-
Product
Spline Gauging
XT Splines
-
Popular 2 point spline heads held in stock include:• 20–25mm over 2mm pins• 20–25mm over 2.032mm pins• 24–29mm over 2mm pins• 24–29mm over 2.032mm pins• 25–35mm over 2mm pins• 25–35mm over 2.032mm pinsEach of these application heads can be fitted directly to our Bluetooth XT range of internal micrometers in seconds for fast, efficient use with incredibly accurate results that can be digitally recorded.
-
Product
Gunn Oscillators
-
Gunn Oscillators are solid state microwave energy generators. These consists of waveguide cavity flanged on one end and micrometer driven plunger fitted on the other end. A gunn-doid is mounted inside the waveguide with BNC Connector for D.C. Bias.
-
Product
Universal (ID/OD) Presetting Instruments
-
Pratt & Whitney Measurement Systems, Inc.
If gage setting and calibration is important to you, choose the Labmicrometer Model 900 or 1600 measuring system. Designed for gage calibration laboratories and shop floor environments requiring precise internal and external measurements over long lengths. Additionally, the Labmicrometer is ideal for use as a setting bench and adjusting instrument offering precision setting of inside and outside comparative measuring gages, micrometers, snap gauges, as well as other measuring tools.
-
Product
CORROSION GAUGE
MX-3
-
With the hand held MX-3 Ultrasonic micrometer, you can make reliable measurements or scan a length of material for the thinnest point. The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The MX-3 comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.
-
Product
Surface Analysis
-
A UHV surface analysis system for thin film depth profilingMeasures the surface composition of the first few nanometers and/or micrometers depth of solid samples.
-
Product
Displacement Measurement Trainer Module
-
Unitech Scales And Measurements Pvt. Ltd
Displacement Measurement module comprises of LVDT with micrometer jig fitted on the base plate to give displacement to the core of LVDT. Digital 3½ digit indicator is supplied to read the displacement in mm.
-
Product
Micrometers - Depth
-
Is used to find the distance between two parallel surfaces i.e. depth of holes, slots, shoulders and projections.
-
Product
Submicron Particle Imaging
FlowCam Nano
-
Yokogawa Fluid Imaging Technologies, Inc.
FlowCam Nano is the next-generation dynamic image analysis instrument for submicron particle imaging and sizing in real-time. FlowCam Nano extends subvisible particle analysis to detect objects between 300 nanometers and 2 micrometers - the smallest visible with light microscopy.
-
Product
Bore Gauging
-
Bowers’ XT3 digital internal micrometers offer an ergonomic design - including a larger and clearer LCD display - along with IP67 electronics protection, proximity output; allowing bi-directional communication giving greater flexibility for data acquisition and storage. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate users most awkward measuring problems. If you need something bespoke, reach out to us at sales@bowersgroup.co.ukIf you prefer the analogue approach, then we offer the same size range in our XT Analogue format.
-
Product
Metallurgical/Metallographic Testing
-
A partial view of our Metallurgical examination areas, showing metallurgical microscopes with digital filar micrometers. These instruments, along with our cross-sectioning and polishing equipment, make the Optical Metallography facilities at Pacific Testing among the most extensive in the industry. In addition, these facilites are under the supervision of our Chief Metallurgist, with a Ph.D. in Metallurgy.
-
Product
Dimensional Calibration
-
Process Instruments certifies Gage Blocks with a state-of-the-art Pratt & Whitney Gage Block Comparator. Outside and Inside Micrometers, Depth Micrometers, Height Gages, Calipers and Dial Indicators can be repaired and calibrated to manufacturers'' specs.
-
Product
Manual Tuners / Impedance Tuners
-
Maury manual tuners are based on precision slide screw technology that utilizes broadband slab line transmission structure and passive probes to create impedances for devices. The probes are designed to be very close to onequarter wavelength in the linear dimension at the mid-band of each range. Since each tuner has two probes, this results in improved matching characteristics for each unit. Another key feature of this series of tuners is the inclusion of a LCD position readout of the carriage position on those units operating below 18 GHz. Higher frequency tuners utilize a micrometer carriage drive. The positional repeatability and high matching range of these tuners make them ideally suited for use as a variable impedance source in applications like device characterization. Such measurements depend upon the ability of the tuner to establish impedances out near the edge of the Smith chart and to reproduce the electrical characteristics as a function of mechanical position. The tuners in this series are also easy to use due to the nearly independent electrical results of the mechanical motions. The depth of penetration of the probe into the transmission line determines the magnitude of the reflection, while the position of the probe along the line determines the phase. While there is some interaction, the effects are almost independent of each other. https://www.maurymw.com/images/mw-rf/mst982e35.jpg
-
Product
Non Rotating Spindle Type Paper Micrometer
-
Micrometer dedicated to measuring paper thickness Anvil diameter: 14.3mm
-
Product
Outside Micrometer Equipped with Dial Indicator
-
Allows measurement with an indicator. Optimal for continuous measurement of mass-production parts.
-
Product
Fixed Anvil Type Screw Thread Micrometer
-
For measurement of the pitch diameter of thread Fixed anvil
-
Product
Micrometers - Digital
-
Tools designed for measuring the depth, width, or length of a material with a digital display.
-
Product
Non Rotating Spindle Type Tooth Thickness Micrometer
-
Measures the "root tangent length" of gears. Compatible modules differ depending on the model.
-
Product
Outside Micrometer
-
Regular product of outside micrometers The frame is provided with a heat insulating cover.
-
Product
Short Range Straightness Optics
10774A
Optical Module
The Keysight 10774A Short Range Straighness Optics combines a straightness interferometer and reflector to make measurements over a range of travel up to 3 m (10 ft). The optics form a highly-accurate optical straightedge that can measure the straightness of travel of machine-tool and measuring-machine coordinate motions with a resolution of 0.04 micrometer (1 uin).
-
Product
High-Accuracy Digimatic Micrometer
-
High-accuracy micrometer with 0.0001mm resolution Instrumental error: +/-0.5um
-
Product
Non Rotating Spindle/Interchangeable Type Universal Micrometer
-
Supports measurement of various shapes with 7 types of interchangeable anvils. An anvil dedicated to screw threads is also available.
-
-
-
Product
Nanoindentation Testing in the Micrometer RangeFISCHERSCOPE
FISCHERSCOPE® HM2000
-
Nanoindentation for professionals. Reliable hardness measuring instrument for determining properties such as indentation hardness and the depth-dependent elastic indenter modulus – and all of that in the nanometer range.
-
Product
Slide Anvil Type Uutside Micrometer
-
Interchangeable anvils provide a wide measuring range with a single micrometer.
-
Product
Non-rotating Spindle Type Outside Micrometer
-
Non-rotating spindle type standard outside micrometer No rotation stress is provided to a workpiece.
-
Product
Slide Anvil Type Outside Micrometer
-
The slidable anvil provides a wide measuring range with a single micrometer.
-
-
Product
Proving Ring
-
Morehouse Instrument Company Inc.
The Morehouse Digital Proving Ring reduces operator error and keeps the known stability of a Morehouse analog proving ring. Digital proving rings measure deflection of the ring in electronic "counts", rather than by a mechanical micrometer. This information can be interfaced to a computer, so data can be electronically logged, and the entire process can be automated programmatically. Calculations can be faster, with less operator action.
-
Product
Micrometer Positioning Stages
-
Del-Tron offers a wide range of linear positioners. These micrometer positioning stages and crossed roller positioning stages are available with travels ranging from .25” to 2.0”. All of are linear positioners are available in X, XY and XYZ configurations and can carry loads ranging from 4 lbs on our miniature ball slide series all the way up to 160 lbs on our crossed roller positioning stages. All model numbers are available with inch or metric micrometers and mounting holes.
