Showing results: 1516 - 1530 of 2704 items found.
-
80942-603-6610 -
ELMA Electronic, Inc.
3U CompactPCI Backplane 3-slot, PICMG 2.0 R3.0, system slot right, supports full hot swap function according to PICMG 2.1 R2.0, clock frequency 66MHz, V(I/O) +3.3V, bus width 32-bit, power input connection with Fastons connectors
-
80932-603-6600 -
ELMA Electronic, Inc.
3U CompactPCI Backplane 3-slot, PICMG 2.0 R3.0, system slot left, supports full hot swap function according to PICMG 2.1 R2.0, clock frequency 66MHz, V(I/O) +3.3V, bus width 64-bit, power input connection with Fastons connectors
-
80952-603-6600 -
ELMA Electronic, Inc.
6U CompactPCI Backplane 3-slot, PICMG 2.0 R3.0, system slot left, supports full hot swap function according to PICMG 2.1 R2.0, clock frequency 66MHz, V(I/O) +3.3V, bus width 64-bit, power input connection with Fastons connectors
-
80942-603-6600 -
ELMA Electronic, Inc.
3U CompactPCI Backplane 3-slot, PICMG 2.0 R3.0, system slot right, supports full hot swap function according to PICMG 2.1 R2.0, clock frequency 66MHz, V(I/O) +3.3V, bus width 64-bit, power input connection with Fastons connectors
-
FastXe2 -
Alacron
The FastXe2 framegrabber series is for users who anticipate a demand for extreme I/O requirements and/or higher bandwidth, complex image processing and real-time high-speed storage in a cost effective platform. The base FastXe, is a one half length raw form factor PCIe (X4) Gen2 board with either six basic 85 MHz Camera Link Channels up to two extended full Camera Link camera interfaces. An auxilliary I/O connector provides a header for adaptation of other high speed interfaces such as GigEx4, high speed analog formats such as UXGA or DVI, or CoaXPress. The front-end data is formatted and preprocessed by a Kintex 7 FPGA before being sent to the PCIe (X4) Gen 2 bus
-
Certus-NX -
Lattice Semiconductor
*Up to 39K logic cells, 2.9 Mb embedded memory, 56 18 x 18 multipliers, 192 programmable I/O, one lane of 5 Gbps PCIe, two lanes of 1.25 Gbps SGMII, two ADCs (each 12-bit, 1 MSPS).*Packages as small as 6x6 mm, and in ball-pitch options of 0.5 and 0.8 mm.*Power modes – User selectable Low Power vs. High Performance modes, enabled by FD-SOI programmable back-bias.*Design security – ECDSA bitstream authentication, coupled with robust AES-256 encryption.*Instant-on configuration – I/O configures in 3 ms, and full-device as fast as 8 ms.*Available in Commercial, Industrial and Automotive (AEC-Q100 qualified) temperature grades.
-
VPX3001 -
ADLINK Technology Inc.
The VPX3001 Series is a 3U VPX processor blade featuring the 3rd Generation Intel® Core™ i7 processor with Mobile Intel® QM77 Express Chipset. The VPX3001 provides up to 8GB DDR3-1066/1333 dual channel ECC memory soldered onboard, one PCI Express x8 XMC.3 site with VITA 46.9 rear IO, and onboard soldered 32GB SLC SATA solid state drive. Rear I/O via P1 and P2 includes 2x 1000BASE-T or 2x 1000BASE-BX (BOM option), 1x SATA 6 Gb/s, 1x SATA 3 Gb/s, 2x USB 2.0, 6x GPIO, VGA, 1x RS-232, and 1x RS-232/422.
-
PIC32MX795 Development Board -
SparkFun Electronics
The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and running. Power can be provided over USB or from an external source. It has three push buttons (Reset, and two user-defined buttons) and five LEDs (Power, USB, and three user defined LEDs). All of the 78(!) of the PIC32's I/O pins are broken out. The board comes pre-loaded with a USB bootloader and special UBW firmware that accepts simple serial commands to control the various I/O functions.
-
PCI325 -
Vadatech Inc
The PCI325 is an RS-422 synchronous/asynchronous multiport serial adapter. The module can accept a clock input to synchronize the baud rate generators of each port to an external clock. All the protocol management overhead is taken care of in the hardware so that the host CPU is offloaded from managing the detailed serial protocol. An I/O breakout box may be connected to the high-density connectors of the PCI325 to provide multiple DB25, DB9, or other serial connectors for easy integration to your system or an octopus-style breakout cable may be used. The I/O breakout box may include many different status LEDs which can be tailored to your protocol/application. The PCI325 provides the breakout box with power so that it does not require any additional power cabling
-
784961-01 -
NI
1.91 GHz Intel Atom Quad-Core Processor, 2-USB3 Port Industrial Controller - The IC‑3121 is a compact and rugged industrial controller that withstands the harsh environments common in automation, supervisory control, distributed control, and industrial embedded OEM applications. The IC‑3121 offers two USB3 ports with dedicated bandwidth, FPGA-based I/O capabilities, and network connectivity for distributed control applications. The advanced features include the ability to synchronize image inspection results with industrial I/O and configure hardware-timed network triggers to trigger camera acquisition, motion control, or data acquisition. You can use the advanced FPGA personality that is shipped with the system or customize the FPGA functionality using the LabVIEW FPGA Module.
-
Euresys Inc.
Two CoaXPress CXP-12 connections: 2,500 MB/s camera bandwidthPCIe 3.0 (Gen 3) x4 bus: 3,300 MB/s bus bandwidthLow-profile card. Delivered with standard and low-profile brackets.Fan-cooled heatsinkFeature-rich set of 10 digital I/O linesExtensive camera control functionsMemento Event Logging Tool
-
8007 -
Sealevel Systems, Inc.
The 8007’s PCI digital I/O interface reed relay outputs provide high quality, long-life, low-current (10 Watt maximum), dry contact switch closures. Reed relays are well suited for low current applications. The relays are normally open, and close when energized.
-
Acromag, Inc.
Acromag provides a broad selection of hardware accessories to simplify the use of our I/O boards. This collection of panels, cables, and adapters facilitate field wiring and cable connections between boards within the card cage. Select from an assortment of cables and termination panels to simplify wiring and installation.
-
5243 -
Technobox, Inc.
Our PMC-to-PCI Express Adapter (PCIe/PCI-e) 1X (5243) permits the use of a single-wide PMC module in a 1x PCIe slot. The A and C rows of a 96-pin DIN connector, located toward the rear of the board, connect with the 64-pin user I/O connector (J4/P4) on the mezzanine card.
-
Marvin Test Solutions, Inc.
High-speed and static 3U and 6U PXI and PCI digital I/O instrumentation. Offering test rates to 200 MHz and programmable logic levels of -10 V to +15 V, our digital products feature the highest performance and most cost effective digital test solutions in the industry.