Torque
turning force.
See Also: Torque Sensors, Torque Testers, Torque Transducers, Torque Meters, Dynamometers
-
Product
07R THT Horizontal | Without Bezel
07R0-xx
-
Miniatur selector without bezel, PCB mounting and up to 3.5 Ncm switching torque
-
Product
E33 THT Vertical | Threaded | Up To 3 Ncm
E33-VTx1/4/8/9/A/B/C/D
-
Encoder with a fastening torque of nut M7 x 0.75, 32 detent positions, with or without push function, switching torque up to 3 Ncm and a rotational life up to 1 Mio revolutions
-
Product
Synchro/Resolver Boosters
-
NAI offers a variety of multi-channel Synchro/Resolver Boosters that accept Synchro/Resolver inputs, and they deliver isolated outputs capable of driving passive and active loads such as Control Transformers or Torque Receivers. These amplifiers can be used stand-alone or in conjunction with Digital-to-Synchro/Resolver Converters.
-
Product
Dynamometer
-
Dynamometers, force and torque transducers available in many models. Buy your dynamometer or force measurment products from Vetek!The difference between a load cell and a dynamometer is that the dynamometer is optimated for fast measurement.
-
Product
2WD Dynamometers
MD-150 Series
-
With ultra-low inertia and a powerful 625-hp PAU, the MD-150 is a perfect combination of power and finesse – capable of handling most sport compact applications with ease. The 1200-hp measurement capacity means you’ll have no problem pulling horsepower sweeps with this low-profile dyno. The MD-150 is best suited for real-time, steady state tuning of stand-alone engine management systems such as Autronic, MoTeC, Accel DFI, F.A.S.T., AEM, Haltech and the like. From a dynamometer stand-point, the main focus of real-time programming is dynamometer sensitivity, resolution, and set-point stability. The MD-150’s ultra-low inertia design and high speed controller maximize the user’s experience by minimizing controller “wondering” and enhancing system control – simply dial in a speed and let the MD-150 take over. Add timing and watch torque increase right on the dynamometer screen in real-time until you have optimized engine timing and fuel mixture.
-
Product
Force Measurement & Torque Measurement Test Stands
-
Mark-10 offers the industry's most extensive line of manual force measurement and torque measurement test stands. Test stands are useful in eliminating variability inherent in hand testing and can help to automate test processes. A wide range of capacities, loading methods, and configurations are available. A test stand is an integral part of a testing system, typically also comprising a force gauge or torque gauge, grips, software, and accessories.
-
Product
Torque Tester
DI-4B-25
-
For daily inspection of small impact tools. Since the display uses an LED, the numbers can be read clearly even in dark places
-
Product
Angle Encoder Modules
-
Optimally matched combinations of angle encoders and integrated high-precision bearings result in high measurement and bearing accuracies, very high resolutions, and exceptionally high repeatability. These encoders also feature easy installation and a compact, low-profile design, not to mention low starting torques for smooth motion.
-
Product
Non Contact Flange Torque Transducer
FF425
-
Contactless Torque Transducers with flange couplings at either end with measuring ranges from 0-100Nm up to 30kNm as standard (bespoke sensors up to 16MNm) for a variety of in line static and rotary torque measurement applications.The Datum Electronics Series FF425 non contact flange torque sensor and FF410 torque sensors have been designed to fit easily inline with any drive train or test rig using standard DIN size couplings. With Flange couplings at either end of the torque transducer, it has many advantages over other torque measurement systems on the market.
-
Product
Agricultural PTO Dynamometers
-
An agricultural PTO dynamometer measures PTO power output. Power, torque, and RPM can be controlled and measured without reliance on water.
-
Product
Preset Torque Limiters
-
For companies with minor torque control needs, Mountz torque limiters provide the value of a set of torque tools for a fraction of the cost. Mounted in-line on a regular hand tool, torque limiters use a rotary clutch mechanism that lets operators accurately control torque output. Adding torque control capabilities to your toolbox will improve the quality of your results and lower the risk of faulty repairs. Durable, dependable, and versatile, Mountz torque limiters allow you to complete tough, technical service jobs with the knowledge that you have the right tools to get it done.
-
Product
Fluid Power Actuators
RH
-
Rack and pinion actuators often offer the most economical solution for quarter-turn valves that have a fairly constant torque requirement throughout the stroke.
-
Product
Run Down Adapters
Mini RDA
-
The mini RDA unit with fastener is designed for low torque sensors. Engineered to provide consistent and reliable torque readings for use with low torque power tools. The mini run down adapter is mounted in-line between the tool drive and torque sensor.
-
Product
Engine Dynamometer
DE200
-
Power: 268 hp (200 kW)Torque: 590 lb-ft (800 Nm)Speed: 8,000 rpmWater Use*: 37 gpm (140.1 lpm)Inertia Value: 8.28 lb·ft2 (0.349 kg·m2)Shipping Weight: 1,863 lb (845 kg)Rotation: bi-directional*No Cooling System
-
Product
Fluid Power Actuators
CP
-
CP range pneumatic actuators are a versatile, modular, scotch yoke design available in both double-acting and spring-return configurations. The compact and efficient design yields high torques even at low pressures. The design concepts found in Rotork's large, heavy-duty actuators has been applied to the CP range, which brings heavy-duty actuator qualities to small, quarter-turn actuators.
-
Product
Engine Dynamometer
DX33-HS
-
Power: 750 hp (559 kW)Torque: 2,413 lb-ft (3,271 Nm)Speed: 6,000 rpmWater Use*: 55 gpm (208.2 lpm)Inertia Value**: 62.4 lb·ft2 (2.6 kg·m2)Shipping Weight: 1,648 lb (748 kg)Rotation: bi-directional
-
Product
07R THT Vertical | Threaded | With Shaft
07R3-xx-20/30
-
Miniatur selector with shaft, PCB mounting and up to 3.5 Ncm switching torque
-
Product
Posi-Control System
-
The position control system consists of a torque arm equipped with an encoder and a posi-control device. The touch posi-control system is used for programming and it to track the movement of the position control torque arm.
-
Product
Limited Angle Torque Motors and Tachometers
-
CAES offers limited-angle torque motors in a wide variety of catalog sizes, with cog-free motion in a limited range.
-
Product
07PL THT Horizontal | With Push Button
07PL-Coded-Overview
-
Coded switch with push function, HEX or Gray coding, push force up to 14 N and up to 3.5 Ncm switching torque
-
Product
Engine Dynamometer
DE500
-
Power: 670 hp (500 kW)Torque: 2,213 lb-ft (3,000 Nm)Speed: 7,500 rpmWater Use*: 90 gpm (340.7 lpm)Inertia Value: 52 lb·ft2 (2.196 kg·m2)Shipping Weight: 4,740 lb (2,150 kg)Rotation: bi-directional*No Cooling System
-
Product
Load Cell Amplifier Signal Conditioner with DB9 Connectors
MODEL LCA-9PC
-
The LCA-9PC Module provides low-cost, dedicated signal conditioning for a single bridge type load cell or torque sensor. Model LCA-9PC comes with DB9 male and female connectors, which require soldering to user-furnished mating female or male wire connectors. On- board jumper selections include sensitivities from 0.5 mV/V to 10 mV/V, bandwidths from 100 Hz to 30 kHz, and amplified outputs of 0 to ±5V, 0 to ±10V, 0-16 mA, 0-20 mA or 4-20 mA. Zero and span adjustments are via precision 25-turn low-tempco metal film otentiometers.The units can be operated next to the sensor with 4-wire hookup or at distances up to 1 km (3300 feet) with 6-wire hookup. An onboard 87.325 kΩ resistor allows easy shunt calibration at the push of a button. Provision is also made for a user-furnished calibration resistor. Power requirements are 11.8 to 26V DC with load currents from 10 to 60 mA, the latter applying when the unit provides 10V DC excitation to a 350 ohm load cell and delivers a 20 mA analog output.
-
Product
E37 THT Vertical | Non-Threaded | Up To 4.5 Ncm
E37-VNxx2/3/5/6/8/9/E/F/G
-
Incremental encoder with dual function and without thread, 16 detent positions, switching torque up to 4.5 Ncm and a rotational life up to 1 Mio revolutions
-
Product
Strain Gauge Sensor
ZET 7010
-
Digital strain gauge ZET 7010 is designed for measuring relative deformation using primary transducers based on strain sensors. This can be strain-gauge transducers, torque sensors or separate strain-gauge transducers connected via bridge or half-bridge circuit.
-
Product
E33 SMT Vertical | Non-Threaded | Up To 4.5 Ncm
E33-SNx2/3/5/6/8/9/E/F/G
-
Encoder without thread, 16 detent positions, with or without push function, switching torque up to 4.5 Ncm and a rotational life up to 1 Mio revolutions
-
Product
Torque Sensors/Transducers
TorqSense
-
We offer a range of rotary torque sensors and torque transducers to suit a variety of industrial applications, our standard range of sensors can measure torque ranges from 10mNm up to 13000Nm. Please browse our product range below or use the torque selector to assist in finding a torque sensor to meet your specific requirements.
-
Product
Electric Servomotor Threaded Impact Tester
-
This equipment is a new type of impact test equipment that uses the uniquely developed servomotor with ultra-low inertia and high torque that is used in our vibration.
-
Product
Torsion Testers
-
For maximum torsion testing versatility and capability, Tinius Olsen offers a full range of torsion testing machines in capacities from 1,000 to 30,000 Nm. These uniquely superior torsion testers provide loading and weighing capabilities in both directions of rotation. This feature makes it possible to conveniently determine not only the ultimate torque load of a specimen, but how that specimen behaves under conditions of continuous or intermittent torque loading in both directions.
-
Product
NI-9237, 50 kS/s/channel, Bridge Analog Input, 4-Channel C Series Strain/Bridge Input Module
780264-01
Strain/Bridge Input Module
50 kS/s/channel, Bridge Analog Input, 4-Channel C Series Strain/Bridge Input Module - The NI‑9237 includes all the signal conditioning required to power and measure up to four bridge-based sensors simultaneously. The module provides strain or load measurements with zero interchannel phase delay. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high‑common‑mode noise rejection and increased safety. You can program the NI‑9237 for use with half-bridge and full-bridge sensors with built-in excitation. The four RJ50 jacks provide direct connectivity to most torque or load cells and offer custom cable solutions with minimal tools.
-
Product
E37 THT Vertical | Threaded | Up To 4.5 Ncm
E37-VTxx2/3/5/6/8/9/E/F/G
-
Incremental encoder with dual function, 16 detent positions, fastening torque of nut M7 x 0.75, switching torque up to 4.5 Ncm and a rotational life up to 1 Mio revolutions
