Torque
turning force.
See Also: Torque Sensors, Torque Testers, Torque Transducers, Torque Meters, Dynamometers
-
Product
EZ-Glider Position Control Torque Arms
-
Equipped with position encoders, the position control torque arm is an error-proofing system that detects and eliminates costly screw-fastening errors during the assembly process. The poka-yoke system reduces the risks of improperly fastening screws, ensuring that every screw is correctly tightened in the correct sequence. In critical applications, tightening fasteners in the correct sequence ensures the reliability of the joint. The position control system is like putting the eyes and ears of a quality control manager where they are needed most – right at each work station.
-
Product
Torque Screwdriver Sensor
SDX
-
SDX torque screwdriver sensor is an instrument designed for auditing or tightening fasteners to a specified torque when mated with a torque analyzer.
-
Product
Torque Tester
WDISR-IP series
-
Management of manual torque tools Built-in battery type. For managing various torque drivers and wrenches. Interlocking with a personal computer or PLC, the torque measurement can be managed at a higher level
-
Product
Dynamic Torque Sensing System
-
Advanced Telemetrics International
Are utilized in applications where conventional rotary torque transducers are not practical due to excessive shaft speeds, vibration, and dirty, oily environments.
-
Product
Rotational Friction Torque
-
Tests the smoothness of rotation and components of small precision motors, such as, gearbox, bearings, oil seals, etc. The motorized tester turns at a set rotational speed based upon the model. See the specifications table for more details. The tester can be used to measure torque in CW and CCW directions.
-
Product
Torque Meter for TQ-3507 High-Stiffness Torque Detector
TQ-5300
-
TQ-5300 Torque meter, used with the TQ-2000 series High-stiffness torque detector, can convert the pulse output of the detector to digital torque value and analog voltage output.
-
Product
Torque
-
Torque instruments are used to apply, measure, or control torque—the twisting force that causes an object (like a bolt or shaft) to rotate. Their main purpose is to ensure parts are tightened or tested accurately and safely, not too loose and not too tight.
-
Product
Torque Control System
HD-Series
-
The Mountz torque and automation control system is a revolutionary change in repeatable screw fastening technology. The patented HD-Series hybrid system is the world's first torque control tool using both air and electric power to set and control torque. The HD's precise pneumatic pressure sensor and patented algorithm allow for precision digital torque selection. It provides real-time monitoring and torque control of the tightening process. It provides repeatability of the torque applied to screws, regardless of joint characteristics and frictional differences in actual applications. Affordable, flexible system that can replace up to 8 conventional screwdrivers.
-
Product
Torque Detector for High Rigidity
DSTP Series
-
The DSTP series is designed as the large capacity type torque detector which is able to perform the torque measurement from standstill axis to a high speed rotation. Four types of large capacity products are available.
-
Product
Brushless Electric Torque Screwdrivers
BLG-Series
-
The HIOS BLG-Series is a brushless electric screwdriver designed for high production environments at an affordable price. Minimal heat build-up even when tool is operated continuously. Provides precision torque control with an automatic shut-off clutch once preset torque is achieved. Features a high performance brushless motor design that provides durability and reduces the standard maintenance costs of electric screwdrivers. With almost no expendable parts and simple design, the brushless screwdriver life cycle is extended and maintains a clean working environment.
-
Product
Torque Gauges
-
Mark-10 torque gauges and torque testers are accurate and feature-rich torque measurement products ideal for a wide range of torque applications. All torque gauges and torque testers capture the peak torque in both directions (CW and CCW) and have selectable units of torque measurement. Torque capacities are available from 10 ozFin full scale to 5,000 lbFin, depending on the torque gauge or torque tester. Units may be handheld or used with a test stand and gripping fixtures to create a complete torque testing solution. All torque gauges and torque testers carry the CE mark.
-
Product
Preset Torque Screwdrivers
FG
-
Engineered and assembled in the Silicon Valley, the Mountz FG line of preset precision torque screwdrivers are the most advanced hand tools in the world.
-
Product
Torque Speed Meter
VTS-01
-
VEER make Torque Speed Meter VTS-01 is portable instrument which is very useful to find Output Power, Torque in Kgm, RPM, Corrected RPM, %Slip and Frequency of Motor. It is very simple and easy to use. It measures torque of motor from load cell & RPM from Proximity Sensor which are very useful to find output power of Motor.
-
Product
C07A THT Horizontal | Threaded | With Shaft
C07A-1xxx-20/30xx
-
Compact coded switch with HEX, Gray or BCD coding, up to 16 position, up to 3.5 Ncm switching torque and perfect for rugged environments
-
Product
E37 THT Horizontal | Threaded | Up To 3 Ncm
E37-CTxx1/4/8/9/A/B/C/D
-
Incremental encoder with dual function, 32 detent positions, fastening torque of nut M7 x 0.75, switching torque up to 3 Ncm and a rotational life up to 1 Mio revolution
-
Product
Dial Wrenches
-
A dial torque wrench is an essential tool in torque measurement, as it provides quality control in regards to monitoring and verifying torque. This tool is commonly used to test, audit, and verify torque applied to joints. Using the memory pointer, the dial torque wrench will capture finishing torque that is applied to any fastener.
-
Product
Touch Posi-Control System V2
DPC
-
The position control torque arm system helps manufacturers detect and eliminate costly screw-fastening errors during the assembly process. This position control system is designed to reduce the risk of improperly fastened screws, ensuring that every screw is in the correctly tightened in the correct sequence. A good tightening sequence ensures that an even preload distribution is achieved in the joint. Using a position control system is like putting the eyes and ears of a quality control manager where they are needed most - right on the assembly area.
-
Product
07R THT Vertical | Without Bezel
07R2-xx
-
Miniatur selector without bezel, PCB mounting and up to 3.5 Ncm switching torque
-
Product
07R THT Horizontal | Non-Threaded | Without Shaft
07R0-xx-00
-
Miniatur selector without shaft, PCB mounting and up to 3.5 Ncm switching torque
-
Product
Plug And Socket Torque Test Machine
-
Shenzhen Chuangxin Instruments Co., Ltd.
Plug Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. Plug Torque Tester is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.
-
Product
E-DRIV® Electric Screwdrivers
E-Series
-
The electric screwdriver is for light duty tightening applications. The assembly tool plugs directly into a power outlet and does not require a separate power supply unit. Ensures accuracy in fastening with precision automatic shut-off clutch once preset torque is achieved. Operates on a duty cycle of 0.5 seconds on and 3.5 seconds off.
-
Product
Hysteresis Dynamometers
HD Series
-
16 Standard Models with Maximum Torque from 2.5 ozin to 500 lbin (18 mNm to 56.5 Nm)Hysteresis Braking System: Provides precise torque loading independent of shaft speedMotor Testing from No Load to Locked RotorAccuracy: 0.25% to 0.5% (Full Scale)Air Flow Sensor: For protection against overheating and operator errorStandard Torque Units: English, Metric and SIBase Plate: Available in long or short versionsCustom Dynamometers: for special torque and speed requirementsEasy Calibration
-
Product
Engine Dynamometer
DE80
-
Power: 107 hp (80 kW)Torque: 118 lb-ft (160 Nm)Speed: 14,000 rpmWater Use*: 15 gpm (56.8 lpm)Inertia Value: 0.65 lb·ft2 (0.0275 kg·m2)Shipping Weight: 1,213 lb (550 kg)Rotation: bi-directional*No Cooling System
-
Product
Reduced Voltage Motor Starting Panels by Auto-Transformers
-
Reduced Voltage Motor Starting Panels are designed for starting of squirrel cage induction and synchronous motors. A RVMS Panel reduces the torque by temporarily reducing the voltage and/or current input. It reduces voltage applied to the motor during start up causing lower starting currents from the connected grid.
-
Product
Eddy-Current Dynamometers
WB Series
-
Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as the speed increases, reaching peak torque at rated speed. The dynamometers have low inertia as a result of small rotor diameter. Brake cooling is provided by a water circulation system, which passes inside the stator to dissipate heat generated by the braking power. The water cooling in the WB provides high continuous power ratings (max. 140 kW). The WB dynamometers have accuracy ratings of 0.3% to 0.5% full scale ( 2% for WB 2.7), depending on size and system configuration. Additional options include: high-speed version, speed pickup, mechanical rotor blocking device, OEM version IS and vertical mounting.
-
Product
Break-Over Wrenches
-
Using break-over wrenches helps you support your quality control inspectors by empowering your workers to prevent assembly errors. Designed to accurately tighten diverse fasteners, break-over wrenches inform their operator when the right torque is reached by deflecting on their built-in hinge. As a result, you can reduce lost product or rework related to over- and under-torque conditions. Plus, their small size enables them to fit into areas with tight clearances. The end result is a boost in both productivity and project ROI. And with break-over wrenches, Mountz gives you the flexibility to switch out heads for tricky fasteners or to get more use out of your existing tools.
-
Product
Torque Transducers
-
Interface offers both reaction and rotary style torque transducers.Whether you need torque transducers for rotary torque, axial torsion or reaction torque, you don't have to be an expert in torque measurement, because we are. Talk to us about what sort of torque you need to measure, and under what conditions and constraints. We'll walk you through the specification process, quickly and efficiently, and if we don't have what you need on the shelf, we'll be happy to customize an existing product or build a new one from scratch to meet your exacting requirements.
-
Product
Engine Dynamometer
DL10K
-
Power: 10,000 hp (7,457 kW)Torque: 68,109 lb-ft (92,344 Nm)Speed: 2,550 rpmWater Use*: 727 gpm (2,752 lpm)Inertia Value**: 340 lb·ft2 (14.3 kg·m2)Shipping Weight: 3,550 lb (1,610 kg)*No Cooling System**With Companion Flange
-
Product
Engine Dynamometer
DX32
-
Power: 500 hp (373 kW)Torque: 1,608 lb-ft (2,181 Nm)Speed: 4,000 rpmWater Use*: 37 gpm (140 lpm)Inertia Value**: 42.9 lb·ft2 (1.8 kg·m2)Shipping Weight: 1,451 lb (658 kg)Rotation: bi-directional
-
Product
Miniature Dual Axis Wireless Sensor
-
Advanced Telemetrics International
This custom, miniature, dual axis wireless sensor measures both torque and thrust (axial force). Two super miniature strain gage transmitters, housed within the sensor body, are powered inductively. Onboard sensor excitation and signal conditioning is also contained within the transmitters.
