Watch Battery
single cell battery 5-20 mm round and 1-6 mm thin.
-
Product
Battery Conductance Tester
BT-3918
-
Kongter Test & Measurement Co., Limited
The excellent performance of BT-3918 battery conductance tester will help you pick out the weak batteries and ensure battery performance in short time measurement. This test of battery internal resistance or battery conductance is essential for stationary batteries. It is also recommended by latest regulation of IEEE 450, IEEE 1188 and IEEE 1106.
-
Product
High Current Probes (Battery Contacting) HC200D06G73TYPKF
1125169
-
The High Current Probes (Battery Contacting) HC200D06G73TYPKF, part number 1125169, is engineered for reliable performance in high-stakes applications, offering an impressive temperature range of -45°C to +200°C. These probes ensure robust connectivity with a continuous current capacity of up to 300 A and a minimal typical contact resistance of just 0.20 mOhm, making them ideal for precision battery testing and other electrical applications demanding high current and thermal resilience.
-
Product
High Current Probes (Battery Contacting) HCF77214B200G150A
1165650
-
The High Current Probes (Battery Contacting) model HCF77214B200G150A is designed to meet rigorous demands in precision measurement and battery applications. With a robust temperature range of -45°C to +200°C, this probe ensures reliable performance in extreme conditions. The basic contact probe design features a pitch of 2.54 mm, making it ideal for compact setups. The continuous current rating of 20A enables it to handle significant electrical loads without compromising safety or performance. Its typical contact resistance of just 10 mOhm further enhances its ability to deliver accurate measurements while minimizing energy losses.
-
Product
Battery Monitoring System
FST-TA
-
Foresight Electronics Co., Ltd.
Continuous 24/7 on-line monitoring One CELLCHECK monitor one cell, including internal resistance, voltage and temperature Software is available to collect data from CELLCHECK Serial port with Optical isolation, meet MODBUS protocol, easy to be accessed by UPS controller Easy to install without specialized training Full resistance, battery temperature and voltage monitoring for comprehensive battery state of health analysis String current and ambient temperature monitoring
-
Product
Mixed Signal Battery Test System
Test System
The Mixed-Signal Battery-Test System is an automated test platform designed to meet today’s advanced battery test requirements. The platform is ideal for testing a range of battery cells and packs, and can be used in applications such as research and design, quality control, and end-of-line manufacturing. Its distributed architecture provides a scalable solution with configurable system components to accommodate specific applications.
-
Product
Battery Test Equipment
-
Improper functioning of battery systems installed in utilities, power plants, telecommunication systems, industrial applications and etc., can cause severe failures of the supported equipment and loss of critical information. Therefore, the battery test verifies their actual SOC (State of Charge) or SOH (State of Health) and prevents unwanted scenarios which could result in a significant budget loss as well as endanger of human lives.DV Power battery test equipment is able to perform the following battery measurements, using BLU and BVR devices:- Voltage (String and Cell)- Capacity- Temperature- Density of electrolyteAll of the above-mentioned measurements are performed with the highest accuracy. The advanced DV-B Win PC software enables collecting both numerical and graphical results. These features provide an easier and more efficient analysis. After the test, DV Win software generates a test report with a single click. A user can easily customize the report and save it in different formats, such as CLS, PDF, Word, or RTF.
-
Product
Battery Loading Unit
BLUe
-
BLUe series Battery Loading Units; portable instruments for controlled & monitored discharge of batteries. It is designed for integrated site discharge test, design & QC test and also for monitoring discharge process of battery bank with connected load. Single autonomous unit having inbuilt display, keypad and wireless communication with PC makes it very easy to use. It comes in different configurations ranging from 12V to 380V discharge voltages and 50A to 300A discharge currents. Various options are available to control & monitor the discharge process. With the help of optional Cell Monitoring Unit - CELLMon, voltage of each individual cell can be monitored & data sent to main BLUe unit and then from main unit to PC via wireless communication. Each BLUe unit is supplied with PC downloading & analysis software for real time monitoring of discharge process.
-
Product
Constant Temperature Humidity Battery Test Chamber
-
Guangdong Test EQ Equipment co., Ltd.
- Battery-Specific Thermal Management: Dual-compressor cascade cooling (-40°C stability) and ceramic heaters for rapid high-temperature recovery.- Precision Electrochemical Control: Integrated battery cyclers with CAN/Modbus protocols, supporting SOP (State of Power), SOH (State of Health), and DCR (Direct Current Resistance) monitoring.- Safety-Centric Design-meet Hazard Level: Chambers are designed with Fire-resistant stainless steel interior, fire suppression,nitrogen purge system, and emergency power cutoff for thermal runaway prevention .- Data Acquisition & AI Analytics: Real-time logging of voltage, current, temperature, and pressure via LabVIEW/Python APIs. AI-driven anomaly detection reduces test cycles by 30%.- Energy Efficiency and Energy Storage: Heat recovery during discharge cycles cuts energy use by 25% (ISO 50001 compliant).
-
Product
High Current Probes (Battery Contacting) HC200A06G70
1033973
-
The High Current Probes (Battery Contacting) HC200A06G70 exemplify cutting-edge design and functionality tailored for efficient electrical measurement methods. With a robust coaxial structure, these probes are engineered to handle continuous currents of up to 300A, making them suitable for high-demand applications. Optimized for use in temperatures ranging from -45°C to +200°C, the HC200A06G70 is a versatile choice for environments requiring reliable performance under extreme conditions. The precise contact resistance, typically measured at 0.20 mOhm, ensures exceptional electrical connectivity, while the 5.60 mm nominal travel provides flexibility in application without compromising on stability.
-
Product
High Current Probes (Battery Contacting) HCF73506B300G500A
1090925
-
The High Current Probes (Battery Contacting) HCF73506B300G500A are essential components for high-performance electrical applications, especially in environments where reliability and efficiency are paramount. Designed as a Basic Contact Probe, this model boasts a pitch of 5.00 mm (197 mil) and operational temperature ranges between -45°C to +200°C, making it suitable for various industrial uses. Whether in extreme cold or intense heat, these probes maintain their integrity, ensuring dependable connections where needed most.
-
Product
New Car 24v Battery Tester With Printer
-
Hangzhou Xun Anda Electrical Co., Ltd.
1. Test application: 12V/6V batteries test and 12V Starting /Charging system test.2. Test battery type: regular liquid, AGM battery, GEL battery.3. CCA test range: 40~2000CCA (SAE).4. Voltage test range: 1.5-15V.5. Display SOH (state of health), SOC(state of charge).6. Test for multiple battery standards: SAE, DIN, EN, IEC, CA.7. Graphic LCD display with back light, LCD brightness adjustable.8. Multigle language operation: English, Chinese, Germany, French, Spanish.
-
Product
Emergency Battery Test Fixture
TA-60
-
This test fixture will allow servicing of the 60-1321-( ) series of emergency exit light power supply. These supplies are used in many aircraft to annunciate exit lighting when aircraft power failure occurs. The TA-60 test fixture is equivalent to the suggested test fixture in the OEM 60-1321 CMM. The four load lamps are conveniently placed behind an acrylic red lens for proper viewing while performing load test. The bench cable is provided as part of the test fixture.
-
Product
12V 30A Battery Load Bank/Battery Discharge Tester
FST-DC12V-30A
-
Foresight Electronics Co., Ltd.
Battery load bank BLU-T is a powerful and lightweight solution designed for condition assessment of telecommunication and radio equipment backup supply. This instrument can perform the battery capacity test on battery strings such as Pb, Li-ion, Ni-Cd, and others Discharge parameters can be monitored in real-time during the capacity test.
-
Product
Automatic Capacitor Batteries
-
Lifasa - International Capacitors, SA
The batteries of capacitors for automatic AT are designed for those applications in which the power levels in the AT network are variable. This type of equipment, with a number of steps normally between 2 and 4 to avoid phenomena in the installation resulting from the connection and disconnection of the capacitors in the electrical network, is controlled by a type MCX regulator, which tunes and regulates the input of the steps according to load levels, taking into account the expected waiting times of AT that between consecutive connections is 600 s., this time we can reduce it to less than 10 s. if we install TP for fast download.
-
Product
Battery Management LEM BMS Software
CELLooK
-
LEM is the latest and most advanced Battery Cell Monitoring System. The CELLLook is the web-based Software that could monitor, diagnose and analyze the Battery cell capability by an internet access. (Developed DB engine in Korea and registered a trade mark). The auto alarm, diagnostic and analyzing software for all Microguard data that Jaeshininfomation Co., Ltd with Web2.0 solution.
-
Product
High Current Probes (Battery Contacting) HCF73205B200G300A
1165555
-
The High Current Probes (Battery Contacting) HCF73205B200G300A is engineered for precision in demanding environments, showcasing a robust thermal tolerance ranging from -45°C to +200°C. Designed as a basic contact probe under the model number HCF732, it features a compact pitch of 2.54mm, making it an ideal choice for applications requiring exacting specifications and reliability. The probe not only stands out for its mechanical resilience but also excels in electrical performance, capable of handling continuous currents of up to 20A while maintaining a typical contact resistance of just 10mΩ, ensuring efficient power transfer for high-performance applications.
-
Product
Battery Discharge Test Unit
125V DC 100A
-
KV Hipot Power Test Equipment Co.,Ltd
Battery Discharge Capacity Tester is used to perform discharge testing which is the verifiable method to determine actual capacity of battery systems.
-
Product
Battery Test Equipment
-
Batteries are the heart of many Stationary, Critical Power, Industrial and Motive Power applications which means they need regular monitoring and testing to ensure they can deliver power on demand. We give you the correct products to monitor and test batteries’ capacity.
-
Product
High Current Probes (Battery Contacting) HCF73306B300G600
1000793
-
The High Current Probes (Battery Contacting) HCF73306B300G600, order code 1000793, are specialized components designed to deliver high precision and reliability in electrical measuring applications. Engineered to operate effectively under a temperature range of -45°C to +200°C, these probes are ideal for demanding environments. Their basic contact probe design features a pitch size of 4.00 mm (157 mil), making them exceptionally suited for a variety of applications requiring accurate and efficient electrical contact.
-
Product
Motorcycle Battery Testers
-
ELAK Motor-Cycle Battery Testers are designed for testing batteries used in motor-cycles, scooters, ATV''s, etc. These testers check the voltage drop of the battery under a fixed load and confirm the status of the battery full, weak or dead. The new generation motor-cycle and scooters are fitted with an electrical start. It is therefore very essential to test these batteries under load, to ensure that the batteries are capable of starting the vehicle.
-
-
Product
Battery Capacity Testers|Discharge Testers
-
DV Power offers a wide range of battery capacity testers to meet specific customer needs. All of them are portable, powerful and most of all universal. Any battery string, such as lead-acid, lithium-ion, nickel-cadmium based and others, with voltages in the range of 0,9 – 800 V DC can be tested in an accurate, user-friendly way.The capacity test is carried out following the battery testing standards: IEEE 450-2010, IEEE 1188-2005, IEEE 1106-2015, IEC 60896-11/22, and other relevant standards.BLU battery testers enable setting the discharge current up to 350 A, with 0,1 A resolution. If higher currents are required, several units can be connected in parallel, or BXL additional load units can be used. Discharge parameters can be monitored in real-time during the capacity test. Overall battery voltage, current, elapsed test time and capacity will be presented during the entire test on a touch screen display.
-
Product
Battery Capacity Analyzer
601B
-
The 601B Battery Capacity Analyzer addresses the need to test and maintain sealed lead acid (SLA) batteries used in backup power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems. By quickly characterizing a battery's response to a load resistance and measuring the battery's internal resistance, this meter displays the remaining battery capacity as an indicator of the battery’s health. Powered by the battery under test, the 601B supports testing of both 6 V and 12 V storage type lead acid batteries.
-
Product
Battery Management (BMS) Environmental Test System
Test System
The BMS Environmental Test System is a configurable platform simulating the essential signals used by Battery Management Systems (BMS) and cell-monitoring modules with the ability to perform environmental testing on multiple BMS units simultaneously. The system implements single-point value testing to evaluate specific BMS functions such as cell over and under voltage scenarios, cell leakage current, lost communications, or faulty system IO.
-
Product
Battery Testing
-
With the increasing dependency of back up systems on battery strings, and the escalating cost of replacing batteries, instrumentation and software systems that can measure, trend and manage the life-cycle of cells is a cost effective option.
-
Product
Lithium-Ion Battery Pack, B2983 / B2987
N1418A
Power Supply
Use for the B2983A femto/picoammeter and the B2987A electrometer/high resistance meter.
-
Product
Heavy-Duty Sealed Solid-State Battery Press Mold
HDS1
-
A heavy-duty sealed solid-state battery compression test fixture for laboratory research, featuring a customizable Ø9–16 mm bore, TC4 titanium alloy electrode column, PEEK insulation, and reliable high-pressure performance.
-
Product
Lipo Battery Power Level Tester & Alarm to Indicate Low Power
#52023
-
Can be used for 7.4V (2S pack)and 11.1V (3S pack).Red LED will flash when cell is below 3.3V and an Alarm will sound when cell is below 3.0V indicating the Lipo Battery pack should be recharged.
-
Product
Square Solid-State Battery Test Fixture
SCM1
-
A square solid-state battery test fixture for laboratory compression testing, featuring a customizable pressing area and stable clamping structure for repeatable experiments.
-
Product
High Current Probes (Battery Contacting) HCF73207B175G300A
1165583
-
The High Current Probes (Battery Contacting) HCF73207B175G300A is a critical component designed for precision applications. This basic contact probe features a pitch of 2.54 mm and operates effectively within a temperature range of -45°C to +200°C, making it suitable for various environments. With a continuous current rating of 20.00 A and a typical contact resistance of just 10.00 mOhm, this probe ensures reliable conductivity and minimal energy loss. Its robust construction and materials, including a beryllium copper plunger and a silver-plated brass barrel, provide durability and optimal performance even under challenging conditions.
