Product

Fault Finder for Electrical Wiring Open / Short Circuit

FF310

-

General Technologies Corp.

FF310 - General Technologies Corp.

42 V Ready: for use in the new generation of vehicles with mixed or single 42 Volt systems. Operates on DC voltages from 6 to 42 volts. Internally protected against power surges and overloads. 8" flexible probe allows reaching wires in congested places. Transmitter and Receiver LEDs show open or short circuit conditions.

Product

Glow Wire Test Apparatus

-

SCR ELEKTRONIKS PVT. LTD.

SCR ELEKTRONIKS PVT. LTD.

GLOW WIRE TESTER (also known as Glow Wire Test Apparatus) is designed to carry out fire hazard testing as specified in IEC 60695-2-10 2000-10. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. This test is also referred in many other standards such as IS 11000, IS 3854 : 1997 / IS 1293 :1988 / IS 371 :1999 & IS 11000 Pt 2 Sec 1, IEC 60335, IEC 884/94, IEC 60598, IEC 61058, BS 6458, BS EN 60695–2-10,11,12, etc.

Product

15' Cable, 78-Pin Male Connector On One End, Loose Wired (Numbered) Other End

GT97112

-

Marvin Test Solutions, Inc.

GT97112 - Marvin Test Solutions, Inc.

15' harness, 78-pin male D-sub connector on one end, loose wired (numbered) other end.

Product

Wire/ Wireless Communication

-

Advantech Co. Ltd.

Advantech Co. Ltd.

Wire/ Wireless Communication iDoor series focuses on Ethernet, WiFi/Bluetooth, GSM/GPRS and 4G/LTE solutions for data exchange in IOT applications.

Product

Gauge Type T Thermocouple Wire

W-TW-44TEF

-

Physitemp Instruments

W-TW-44TEF - Physitemp Instruments

Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.

Product

PDS Wire Crane Monitoring System

-

Teledyne Marine PDS

Teledyne Marine PDS

It shows a real time overview of the wire crane in navigation, profile, and 3D views; displaying the clamshell, pontoon/vessel, design depths and color-coded digital terrain model (DTM). The navigation view highlights the high and low spots and is updated in real time, registering the progress of the dredging work. The registration follows the shape of the clamshell, bucket or orange peel bucket and is visible immediately in all views. The system also shows the open/close status of the dredge tool. Up/down indicators show the operator the exact distance to the seafloor and design depth continuously. 3D design models allow the use of complex designs.

Product

Wire Harness Tester

NX Solo

-

Dynalab Test Systems, Inc.

NX Solo - Dynalab Test Systems, Inc.

The Dynalab NX Solo Tester is an economical, feature-rich, stand-alone wire harness tester offering up to 256 test points. The powerful NX Editor software application is used to create unique program files to successfully validate all electrical and electro-mechanical wire harness parameters. This tester is compatible with all Dynalab NX accessories such as printers, scanners, control ports, and much more. The NX Solo Tester supports network communications with the NX Server for efficient file transfers and advanced data collection.

Product

Measuring Microscopes, Image Processing + Drawing Die And Wire Measurement

Easy Low Cost Wire Drawing Die Measuring Microscope

-

Optik Elektronik Gerätetechnik GmbH

Easy Low Cost Wire Drawing Die Measuring Microscope - Optik Elektronik Gerätetechnik GmbH

Simple optical measuring system for diameter and ovality of wire drawing dies with image processing software.

Product

Minigrabber® Test Clip For Max. .090" Wire Dia, Do-It-Yourself

3925

-

Pomona Electronics

3925 - Pomona Electronics

Minigrabber? test clip for max. .090" wire dia, Do-It-Yourself, available in ten colors

Product

3'Harness, 50-Pin Male D-sub Connector on one end, loose wired (numbered) other end

GT97107

-

Marvin Test Solutions, Inc.

GT97107 - Marvin Test Solutions, Inc.

3' harness, 50-pin male D-sub connector on one end, loose wired (numbered) other end.

Product

Custom Wiring Harnesses and Cables

-

WinSoft Inc.

WinSoft Inc.

From flight critical aerospace wiring harnesses to discrete wire assemblies, WinSoft can meet your toughest requirements. Each of our finished cable assemblies and wire harnesses is built to the customer exact specifications and is 100% quality tested. Cable and harness assemblies are certified to meet all customer requirements and applicable industry standards while manufactured to strict ISO processes and procedures.

Product

Wire & Cable Testers

-

Precision Mastech Enterprises Co.

Precision Mastech Enterprises Co.

Diagnostic tools designed to verify electrical connectivity, map wiring configurations, and detect faults.

Product

LAN and telephone wiring testers

-

PROMAX Electronica

PROMAX Electronica

Measurement and analysis instruments for the deployment of telephony networks, Ethernet, and generally telecommunications networks via copper cable.

Product

Mating Coax Connector With 20 Coax Pins Crimped (One End) To 5 Foot Wires

GX96404-60

-

Marvin Test Solutions, Inc.

GX96404-60 - Marvin Test Solutions, Inc.

Mating Coax Connector with 20 Coax Pins crimped (one end) to 5' wires. Coaxial cable: RG316, 50 ohms.

Product

Hipot Wire Harness Testers

NX Hipot

-

Dynalab Test Systems, Inc.

NX Hipot - Dynalab Test Systems, Inc.

* 50 to 1500VDC Hipot Testing* 50 to 1000VAC (optional) * 5Mohm to 1Gohm Insulation Resistance * Simple 4-button user interface * Tests for continuity and shorts * Tests a variety of components * Precision resistance measurements * Continuous high speed scanning for real time complete status information of harness assembly progress * Keyed security access and control * Built for rough industrial environments * 2 serial ports for connection to printers and scanners * Standalone operation * Uses a high capacity memory card * Available from 64 to 1024 test points * Networkable

Product

Wire Crimp Pull Sensor

Model MR06-200

-

Mark-10 Corp.

Model MR06-200 - Mark-10 Corp.

The MR06-200 wire crimp pull sensor is a hand-operated solution for measuring wire crimp pull-off forces. The ergonomic handles and convenient tensioning mechanism make field measurements a breeze for applications up to 200 lbF (1,000 N). Squeeze the handles together to increase tension on the sample until a break occurs. The peak force is recorded by a Mark-10 indicator. A rotating turret with slots of multiple sizes accommodates a wide range of wire diameters, up to 0.25 in. (6.4 mm).

Product

Test Lead Holder For Wires Up To 0.320In (8.13mm) Dia

4408

-

Pomona Electronics

4408 - Pomona Electronics

Test Lead Holder for Wires Up to 0.320in (8.13mm) Dia

Product

Auto Wire Integrated Tester Series

LX-1024A+

-

Shenzhen Lian Xin Technology Co., Ltd.

LX-1024A+ - Shenzhen Lian Xin Technology Co., Ltd.

The system provides Chinese/English free switch operation interface,．·Up to 1500Vdc/1000Vac Test Voltage ,．·1024 Max. Test Points ,(Max of all series)．·500 Max Files Memory,support USB or PC unlimited expansion,．·Using Embedded Linux operating system，．·Adopted high resolution colour 640*480 TFT LCD ,．·Large 320×240 LCD display ,．·Instant test time :0-60s , optional adjustment.．·Providing Single-End ,Multi-segment ,Standard ,and Spot test of wire.．·Auto Scan and Auto Pin Search ,．·The system provides advanced instant open-circuit, short-circuit, continuity test,．·Intermittent Conductance Test,．·Intermittent Open/Short Test ,

Product

Automatic Tracker Targets

-

Automated Precision Inc.

Automated Precision Inc.

Maximize laser tracker productivity with automated tracker sensors.

Product

One Wire Communication Board

MS 1727

-

Meltronics Systemtech

MS 1727 - Meltronics Systemtech

- Digital serial bus communication with low speed data over a single line, Both signaling and driving power over a same single signal.- Protocol used in small inexpensive devices. Such as digital thermometer, weather instruments, laptop sub module, authenticate system and some cell phone battery packs.- Always master only initiates the communication and in overall in charge of the network.- Bus communicates with master and slave at a low data rate of 12kbps.- All terminals in the network are communicating by half-duplex mode.- Maximum of 255 nodes in each 1-wire network- Each data transaction will start with 480micro second low RESET pulse.

Product

Corona Resistant Tester of Enamelled Wire

DPT-1000S

-

Shanghai Dean Electrical Co., Ltd

DPT-1000S - Shanghai Dean Electrical Co., Ltd

·The tester is comply with the requirements of standards GB/T 1707-2008, GB/T 24122-2009, GB14711-2013, meet the requirement of standard JB/T 10930-2010;·Multiple samples can be tested at same time;·Used for testing the feature of high frequency pulse resistance (performance of Corona-resistance).