limits are related to the work piece limits. It also specifies types of gauge according to size and minimum work piece tolerance, dimensions are expressed in millimetres but appropriate values in imperial units are given in appendix C.
-
Rhopoint Metrology Ltd
Large 8.5mm LCD digits for ease of viewing.Zero setting is made against a fixed stop and internal angles from 40? to 160? inclusive can be measured.Accessories include an acute angle attachment and a support stand for vertical applications.
-
-
-
Rhopoint Metrology Ltd
We provide an extensive range of calibration services along with repair, refurbishment and replacement equipment where required. Our team of qualified and experienced engineers offer aconsistently high level of service.
-
Rhopoint Metrology Ltd
These advanced Shore Scale Durometers provide fast easy-to-read instruments ideal for testing rubber, plastic, leather and all other soft materials. The gauges can be used in hand held mode or mounted onto a sturdy bench stand for improved accuracy and repeatability.
-
Rhopoint Metrology Ltd
The Digital Caliper (sometimes incorrectly called the Digital Vernier Caliper) is a precision instrument that can be used to measure internal and external distances extremely accurately.
-
Rhopoint Metrology Ltd
Automatic wake-up by moving the measuring spindleSleep mode after 20 min. of no usePosition memorised in sleep modeWater protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, with or without connectorMeasuring range 0-102mm covered with 3 instruments onlySet of 3 micrometers 0-102mm availableQuick displacement of the measuring spindle 12mm / rotationBattery life 12,000 hoursNon-rotating spindlePreset functionSetting masters provided where applicable
-
MTR110 -
Rhopoint Metrology Ltd
The Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements. Conforms to ISO Class 3.Features• Back-light LCD• Dynamic Test Display: progress of cut-off length during testing• Li-ion rechargeable batteries• Protection slide on pick-up• Auto-off after 90 seconds• Pocket-size and economically priced• Both Ra and Rz parameters in one instrument• Features external calibration specimen• Large measuring range suitable for most materials• Piezo-electric pick-up stylus for external surfaces• Includes steel test piece• Includes charger unit• Measurements of shafts above 40mm diameter using the Vee groove in base