Product

Isolation Pulse Transmitter

PA-330Z

-

Ono Sokki

PA-330Z - Ono Sokki

The PA-330Z receives the square wave signals from the rotary encoder, and converts it to low impedance signals suitable for long distance transmission after wave-shaping and amplifying via photo couplers which provide isolation between input and output.A 12VDC external power supply is provided for use with the DC powered RP series encoder.The case is sealed construction which allows closely mounting to the encoder.

Product

Vibration Isolation Tables

-

Probing Solutions, Inc.

Probing Solutions, Inc.

Probing Solutions offers Vibration isolation tables made by Kinetics and TMC. To order a table, please call PSI at (775) 246-0999, or email sales@probingsolutions.com for a quote.

Product

High Isolation Switches

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

High Isolation Switches by Pasternack

Product

Isolation Relays

-

TransData, Inc.

TransData, Inc.

TransData Isolation Relays provide surge protection for energy metering installations by electrically isolating the pulse input/output wiring path to protect electricity meters, network components, energy management systems and recording devices from damage caused by transmitted or induced electrical surges.

Product

Shunt Isolation Amplifier

-

Knick Elektronische Messgeräte GmbH & Co. KG.

Knick Elektronische Messgeräte GmbH & Co. KG.

Especially to accurately measure large DC currents via shunt resistors, ie for making isolated detection of mV voltage on shunts. Variants with calibrated range selection. Working voltage up to 3600 V AC / DC.

Product

Isolation Amplifier Analog Output

-

Renesas Electronics Corp.

Renesas Electronics Corp.

This coupler is an optically coupled isolation amplifier that uses an IC with a high-accuracy sigma-delta A/D converter and a GaAIAs light-emitting diode with high-speed response and high luminance efficiency on the input side, and an IC with a high-accuracy D/A converter on the output side. This coupler is designed specifically for high common mode transient immunity (CMTI) and high linearity (nonlinearity) applications, making it ideal for current sensing in motor drives.

Product

Isolation Amplifiers

-

Analog Devices Inc.

Analog Devices Inc.

Isolation Amplifiers provide power supply designers with a higher performing, single chip alternative to isolation techniques based on optocouplers and shunt regulators. Analog Devices ADuM3190 and ADuM4190 isolated error amplifiers have a 400 kHz bandwidth, with 0.5% typical initial accuracy at 25°C and 1% total accuracy over the extended temperature range of –40˚C to +125˚C. This provides manufacturers of ac-to-dc and dc-to-dc power supplies with a significant upgrade in speed and operating temperature range, as well as a 5× improvement in transient response.

Product

TAP Signal Isolation Module

JT 2139

-

JTAG Technologies Inc.

JT 2139 - JTAG Technologies Inc.

The JT 2139 is a TAP signal isolation module designed for use in combinational test systems that utilise multiple instrument interfaces. To avoid parasitic capacitance effects and/or unwanted ground loops the JT 2139 can be used to completely galvanically isolate any JTAG Technologies boundary-scan controller from the remainder of the instrumentation system. JT 2139 isolators are a standard component of the JTAG Technologies ‘Symphony’ systems that integrate boundary-scan with In-Circuits Testers etc..

Product

Isolation Transformers

-

Osborne Transformer Corp.

Osborne Transformer Corp.

Osborne’s Isolation Transformers are used to step-up, step-down and isolate voltages in single phase circuits. Isolation may be used to provide output circuit immunity from voltage spikes and noise (both common-mode and transverse-mode) present on the input system. The isolation can allow separate grounds on both the input and output sides of the transformer. Osborne also designs with a range of electrostatic shielding to provide several levels of noise immunity.

Product

PXI RS232 Interface Galvanic Isolation

PXI‑8432/4 - OTP2-Modul-Nr196

-

LXinstruments GmbH

PXI‑8432/4 - OTP2-Modul-Nr196 - LXinstruments GmbH

The PXI‑8432/4 module is a high-performance, dielectric-proof interface for high-speed communication with RS-232 devices. The module offers data transfers via the high-speed DMA interface, multithreading and multiprocessor support. NI serial ports appear as standard COM ports for compatibility with programs that use serial communications.

Product

JTAG Isolation Protection

-

Blackhawk

Blackhawk

Our line of JTAG isolators help protect your investment in computers, development boards, debug probes, and lab equipment. Each model connects easily between your target board and debug probe.

Product

Isolation Transformers 230V

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

Due to the high safety requirements in service workshops, schools and industry, an isolating transformer is an absolute prerequisite for carrying out professional repair work. Galvanic isolation between primary and secondary voltage during measurements and repairs on open devices guarantees a high safety standard for the user. Of course, galvanic isolation from the mains voltage also offers other advantages in electronics development, audio technology and many other areas.

Product

Ultra-Low Frequency Spring Activated Vibration Isolation Workstation

MK26 Series

-

Kinetic Systems, Inc.

MK26 Series - Kinetic Systems, Inc.

The New MK26 Series Vibration Control Workstation with more ergonomic comfort is designed specifically for ultra-low natural frequency applications. Kinetic Systems manufactures the system utilizing the Minus K patented negative stiffness vibration isolators in order to provide a compact, passive Vibration Isolation Workstation with ultra-low natural frequencies, higher internal structural frequencies, and excellent vertical and horizontal isolation efficiencies.  The MK26 has also been upgraded to provide much better user comfort and additional leg space.

Product

RS422 Mode SI-module With Optical Isolation And RTS/CTS

MX422-PEP

-

TEAM SOLUTIONS, INC.

MX422-PEP - TEAM SOLUTIONS, INC.

RS422 mode SI-module with optical isolation and RTS/CTS

Product

RF Shielded Enclosure, 80dB Isolation Testing

QuietBox-80c/r

-

Raymond RF Measurements Corp.

QuietBox-80c/r - Raymond RF Measurements Corp.

The Raymond RF QuietBox-80c/r line of all-aluminum tabletop and rack mountable RF Shielded Cabinets offers effective RF isolation in a lightweight, fully-customizable package. Each QuietBox 80c/r is designed from the ground up to satisfy all the requirements of the client including enclosure dimensions, door swing and mounting style (tabletop or rack mount).

Product

Parallel NTDS Isolation Tap Box

-

IXI Technology

IXI Technology

IXI’S NTDS parallel isolation tap box is the ideal solution for relibility tapping NTDS parallel type A, B, C, and H interfaces. It connects easily to existing cables forming a tee connection that can be used for data monitoring and acquisition over long distances without interference with your system.

Product

RF Test Enclosure, ≥100 DB Of Isolation, 300 MHz - 18 GHz

dbSAFE DUO

-

DVTest Inc.

dbSAFE DUO - DVTest Inc.

RF enclosures are now a necessity for testing wireless devices. The dbSAFE DUO offers unmatched isolation in its class; up to 100 dB* from 300 MHz to 18 GHz. The dbSAFE DUO shielded box has been engineered from the ground up to provide superior RF isolation and performance while being cost-effective. The dbSAFE DUO can be designed and manufactured to almost any size and dimensions.

Product

Isolation Adapter

-

Blackhawk

Blackhawk

For harsh environments and motor control applications where debug tools may be exposed to high voltage or ground loop potentials, Blackhawk offers two product models of galvanic isolation.

Product

BenchMate with Horizontal Isolation

2214 Series

-

Kinetic Systems, Inc.

2214 Series - Kinetic Systems, Inc.

BenchMate Vibration-Free Platforms enhance the performance of precision tabletop equipment.The 2214 Series is very similar to the 2212, however it has the added benefit of multistage horizontal isolation. It is recommended in applications where horizontal vibrations are a problem.

Product

Interface and Isolation

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices offers a wide range of digital interface and digital isolators with iCoupler® technology covering the industry’s field bus and peripheral communications standards. Digital isolators, isolated transceivers, isolated A/D converters and isolated gate drivers utilize the award winning iCoupler® and isoPower® technologies for isolation solutions without many of the constraints found in optocouplers. Find design solutions for interface devices including keypad controllers, level translators, and high voltage protection products (channel protection, fault protection, overvoltage protection), and latch-up proof switches and multiplexers.

Product

Baratron® Isolation Systems

-

MKS Instruments

MKS Instruments

These Isolation Systems are designed to automatically maintain a heated Baratron® capacitance manometer at vacuum throughout a process cycle. Maintaining a heated Baratron® capacitance manometer at vacuum is one of the most important ways to optimize its accuracy and repeatability in production systems, making this product especially well-suited for fast-cycling industrial and semiconductor manufacturing processes.

Product

Isolation Amplifier Digital Output

-

Renesas Electronics Corp.

Renesas Electronics Corp.

This coupler is an optically coupled isolation amplifier that uses an IC with a high-accuracy sigma-delta A/D converter and a GaAIAs light-emitting diode with high-speed response and high luminance efficiency on the input side, and an IC with a digital signal (MDAT, MCLK) output function on the output side. This coupler is designed specifically for high common mode transient immunity (CMTI) and high linearity (nonlinearity) applications, making it ideal for current sensing in motor drives.