-
product
Test Stands DC
forms e.g. B. together with an MTS750 source system, a DC meter testing device with a maximum of 40 measuring stations
-
product
Fumonisin Testing Solutions
Fumonisins are mycotoxins produced by the fungus Fusarium moniliforme. F. moniliforme is a frequent, almost universal, inhabitant of corn. Fumonisin B1, B2 and B3 are present in most corn samples tested, often totaling greater than 1 ppm. Fumonisin is thought to cause equine leukoencephalomalacia in horses, swine pulmonary edema, and human esophageal cancer. The FDA/USDA Working Group on Fumonisin advises less than 4 ppm for products for human consumption, less than 5 mg/kg in horse feed, less than 10 mg/kg for swine feed, and less than 50 mg/kg for cattle feed.
-
product
Multi-Service Transport Test Solution
MX Series
The VeEX MX product series offer a complete test solution for Metro Ethernet network installation and maintenance. Powerful features such as symmetrical and asymmetrical RFC2544 conformance testing, Multiple independent stream generation, Stacked VLAN (Q-in-Q) and MPLS tagging, and Dual Port Traffic Generation/Analysis are available at 10GBase-R, 1000Base-X and 10/100/1000Base-T test interfaces. Fiber Channel testing at 1Gbps and 2Gbps rates is supported on select models.
-
product
Multimeter with Cable Checker Phone Test Lan Wire Test
VA43
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Lan Telephone test multimeter: VA43 is a multimeter with lan wire test. phone test .cable check.
-
product
Desktop Meter Test Station
WECO 300
The WECO-300 Desktop Meter Station offers advanced features, highest quality at exceptional value. A truly compact portable desktop station weighing in at only 16.5 lbs. the WECO-300 provides a safe environment to perform a wide range of functional meter tests.
-
product
Hook Test Clip
PCM
The PCM Parrot hook Test Clip model is a small size hook test clip with a length of 70 mm, including the metal tip and the button.Due to this smaller size it is aimed to be used for many applications as oscilloscope ground, spectrum analyzers, data lodgers multimeter test leads and probes.
-
product
Pressure Test & Calibration Pumps
Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500psi (100bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 918 is an ideal comparison test pump for pressure instruments calibration.
-
product
LCD Arbitrary Test Mode
AllWin Instrument Science and Technology Co., Ltd.
1. Set test mode arbitrarily2. LCD display,menu guiding operation3. Equipped with PLC interface ,optional RS232interface,RS48
-
product
UAT Test Management
User Acceptance Testing is the final stage of the Software Development Life Cycle, which is conducted by the users. User Acceptance Testing is extremely important to determine whether the project is working fine as per the end user's point of view. The UAT test management process has to be done in an organized manner to reap maximum benefits from the process.
-
product
Tecap Automated Test Suite
Control of Automated Test Equipment (ATE) for functional test and in-circuit testOperation of test facilities with adapters and PLCssemi- and fully automatic testing of electronic components and assembliesFinal Test in ProductionTest of pre-series and sample seriesStandardized test program developmentAdaptable to your own system environment (customizing) – 100% usable after installation with standard elements
-
product
Fuel Cell Test Stations
The Fuel Cell Test Stations provides control of flow, temperature and pressure for the anode and cathode gases. The station incorporates a DC electronic load. The Station also includes two humidity bottles, an Operating Manual and a computer utilizing LabView-based software.
-
product
Footwear Testing Machines
Dongguan Amade Instruments Technology Co., Ltd
Footwear testing machines are designed to determine a variety of mechanical and chemical performances of different types of shoe materials and finished shoes including sneakers, high-heeled shoes, leather shoes, casual shoes, etc. There are appearance performance tests including yellow resistance test, ageing resistance test, fastness resistance test, etc, physical performance tests containing flexing resistance test, rubbing resistance test, anti-slip test, etc, biological and chemical performance tests covering PH test, Formaldehyde content test, flame retardant test, etc, and service life test. Applicable to standards of ISO20344, SATRA, ASTM, etc.
-
product
Load & Fatigue Testing
DATASYST Engineering & Testing Services, Inc.
Due to variations in types and levels of load and fatigue exposure, DATASYST works with each client to determine the best possible test plan to capture the information and issues that may be present in application.
-
product
Inclination (Cyclic Motion) Test
This test simulates cyclic motions such as encountered by equipment on marine applications, e.g, pitch, yaw, and roll.
-
product
Testing and Analysis Equipment
Parker's testing and analysis equipment provides a quick, easy and accurate means of monitoring conditions in critical applications such as compressed air, water intrusion, and water treatment systems.
-
product
Environmental Vibration Testing
Whether for independent monitoring or just adding additional channels to an existing vibration controller, the m+p Analyzer real time analyzer provides an ideal solution for measuring vibration and other responses during a shaker test or with shock machines. All test modes allow in-parallel throughput to disk recording so that the raw sample data is available for post-test analysis.
-
product
Compact EMC Test Chamber
EMC-3C
This compact 3 meter test range will settle into test areas of limited space while continuing to produce exceptional performance for EMC measurement. Emission quiet zones of up to 1.5m are accommodated with very repeatable results. Suitable for EMC pre-compliance emissions and compliant immunity testing.
-
product
CAM/TRAC Test Kits
Series 471
The Series 471 CT-VP103S dual well mechanical kits provide a test solution where Z axis, the testing of two PCA’s, and Virginia Panel ITA G12 interface compatibility are required. These can be similar devices, or devices that are used together in a functional test. The Series 471 Kits have the same available features and options as the Series 47 Kits. (Limited sizes available.)
-
product
Altitude Test Chamber
Sanwood Environmental Chambers Co ., Ltd.
The altitude test chambers of Sanwood Technology is designed to allow users to perform temperature, humidity, and altitude condition tests in a combined test chamber, and create multiple conditions to meet multiple test requirements at the same time.
-
product
HV Test Set
Beijing GFUVE Electronics Co.,Ltd.
Used for testing transformer, circuit breaker & switch etc by engineer, for example TTR tester can test transformer turns ratio.
-
product
Handover Test Systems
Family of handover test systems designed for handset-to-network handover testing. Internal step attenuators allow the RF signal between the network access points and the handsets to be dynamically faded up/down. The Ethernet/Serial models run our latest generation 3.x.x firmware that features easy to use ASCII formatted commands.
-
product
Wafer Demounting And Cleaning Machines
Demounting and cleaning to high throughput fully automatic ingot after cutting in the slicing machine and wire saw.
-
product
Enclosure Testing
MET Labs has been dust and water certifying enclosures for manufacturers and panel shops for ingress protection (IP Code) for over 30 years.
-
product
Environmental Testing Services
MIL-STD-810 is a US military specification that puts emphasis on tailoring the test requirements to the conditions that the equipment will experience during its service life.
-
product
Testing Hardtop Convertible
Magtrol designed this Custom Motor Test System for the testing of motors used in hydraulic systems in hardtop convertible roof drives.
-
product
Environmental Test Chamber
The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra-fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip.The temperature controller is used by Korean TEMI display in English/Chinese and German Siemens PLC, it can be communicated to PC via RS-232. The temperature accuracy is 0.1 and humidity is 0.1%R.HThe temperature sensor is platinum PT100 Ohms/MV resistor
-
product
Fume Hood Testing
Test mannequin to simulate a human breathing zone. Comes with a manikin, lab coat, manikin stand, and soft carrying case.
-
product
Diffusion Cell Testing
Teledyne LABS Phoenix™ Dry‐Heat Systems make diffusion‐cell testing faster, easier, and more economical. The Phoenix Systemincludes an advanced diffusion cell design. Options include the compact Phoenix DB-6 six‐cell manual sampling system and the Phoenix RDS automated sampling system capable of handling up to 24 diffusion cells at once.An important advantage of the Phoenix System is the speed with which receptor cell contents are homogenized. Visual testing with red dye placed on the surface of the media at the top of the sampling arm shows complete dispersion occurs within a few seconds.Explore the pages in this section to learn more and to configure your own system.
-
product
Semiconductor Test
Tecap SPACE offers all the functions necessary to control test systems (ATE) for the semiconductor test. Tecap is hardware-independent and can be used with all customer-specific concepts.
-
product
Switch Stick Test Equipment
Hanco units provide a full high voltage electrical test as required by OSHA. Front-loading, top-loading and portable units are available.- Sticks can be tested wet or dry.- Test units are available to test sticks up to 14 or 21 feet maximum length or up to 8 feet for the portable unit.
