Showing results: 4126 - 4140 of 5224 items found.
-
ATX Networks Corp.
A critical component of the HFC infrastructure, the node is the demarcation point between the optical and RF segments of a cable access network. The evolution of the node will have significant influence over the future technological direction of the HFC network. ATX is committed to extending its technology expertise to the node portion of the network, beginning with a digital return solution that expands the upstream bandwidth capacity of a widely deployed optical node.
-
Teledyne OEM Solutions
The carousel platform is designed to be sturdy, reliable, and easy to use. The rotating sample tray minimizes space requirements, making it easy to fit into an existing housing. It holds up to 96 samples when fully loaded and contains a microprocessor that allows sequential or random sampling. The autosampler is typically interfaced to and controlled by the host instrument computer using a serial, USB, or IEEE-488 parallel communications cable.
-
15K-W-BB-45 -
mks Ophir
The 15K-W-BB-45 is a water cooled thermal power/energy laser measurement sensor for very high powers with a 45mm aperture. It can measure power from 100W to 15,000W. It has a deflecting cone and annular absorber that withstands high power densities to 10kW/cm². It covers the spectral range from 0.8 - 2 and 10.6µm. The sensor comes with a standard 5 meter cable for connecting to a meter or PC interface.
-
DATASTICK2 -
Com-Ten Industries
The system DATASTICK allows you to save you data on a USB stick in one click, whether you are doing your measurement indoor or outdoor on the field, we propose you a complete mobile solution. All data, results and curve are saved on your USB stick, no more needs of a computer. Connect the DATASTICK to your current gauge CENTOR TOUCH through a dedicated cable.
-
R&S®UMS400 -
Rohde & Schwarz GmbH & Co. KG
The ever-increasing frequency range of wireless communications services calls for monitoring stations up to 8 GHz, in some cases even up to 20 GHz. Typically, this requires a monitoring sensor installed close to the antenna(s) in order to keep cable losses as low as possible for highest sensitivity. This is possible for both the R&S®UMS400 and R&S®CS-MC20, thanks to an outdoor housing.
-
Extech 407123 -
Extech Instruments Corporation
The 407123 Heavy Duty Hot Wire Thermo-Anemometer uses a telescoping probe (extends up to 2 ft) which is ideal for use in ducts and ventilating systems. It can accurately measure Air Velocity and Temperature and simultaneously displays them on the dual LCD. Additional functions include Data Hold and Min/Max measuring modes. Comes complete with telescoping probe with 5.5ft cable, and 6 x AA batteries.
-
National Technical Systems
The indirect effects of lightning are caused primarily by earth-voltage rises that occur when the flash dumps charge into the earth and by the intense electromagnetic field associated with the flash. These fields and earth-voltage rises have enough energy to cause component damage up to a kilometer or more from the actual strike. Indirect effects are most commonly induced into system interconnecting cables and may damage or upset electronic components.
-
HALT And HASS Testing -
TetraTek Products, Inc.
Our VibraTek TM Division manufactures precision machined, magnesium, and aluminum vibration fixtures with stainless steel and aluminum hardware. These fixtures feature TetraTek developed clamps, retainers, connectors, circuit boards, and cable sets to provide you with the ideal testing arrangement for your products while they are tested for HALT (Highly Accelerated Life Testing) and HASS (Highly Accelerated Stress Screening) response.
-
Chroma Systems Solutions, Inc.
The Chroma 16502 Milliohm Meter is Chroma’s newest digital Milliohm Meter. 0.001mΩ~1.9999MΩ wide measurement range. DC, Pulsed, and Dry-circuit test current driving modes, enable the Chroma 16502 can be properly used in DC resistance measurement for various inductive components (coil, choke, and transformer winding etc.), cable, metallic contact (connector, relay switch etc.) and conduction materials.
-
Extech HDV-WTX2 -
Extech Instruments Corporation
The Extech 6mm Wireless Articulating VideoScope Camera has a 320° articulating tip for the best viewing angle. Easy one-hand operation of the articulating camera tip facilitates the viewing in obstructed areas where standard camera tips are otherwise unable to access. A built-in wireless transmitter in the camera cable control allows you to transmit video up to 100ft from the measurement point to your monitor.
-
HTRH-W -
TEGAM Inc.
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
-
HTRH-D -
TEGAM Inc.
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
-
HydroPACT 440 -
Teledyne Marine TSS
The HydroPACT 440 pipe detection system has been established for a number of years as the industry standard, providing accurate and reliable survey data, which provides the position of conductive assets on or beneath the seabed. The system is flexible in its range of uses and can be installed on a variety of vehicles for undertaking survey work.It provides a reliable and simple method for performing accurate submarine surveys on a conductive target such as a cable or pipe.
-
AFL
Integrate FTTX activities into a small and compact wall mount enclosure, providing a safe space to splice, split, distribute, store, and cross-connect fiber optic. Mexfoserv® has a large variety of models available to fit our customers’ needs and specifications, ranging from size, amount of ports, moist and dust protection, indoor and outdoor models, different cable acceptance diameters, among others.
-
Gambit Communications, Inc.
MIMIC Simulator creates a real world lab environment, with 100,000 devices, at a fraction of the cost of physical equipment. It provides an interactive hands-on lab for quality assurance, development, sales presentation, evaluation, deployment and training of enterprise management applications. Users create a customizable virtual environment populated with simulated routers, hubs, switches, WiFi/WiMAX/LTE devices, probes, cable modems, servers and workstations.