Stepping Motor
A device that translates electrical pulses into precise mechanical movement. The output shaft may deliver rotary or linear motion. (www.seanet.com)
See Also: Electric Motor, Servomotor
-
Product
Motorized Potentiometer
-
INELTA Sensorsysteme GmbH & Co. KG
More than 10.000 Variants. Free configurable.
-
Product
Slip-Ring Motor Starting Panels
Rotor Starter
-
The Slip-Ring Motor Starters are based on the series of resistors that are applied to the rotor circuit to control the speed/torque characteristics of the motor. Rotor starters are mainly used for the motor starting applications requiring high-starting torque like loaded belt conveyors in mining industry. By external resistors, it is possible to shift the motor maximum (break-down) torque up to starting torque point for motors under heavy loads during start-up. The resistors are splitted into some steps and controlled via contactors by motor starting control system. As the motor speed increases, the external rotor resistors are eliminated by shorting contactors until all external resistors are shorted out.
-
Product
Step & Repeat Non-Contact Inspection System for FPC and PCB
OHT-Ⅴ
-
*Space-saving design and highly efficient and high-speed inspection, with top and bottom slider structure*Roller head enables to handle the reverse imposition.*Easy operation by new alignment mechanism*The machine handlingPCB is called "WSR"
-
Product
Multi-Channel Attenuation Control Unit (5-channels), DC to 18 GHz, 0 to 121 dB, 1 dB Step
J7205B
Attenuator
The J7205B is a multi-channel (5-channels) attenuation solution for signal attenuation and conditioning of up to 5 devices under test (DUT). Operating frequency from DC to 18 GHz, with 121 dB, 1 dB steps. Exceptional 0.03 dB insertion loss repeatability per section for the entire 5 million cycles and excellent attenuation accuracy and flatness, the J7205B reduces cost of ownership and provide the best measurement accuracy.
-
Product
Step Probes (F733SP) F73316B1018G150SP
1007426
-
The Step Probes (F733SP), specifically the F73316B1018G150SP model, combine an innovative design with robust technical capabilities. With a pitch of 4.00 mm (157 mil), these probes are engineered to operate effectively at varied temperatures ranging from -45°C to +100°C, making them suitable for a wide range of applications. The critical dimension specifications, including a total length of 28.50 mm and a projection height of 10.50 mm, ensure precise performance and reliability in demanding environments.
-
Product
Step Probes (F732SP) F73211B0024G300SP
1022911
-
The Step Probes (F732SP) F73211B0024G300SP is a highly precise electromechanical device designed for various applications where reliable connectivity is crucial. This model features a unique pitch of 2.54 mm, making it ideal for intricate electronic components. The operational temperature range of -45°C to +100°C ensures performance stability under extreme conditions, catering to diverse industrial needs. Constructed with high-quality materials, the plunger is made from beryllium copper and plated with gold, enhancing its conductivity and durability. The brass barrel similarly features a gold plating, ensuring a robust performance over time.
-
Product
2 Ch Linear Vibration Motor Tester
BK2120C
-
the BK2120C runs up to 4 vibration sweeps, which you define, to check whether your linear vibration motor is within the limits you set. And now you can set up your own feedback so it's even easier to determine the class of pass or the reason for failure. You still get fast, high quality testing for your linear vibration motors on the product line. And it's still versitile enough to be used for QA or QC as well.
-
Product
Step Probes (F732SP) F73211B1051G150SP
1008897
-
The Step Probes (F732SP), specifically model F73211B1051G150SP, are engineered to deliver exceptional reliability and precision in a wide range of applications. With a pitch of 2.54 mm (100 mils) and a temperature range from -45°C to +100°C, these probes excel in environments demanding durability and accuracy. The continuous current rating of 5.00 A ensures they are suitable for high-performance electronic testing, while the typical contact resistance of just 20 mOhms allows for minimal impact on the circuit being tested.
-
Product
Step Probes (F731SP) F73111B0015G300SP
1000957
-
The Step Probes (F731SP) model F73111B0015G300SP is designed to meet a wide range of technical demands in both electrical and mechanical applications. With a compact pitch of 2.40 mm (94 mil), this probe operates effectively across a temperature range of -45°C to +100°C, making it suitable for various environments. The continuous current capacity of 5.00 A ensures reliable performance under load, complemented by a typical contact resistance of just 20.00 mOhm which minimizes signal loss and enhances overall efficiency.
-
Product
Step Probe F73211B1038G150SP
1008924
-
The F732SP Step Probe is a precision-engineered tool designed for a wide range of temperature applications, operating effectively between -45°C and +100°C. Its unique structure ensures a robust performance with a continuous current capacity of 5.00 A and an impressively low typical contact resistance of 20.00 mOhm. The probe is an essential component for applications requiring accuracy and reliability, featuring a nominal travel of 4.00 mm and a maximum travel of 5.00 mm, complemented by a pointing accuracy of just +/- 0.08 mm.
-
Product
Step Probes (F731SP) F73111B0014G150SP
1142356
-
The Step Probes (F731SP) F73111B0014G150SP are designed for precision applications, featuring a compact yet robust design that ensures reliability in various environments. With a pitch of 2.40 mm, these probes can effectively measure across a range of temperatures from -45°C to +100°C, making them ideal for use in challenging conditions. Additionally, the probes are constructed with high-quality materials including beryllium copper for the plunger and brass for the barrel, both of which are further enhanced with gold plating to minimize oxidation and ensure consistent performance over time.
-
Product
Digital Step Attenuators
-
Ranatec’s digital step attenuators covers all mobile frequency bands and gives a calibrated attenuation range of more than 90 dB in steps of 0.25 dB. All Ranatec digital attenuators are built as modules and offers both serial and parallel control logic.
-
Product
Motor Octane Testing
DewTrak II MO
-
DewTrakII MO dew point/humidity transmitter is an optical chill mirror hygrometer designed to continuously measure the moisture content and Barometric pressure in the motor octane testing process. It is used to monitor and ensure compliance with test
-
Product
Step Probes (F733SP) F73316B1010G150SP
1006553
-
The Step Probes (F733SP) F73316B1010G150SP, carrying the order code 1006553, are engineered for precision and reliability in various technical applications. They feature a design specifically tailored for effective functionality, with a pitch of 4.00 mm (157 mil) and an operational temperature range of -45°C to +100°C. This makes them suitable for diverse conditions, ensuring consistent performance across multiple environments. The plunger material is crafted from high-quality beryllium copper, plated with gold to enhance conductivity. Notably, the barrel material is brass, also plated with gold, providing excellent durability and electrical characteristics, critical for high-performance requirements.
-
Product
Step Probes (F733SP) F73316B1054G150SP
F73316B1054G150SP
-
The Step Probes (F733SP) F73316B1054G150SP are precision devices designed for reliable performance in demanding environments. Capable of operating under temperatures ranging from -45°C to +100°C, these probes are engineered for robust functionality. With a pitch of 4.00 mm (157 mil), they ensure precise measurements and optimal connectivity, essential for various electronic applications.
-
Product
Programmable Step Attenuator, DC to 26.5 GHz, 0 to 11 dB, 1 dB steps
84904K
Attenuator
The Keysight 84904K programmable step attenuator offers coaxial measurements to 26.5 GHz in a compact, rugged design. It offers repeatability of better than 0.03 dB, excellent life (greater than 5 million switching cycles per section) and attenuator range of 0 to 11 dB in 1-dB steps. This latest design evolution sets new standards for size and performance. High attenuation accuracy and low SWR are achieved through the use of miniature thin-film attenuation cards composed of high-stability tantalum nitride film of saphire substrate. Insertion loss is outstanding, with less than 2 dB of loss at 26.5 GHz. The compact size of the unit, 35% smaller than the Keysight 8495/7 (26.5 GHz) family, allows for easy integration into instruments and ATE systems.
-
Product
Production Test Stands for Electric Motors
-
Electric drives such as DC and EC motors are more and more extensively deployed in the automotive industry. At the same time there is an increasing requirement for a 100% analysis of motors for fault detection and error analysis as well as statistics on quality, without increasing production cycles times. The model-based Parameter Identification method (PI method) from imc allows testing to be performed under load, yet without an “explicit” separate load machine. Instead, the motor is loaded dynamically by exploiting its own inherent inertia. This allows motor parameters such as resistance, inductivity and friction to be determined within a few seconds. A mathematical model and its parameters reflect motor behaviour in its completeness and make it possible to monitor motor production based on limit values and trend statistics. The identified parameters of the model equation can then be used to calculate derived key performance indicators of the motor characteristic curve.
-
Product
Step Probes F73211B0048G150SP
1007336
-
The F732SP Step Probes are a precision component designed for robust testing applications, enhancing accuracy in electrical connections. With a pitch of 2.54 mm and capable of operating at temperatures ranging from -45°C to 100°C, these probes are engineered for versatility and durability in various environments. The step probes are part of the F73211B0048G150SP line, identified by order code 1007336, and offer superior contact integrity with a typical contact resistance of just 20 mOhm, accommodating a continuous current of up to 5 A without compromise.
-
Product
Step Probes (F732SP) F73211B0081G300SP
1000918
-
The Step Probes (F732SP) F73211B0081G300SP is designed for precision applications where robust performance under varying conditions is required. Engineered with a pitch of 2.54 mm (100 mil), this model is capable of operating across a temperature range of -45°C to +100°C. The Spring Probe features a preload of 60 cN and spring force of 300 cN, ensuring reliable contact under mechanical stress. With a nominal travel of 4 mm and maximum travel extending to 5 mm, it achieves a pointing accuracy of +/- 0.08 mm, making it an excellent choice for applications that require high precision and repeatability.
-
Product
Motor and Generator Testing
-
Megger loop testers offer both traditional measuring techniques and state of the art “non-RCD Tripping” technology.
-
Product
Step Probe (F732SP) F73211B0042G100SP
1139338
-
The Step Probes (F732SP) model F73211B0042G100SP offers meticulous precision and robust functionality, making it an essential component for specialized electronic testing and assembly applications. With a pitch of 2.54 mm (100 mils), these probes are engineered to operate effectively within extreme temperature variations ranging from -45°C to +100°C. This product seamlessly integrates into tight layouts and is ideal for improved contact reliability across diverse environments. Crafted from high-quality materials, including a beryllium copper plunger plated in gold, the Step Probes ensure excellent electrical characteristics while maintaining a durable design for longevity and performance.
-
Product
Step Probes (F732SP) F73216B0041G300SP
1000999
-
The Step Probes (F732SP) F73216B0041G300SP, part of the premium series designed for precision applications, showcases exceptional robustness and reliability. These probes are engineered to operate effectively within a temperature range of -45°C to +100°C, accommodating diverse environmental conditions. Each probe supports a continuous current of 5.00 A, ensuring dependable electrical performance, while maintaining a typical contact resistance of just 20 mOhm. This makes them ideal for demanding situations that require meticulous electrical connections.
-
Product
Step Probes F73716B0003G300SP
1015617
-
The Step Probes F73716B0003G300SP is engineered to meet various demanding applications, offering a robust design ideal for use in environments where precision and reliability are paramount. This specific product features a pitch of 4.00 mm (157 mils) and operates efficiently within a temperature range of -45°C to +100°C. The Step Probe's resilient construction is supported by high-quality materials, including a beryllium copper plunger with a gold plating, ensuring excellent conductivity and minimal wear. The brass barrel, also plated with gold, guarantees long-lasting durability while the spring is made from high-strength steel and plated with silver for added protection.
-
Product
USB/Ethernet Control Step Attenuator
-
Digital control attenuators with Ethernet or USB control
-
Product
Digital Roller Brake Tester for Cars and Vans up to 4.0 T Axle Load with 2 x 4 kW Drive Motors and Max. Track Width of 2,200mm
C_MBT C 4.0 W220 STOCK | VP 210165
-
Maschinenbau Haldenwang GmbH & Co. KG.
Digital roller brake tester for cars and vans up to 4.0 t axle load with 2 x 4 kW drive motors and a max. track width of 2,200 mm.Basic version - available ex stockincl. specific option package.Particularly suitable as stand-alone tester or as part of car reception and diagnostic test lanes.
-
Product
Step Probes (F732SP) F73211B0053G150SP
1010775
-
The Step Probes (F732SP) F73211B0053G150SP are precision instruments designed for accurate electrical connectivity in various applications. With a robust construction featuring a beryllium copper plunger plated in gold, these probes ensure minimal contact resistance, typically around 20 mOhm, which is vital for reliable electrical measurements. They function effectively across a temperature range of -45°C to +100°C, making them suitable for diverse environments. The sleek design with a projection height of 11.1 mm and a total length of 36.5 mm enhances usability and adaptability in intricate setups.
-
Product
Motor Test Bench For No Load Test
-
The testing equipment is extensively used in industries for testing of motors under no load conditions.
-
Product
Step Probes (F731SP) F73112B9008G110SP
1010720
-
The Step Probe F73112B9008G110SP (item number 1010720) is a Spring Contact Probe with a disc-shaped contact area for position and presence testing. On F73112B9008G110SP, electrical contact is established only at the intended penetration depth, making the Step Probe suitable for position and presence checks on connectors. F73112B9008G110SP is suited to contacts located in housings, recesses or difficult-to-access areas because its disc head makes contact only at a defined penetration depth. Key mechanical specifications include pitch 2.4 mm / 94 mil, step diameter 1.5 mm, pin diameter 0.65 mm, pin length 2.7 mm, spring force 110 cN, pointing accuracy ±0.08 mm. The electrical rating of F73112B9008G110SP combines 5 A continuous current with 25 mΩ typical contact resistance. The stepped contact geometry of F73112B9008G110SP makes electrical contact only in the intended installation position and can therefore help detect missing or incorrectly positioned terminals.
-
Product
Step Probes (F732SP) F73211B1092G150SP
1025276
-
The F73211B1092G150SP Step Probe is engineered to deliver exceptional precision and reliability in a variety of demanding applications. Specifically designed with a pitch of 2.54 mm, this probe operates effectively across a temperature range from -45°C to +100°C. With its robust construction and advanced material selections, including a spring steel mechanism and a beryllium copper plunger with gold plating, the probe guarantees superior performance even under challenging environmental conditions. The specification of a continuous current capacity of 5.0 A and a typical contact resistance of just 20 mΩ ensures it meets the rigorous standards required for high-stakes electrical testing.
-
Product
Motor Quality Control Test Systems
-
SKF Condition Monitoring Center
These rack-style motor quality control units are rugged, field-proven systems for testing stators and armatures in high-volume manufacturing environments. They combine the most common electrical tests into an efficient automated solution.
