Stepping Motor
A device that translates electrical pulses into precise mechanical movement. The output shaft may deliver rotary or linear motion. (www.seanet.com)
See Also: Electric Motor, Servomotor
-
Product
Signal Converters For Temperature Measurement In Direct Drive Motors
EIB 5000 series
-
*Reduced cabling*Overload protection for direct drive motors*Faster response behavior for excessive temperatures*Greater cost-effectiveness
-
Product
Motorized Test Stands
-
AMETEK Sensors, Test & Calibration
Our motorized test stands are optimized for production floor operation. They provide a constant test speed and require a force gauge to be integrated with the test stand.
-
Product
Step Probes F73211B1064G300SP1
1011046
-
Introducing the Step Probes (F732SP) F73211B1064G300SP1, a meticulously engineered solution designed for precision applications. With an exceptional pitch of 2.54 mm, these probes ensure reliable connectivity across various temperature ranges from -45°C to +100°C. Their critical features include a continuous current capacity of 5.00 A and a typical contact resistance of just 20.00 mOhm, making them ideal for high-performance environments where accuracy is paramount. The F73211B1064G300SP1 is not just about functionality; it's about delivering consistent and precise operational parameters to enhance your technical projects.
-
Product
Step Probes (F733SP) F73311B1027G150SP1
1008980
-
Introducing the Step Probes (F733SP), designated as item number 1008980, a precision tool designed for high-performance applications. The F733SP model boasts a remarkable pitch of 4.00 mm (157 mil), making it suitable for environments that demand accurate measurements across a temperature range from -45°C to +100°C. This tool is engineered to deliver reliability and accuracy, equipped with an additional definition labeled SP1 that enhances its functionality.
-
Product
PXI Switchable-Input Programmable Step Attenuator Module, DC to 50 GHz
M9169E
Attenuator
The M9169E is a 3-port PXI programmable step attenuator module with a switchable path for a calibrator signal (cal input) into the input of a signal analyzer to improve amplitude accuracy. The M9169E has 0.03 dB insertion loss repeatability throughout the operating life of up to 5 million cycles per section. Its excellent attenuation accuracy across a wide operating temperature range ensures precise measurements.
-
Product
Linear Vibration Motor Aging Unit
BK2019A
-
The BK2019A Linear Vibration Motor Aging Test System was designed to test your linear vibration motors for long term reliability. It can test 20 DUT’s at one time and you can stack them easily so you can test hundreds of DUT’s simultaneously in a small space. This is a great machine to ensure your product will do its job for it's expected life.
-
Product
Stepper Motor Controller for CompactPCI
CPCI321
-
The CPCI321 Intelligent Stepper Motor Controller with amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead.
-
Product
Step Probes F73211B1007G150SP
1006398
-
The F73211B1007G150SP Step Probes are engineered to meet strict performance requirements, ideal for precision applications in electronic testing. With a unique pitch of 2.54 mm and the ability to operate within a temperature range from -45°C to +100°C, these probes excel in diverse environments, ensuring reliability in even the most demanding conditions.
-
Product
Step Probe F73311B1056G150SP1
F73311B1056G150SP1
-
For contact points inside housings and recesses, F73311B1056G150SP1 (item number 1010514) uses a flat plate head at a defined penetration depth. On F73311B1056G150SP1, electrical contact is established only at the intended penetration depth, making the Step Probe suitable for position and presence checks on connectors. Contact geometry is characterized by pin diameter 1.4 mm, plate diameter 3.5 mm, pin length 8 mm. On F73311B1056G150SP1, a pitch of 4 mm / 157 mil is combined with 150 cN spring force and 4 mm nominal travel. For F73311B1056G150SP1, the specified continuous current is 10 A. The plunger in F73311B1056G150SP1 is made of beryllium copper and is gold-plated.
-
Product
Motor Stator Tester
DZ901
-
Shanghai Aoboor Electric Co., Ltd.
Applicable to precision electrical properties test of stators of y-type three-ohase motors, single-phase motors, hub generators, brushless motors and servo motors.
-
Product
Hall Motor Tester
-
Shanghai Aoboor Electric Co., Ltd.
Applicable to no-load test and any DC motor with internal hall elements.
-
Product
Multi-Channel Attenuation Control Unit (4-channels), DC to 18 GHz, 0 to 121 dB, 1 dB Step
J7204B
Attenuator
The J7204B is a multi-channel (4-channels) attenuation solution for signal attenuation and conditioning of up to 4 devices under test (DUT). Operating frequency from DC to 18 GHz, with 121 dB, 1 dB steps. Exceptional 0.03 dB insertion loss repeatability per section for the entire 5 million cycles and excellent attenuation accuracy and flatness, the J7204B reduces cost of ownership and provide the best measurement accuracy.
-
Product
Step Probes (F733SP) F73316B1036G150SP1
1009014
-
The Step Probes (F733SP) F73316B1036G150SP1 are precision engineered to deliver superior performance across a range of demanding applications. Featuring a pitch size of 4.00 mm (157 mil), these probes can operate efficiently in extreme temperatures ranging from -45°C to +100°C. The design is optimized for durability and accuracy, making them suitable for high-quality contact and measurement tasks in various technical environments.
-
-
Product
Digital Roller Brake Tester for Cars and Vans up to 3.5 T Axle Load with 2 x 3 kW Drive Motors and Max. Track Width of 2,500mm
C_MBT C 3.5 W250 | VP 210153
-
Maschinenbau Haldenwang GmbH & Co. KG.
Digital roller brake tester for cars and vans up to 3.5 t axle load with 2 x 3 kW drive motors and a max. track width of 2,500 mm.Particularly suitable as stand-alone tester or as part of car reception and diagnostic test lanes for larger vehicles such as SUVs, off-roaders or vans.
-
Product
Digital Roller Brake Tester for Cars and Vans up to 4.0 T Axle Load with 2 x 4 kW Drive Motors and Max. Track Width of 2,200mm
C_MBT C 4.0 W220 | VP 210156
-
Maschinenbau Haldenwang GmbH & Co. KG.
Digital roller brake tester for cars and Vans up to 4.0 t axle load with 2 x 4 kW drive motors and a max. track width of 2,200 mm.Particularly suitable as stand-alone tester or as part of car reception and diagnostic test lanes with high vehicle throughput and increased loads.
-
Product
Step Probes (F731SP) F73116B0006G150SP
1008862
-
The Step Probes (F731SP) F73116B0006G150SP are meticulously crafted for precision and reliability in various applications requiring pin probing technology. Designed for harsh environments, these probes operate effectively in a temperature range of -45°C to +100°C, ensuring adaptability across a multitude of conditions. The F731SP features a pitch of 2.40 mm and a nominal travel capability of 3.50 mm, designed to provide accurate readings with a pointing accuracy of ±0.08 mm.With robust mechanical specifications, these probes exhibit a preload of 50 cN and a spring force of 150 cN, which contribute to their excellent performance under continuous current conditions of up to 5 A. The construction materials further enhance durability: the plunger is made from beryllium copper with gold plating, while the barrel is brass, also plated with gold for better conductivity. This product represents a blend of innovation and technical excellence, making it an ideal choice for professionals in need of reliable and precise measuring instruments.
-
Product
Development Test for Electric Motors with Power Electronics
-
Test bench for electric machines and inverters in hybrid applications*Control of mechanical parameters*Verification of electrical properties*Checking the LL characteristics*Short circuit measurement*Recording the performance process*Noise measurement*Temperature measurement
-
Product
Motor Armature Tester
DS920
-
Shanghai Aoboor Electric Co., Ltd.
Applicable to electrical properties test of motor armature with any number of commutator bars, for example, automotive motors, motorcycle starter motors ect.
-
Product
Step Probes (F732SP) F73211B1091G150SP
1024763
-
The Step Probes (F732SP) F73211B1091G150SP are expertly designed to meet rigorous electrical and mechanical requirements in various applications. These probes offer a precise pitch of 2.54 mm and operate effectively within a temperature range of -45°C to +100°C. Each probe is engineered to handle continuous current ratings up to 5.00 A while maintaining a minimal typical contact resistance of just 20.00 mOhm. This combination ensures reliable electrical connectivity and performance in demanding operational conditions.In terms of mechanical capabilities, the Step Probes are equipped with a preload of 70 cN and a spring force of 150 cN, allowing for a nominal travel of 4 mm and maximum travel of 5 mm. Additionally, with a pointing accuracy of +/- 0.08 mm, these probes enable precise measurements and repeatability. The overall dimensions of the probes are finely crafted to enhance usability, with a total length of 38.70 mm and various diameters tailored for optimal performance, ensuring they fit seamlessly into a wide range of applications.
-
Product
Linear Servo Motors And Drive Solutions
-
Linear drives and motors for high-speed and high-cycle operations, delivering unparalleled accuracy and performance benefits.
-
Product
Step Probes (F732SP) F73216B0093G300SP
1030599
-
The Step Probes (F732SP) F73216B0093G300SP are expertly designed for precision and reliability in a variety of applications. With a pitch of 2.54 mm (100 mil), these probes are suitable for high-density circuit board testing and offer a wide operating temperature range from -45°C to +100°C. This ensures they perform excellently in different environmental conditions, making them an essential accessory for demanding electronic testing environments.
-
Product
Step & Touch & Earth Impedance
-
The kit applyed with STS 5000, STS 4000 or eKAM, allows to perform the following types of test: soil resistivity, ground grid resistance, step and touch tests and overhead lines zero sequence and mutual coupling coefficients
-
Product
Motor Protection
-
Schweitzer Engineering Laboratories, Inc.
Motor protection products and systems provide complete protection for all types of motor faults. They are suited for use in industrial- and commercial-scale facilities.
-
Product
Step Probes (F731SP) F73111B0007G150SP
1009912
-
The Step Probe F73111B0007G150SP (item number 1009912) is a Spring Contact Probe with a disc-shaped contact area for position and presence testing. On F73111B0007G150SP, electrical contact is established only at the intended penetration depth, making the Step Probe suitable for position and presence checks on connectors. F73111B0007G150SP is suited to contacts located in housings, recesses or difficult-to-access areas because its disc head makes contact only at a defined penetration depth. Key mechanical specifications include pitch 2.4 mm / 94 mil, step diameter 1.5 mm, pin diameter 0.65 mm, pin length 3.4 mm, spring force 150 cN, pointing accuracy ±0.08 mm. F73111B0007G150SP is rated for 5 A continuous current with a typical contact resistance of 30 mΩ. The stepped contact geometry of F73111B0007G150SP makes electrical contact only in the intended installation position and can therefore help detect missing or incorrectly positioned terminals.
-
Product
Highly Dynamic XY Linear Motor Scanning Stage
L-731
-
Physik Instrumente GmbH & Co. KG
The magnetic linear direct drive is designed to provide high velocity and acceleration for inspection and microscopy. With a travel range of 205 mm square and solid velocity to 100 mm/sec, the L-731 is equipped to deliver high accuracy and smooth motion. Precision crossed roller bearings with anti-creep cage assist enable superior guiding accuracy (1.5 m straightness for loads up to 20 kg). An integrated optical reference encoder and limit switch provide further positioning control and accuracy for this compact stage with 5 nm resolution. DC servo motor versions are available on request.
-
Product
Step Probes (F731SP) F73111B1009G150SP
1010716
-
The Step Probes (F731SP) F73111B1009G150SP deliver exceptional precision and reliability, making them an essential tool for various applications. This product, identified by order code 1010716, features a design pitch of 2.40 mm, allowing for effective performance in a temperature range from -45°C to +100°C. The combination of high-quality beryllium copper with gold plating for the plunger ensures excellent conductive properties, while the brass barrel, also plated in gold, adds durability and resistance to corrosion.
-
Product
Motor Driven Actuator
NJ-SERVO Series
-
The NJ-SERVO electric motor driven actuator utilizes an electric motor drive system. High accuracy test control is enabled by a special servo motor and stroke displacement measurement sensor. In addition, the system configuration is simpler in comparison to hydraulic actuators, so it is easy to maintain, and achieves power savings and space savings. This system accommodates a wide range of tests with a high degree of expandability. This includes everything from endurance evaluations of the main body and assemblies of automobiles, aircrafts, and other transportation equipment to endurance evaluations of stand-alone parts; from multi-axis tests combining multiple actuators to uniaxial tests; and from sine waves to working waveform simulation tests.
-
Product
Step Probe F73211B0043G150SP
1006901
-
Introducing the F73211B0043G150SP, a top-of-the-line Step Probe designed for precision applications. This model, also known as F732SP, is engineered to operate effectively within a temperature range of -45°C to +100°C, making it ideal for challenging environments. With a unique pitch of 2.54 mm, each probe boasts outstanding characteristics that are crucial for high-performance testing and measurement tasks.
-
Product
Step Probes (F733SP) F73316B1001G150SP
1006285
-
The Step Probes (F733SP) F73316B1001G150SP represent a critical advancement in precision measurement technology. Designed for operational temperatures ranging from -45°C to +100°C, these probes are ideal for a variety of industrial applications. With a pitch of 4.00 mm (157 mil), they ensure precise placement in high-performance scenarios. Their robust construction and elegant engineering make them a preferred choice for applications requiring accuracy and reliability in challenging environments.
