Stepping Motor
A device that translates electrical pulses into precise mechanical movement. The output shaft may deliver rotary or linear motion. (www.seanet.com)
See Also: Electric Motor, Servomotor
-
Product
Attenuation Control Unit, DC to 26.5 GHz, 0 to 101 dB, 1-dB Steps
J7201C
Attenuator
Designed for wireless communication and aerospace and defense applications in both R&D and manufacturing test.
-
Product
Electric Servo Motor Type High Speed, High Load, Large Displacement Vibration Tester
-
This tester is a high-speed, high-acceleration vibration tester equipped with an electric servomotor actuator.
-
Product
Motor Testers
-
Changzhou Chanlon Electronic Technology Co., Ltd.
This machine is applied to test steel casing motor such as pump, fan, air-condition motor, mower, paper shredder and refrigerator etc. Its LCD shows all technical data which obtained by industrial control computer, which check and verify the quality of testing stator.
-
Product
Motor Drive Control
-
Four motor speed drive control models ranging from a simple speed dial/display to complex machine/process synchronizers. Capable of many motor/machine control schemes, from open-loop master to closed-loop pulse-locked speed/event synchronized follower. Compatible with all motor speed drives of any size/power rating with an analog input (AC, AC Vector, DC and Servo)
-
Product
Digital Roller Brake Tester for Cars and Vans up to 4.0 T Axle Load with 2 x 4 kW Drive Motors and Max. Track Width of 2,500mm
C_MBT C 4.0 W250 | VP 210157
-
Maschinenbau Haldenwang GmbH & Co. KG.
Digital roller brake tester for cars and vans up to 4.0 t axle load with 2 x 4 kW drive motors and a max. track width of 2,500 mm.Particularly suitable as stand-alone tester or as part of car reception and diagnostic test lanes for larger vehicles such as SUVs, off-roaders or vans, and with high vehicle throughput and increased loads.
-
Product
Electric Servo Motor Type 2 · 4 Poster Vibration Tester
-
It arranges four 3-axis vibration testers equipped with a high torque, ultra-low inertia servomotor to test the vibration of the finished vehicle.
-
Product
Transient Motor Starting Analysis
TMS
-
The Transient Motor Starting Analysis module (TMS) is a state-of-the-art time simulationprogram to analyze all aspects of motor starting problems accurately.
-
Product
Stepper Motor Controller for PCI
PCI321
-
The PCI321 Intelligent Stepper Motor Controller with amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. The local processor handles all high-level commands to provide maximum control for both straightforward as very complex applications.
-
Product
Step Probe F73216B1064G300SP1
1011271
-
The F73216B1064G300SP1 Step Probe is designed for high-precision applications, merging the essential functionalities of the F732SP model with advanced technical capabilities. Built to operate efficiently within a temperature range of -45°C to +100°C, this probe maintains stability and reliability even in challenging thermal environments. The design features a pitch of 2.54 mm, optimizing it for various electronic testing applications where space and precision are critical.
-
Product
Motor Starting & Control Resistors
-
Motor Starting Resistors are used to reduce the voltage at the motor terminals and also decrease the starting current. Motor Starting Resistors are necessary because the self resistance of a motor armature is very low. When the voltage is first applied, excessive current will flow. For limiting this current, since there will be no resisting back electromotive force (emf),some series resistance can be added to the armature windings.
-
Product
Step Probes (F733SP) F73316B0065G300SP
1000972
-
The F733SP Step Probe (Order Code: 1000972) is engineered for precision and durability, capable of operating within a temperature range from -45°C to +100°C. With a pitch size of 4.00 mm, this probe is designed for high-performance applications requiring exact measurements. It features a continuous current rating of 10 A, ensuring reliable functionality in demanding electronic environments. The typical contact resistance is impressively low at 25 mOhm, making this step probe a vital component in ensuring optimal performance in electrical applications.
-
Product
Step Probes (F732SP) F73211B1065G300SP1
1011049
-
The Step Probes (F732SP) F73211B1065G300SP1 is an advanced component designed for high-precision applications in electronics testing and assembly. These probes are manufactured with meticulous attention to detail, ensuring accuracy and reliability under various conditions. With a pitch of 2.54 mm, these probes are capable of operating at temperatures ranging from -45°C to +100°C, making them suitable for a wide variety of environments. Their design allows for effective electrical connections, supported by robust specifications that guarantee performance.
-
Product
Motor Torque Detector
MT Series
-
High-performance motors including ultra-precision motors are used in various fields. Many different types of motors are used in versatile applications, such as ultra-high-speed motors used in home appliances, low-speed motors used in OA equipment and AV equipment, and ultrasonic motors.
-
Product
Motor Drive Analyzer, 500 MHz, 8 Ch, 12 bits, 10 GS/s, 50 Mpts/Ch
MDA 8058HD
Analyzer
Static power analysis - like a dedicated power analyzer.Dynamic power analysis – capture more information.Complete test coverage – control system, power section, motor.Comprehensive mechanical interface.Harmonics calculation option.Vector display option (THREEPHASEVECTOR).Waveform Transformations option (THREEPHASEdq0).16 Channels with OscilloSYNC™.
-
Product
Motor Drive Analyzer, 350 MHz, 8 Ch, 12 bits, 10 GS/s, 50 Mpts/Ch
MDA 8038HD
Analyzer
Static power analysis - like a dedicated power analyzer.Dynamic power analysis – capture more information.Complete test coverage – control system, power section, motor.Comprehensive mechanical interface.Harmonics calculation option.Vector display option (THREEPHASEVECTOR).Waveform Transformations option (THREEPHASEdq0).16 Channels with OscilloSYNC™.
-
Product
328mm focal length, motorized Czerny-Turner Spectrograph
Kymera 328i
-
Intelligent and multi-modal spectroscopy platform for Physical and Life science. Adaptive Focus, automated optimization for the best quality of focus. 328 mm focal length, F/4.1 aperture; Ideal combination for a wide range of applications ranging from luminescence/photoluminescence spectroscopy to more demanding, higher resolution Raman spectroscopy or plasma studies.
-
Product
Step Probes (F732SP) F73211B0083G300SP
1000934
-
The Step Probes (F732SP) F73211B0083G300SP are engineered for precision applications, boasting a fine pitch of 2.54 mm (100 mil) suitable for various testing environments. With an operational temperature range of -45°C to +100°C, these probes hold up against extreme conditions while maintaining reliability and functionality. The Step Probes are designed to endure continuous current up to 5.00 A with a typical contact resistance of just 20 mOhm, ensuring efficient electrical conductivity and minimal thermal loss during operation.
-
Product
Motorized Potentiometer
Mounting On Circuit Board Or DIN Rail
-
INELTA Sensorsysteme GmbH & Co. KG
*PCB mounting*Suitable as: setpoint device or rotary actuator*Compact in design* Robust aluminium housing* Gear safety clutch
-
Product
Custom Motor Test Systems
-
Magtrol's Customized Motor Test Systems (CMTS) are PC-based, turnkey systems custom designed and built to meet your specific motor testing requirements. By integrating Magtrol's motor test equipment with power supplies, adaptable fixtures, custom tables/cabinets, printers, etc., Magtrol's engineering team can customize PC-based, turnkey systems and modular test benches for almost any motor test application.
-
Product
Step Probes (F731SP) F73111B0029G100SP
1032529
-
The Step Probes (F731SP) F73111B0029G100SP is a sophisticated component designed for precision in various applications. With a pitch of 2.40 mm (94 mil), this probe can operate effectively at temperatures ranging from -45°C to +100°C, making it suitable for both standard and extreme environments. This model not only excels in functionality but also emphasizes reliability with a continuous current rating of 5.00 A and a low typical contact resistance of just 20 mOhm, ensuring efficient electrical conductivity in critical operations.
-
Product
Electric Servo Motor Type Horizontal Impact Tester
-
This is a horizontal impact tester using an electric servo motor type actuator system.
-
Product
Step Probes (F733SP) F73316B1077G300SP1
1000883
-
The Step Probes (F733SP) are precision-engineered components ideal for a variety of advanced electronic applications. Designed with a pitch of 4.00 mm and capable of operating in extreme temperature conditions ranging from -45°C to +100°C, these probes ensure reliable performance under demanding circumstances. With a nominal travel of 4.00 mm and a maximum travel of 5.00 mm, the F733SP offers exceptional pointing accuracy of +/- 0.10 mm, making them indispensable in high-precision tasks. The probes are built to accommodate continuous currents of 10.00 A while maintaining a typical contact resistance of just 25.00 mOhm, thereby ensuring minimal energy loss and optimal conductivity.
-
Product
Multi Channel Linear Vibration Motor Aging Tester
BK8018B
-
The BK8018B is our biggest Aging Tester for linear vibration motors. Connect up to 20 DUT's and the system will automatically test them all simultaneously. As well as evaluating current, it can also connect to accelerometers to test vibration characteristics. You can see information on the monitor in real time, and also store it to analyze later so you can keep track of the accuracy and stability of your manufacturing process. In addition, we will modify BaKo’s BS1123-BS8018 program to fit your needs so that the testing you do is a custom fit.
-
-
Product
Stepper Motor ,High-Precision Linear Stages,Application for Industry
KSAXXX-13-X
-
Model: KSAXXX-13-XStepper Motor ,High-Precision Linear Stages,Application for Industry
-
Product
Programmable Step Attenuator, DC to 26.5 GHz, 90 dB, 10 dB steps
84906K
Attenuator
The Keysight 84906K programmable step attenuator offers coaxial measurements to 26.5 GHz in a compact, rugged design. It offers repeatability of better than 0.03 dB, excellent life (greater than 5 million switching cycles per section) and an attenuation range of 0 to 90 dB in 10-dB steps. This latest design evolution sets new standards for size and performance. High attenuation accuracy and low SWR are achieved through the use of miniature thin-film attenuation cards composed of high-stability tantalum nitride film of saphire substrate. Insertion loss is outstanding, with less than 2 dB of loss at 26.5 GHz. The compact size of the unit, 35 percent smaller than the Keysight 8495/7 (26.5 GHz) family, allows for easy integration into instruments and ATE systems.
-
Product
Step Probes (F733SP) F73316B1057G150SP1
1011026
-
The Step Probes (F733SP) series, including the specific model F73316B1057G150SP1, is engineered to provide exceptional accuracy and reliability in a variety of demanding applications. This model boasts a pitch of 4.00 mm (157 mils) and operates flawlessly across a temperature range of -45°C to +100°C. The F73316B1057G150SP1 is particularly notable for its precise performance, featuring a nominal travel of 4.00 mm and a maximum travel of 5.00 mm, ensuring accurate probing in diverse situations.
-
Product
Step Probe F17511B0012G150SP
1025045
-
The Step Probe F17511B0012G150SP (item number 1025045) is a Spring Contact Probe with a disc-shaped contact area for position and presence testing. On F17511B0012G150SP, electrical contact is established only at the intended penetration depth, making the Step Probe suitable for position and presence checks on connectors. F17511B0012G150SP is suited to contacts located in housings, recesses or difficult-to-access areas because its disc head makes contact only at a defined penetration depth. Key mechanical specifications include pitch 1.9 mm / 75 mil, step diameter 1.2 mm, pin diameter 0.6 mm, pin length 2 mm, spring force 150 cN, pointing accuracy ±0.08 mm. F17511B0012G150SP is rated for 4 A continuous current with a typical contact resistance of 20 mΩ. The stepped contact geometry of F17511B0012G150SP makes electrical contact only in the intended installation position and can therefore help detect missing or incorrectly positioned terminals.
-
Product
Ultra-High Precision Motorized Vertical Stages
-
Model: KSAV Ultra-High Precision Motorized Vertical StagesKSAV1010/2030-ZF is new product, wedge vertical stage with.high-resolution, so many advantages: high-stability, high-load and capacity in vertical position,self-locking.applicatin filed: high postion precision,high load capacity,limited space and so onCharacteristic ◆Cross ball screw rail,precion ground ensure resolution, straightness,high load capacity, limited space◆small travel improve resolution◆stepper motor and DB9 interface, choose controller flexibility◆switches ensure safe when operate◆ planning other specification and size
-
Product
Motor Performance Tester
CT Series
-
Shanghai Aoboor Electric Co., Ltd.
Test the cogging torque of motors, separate motor cogging torque and friction torque accurately; cogging torque test results is independent of test speed and speed fluctuation.
