Torque
turning force.
See Also: Torque Sensors, Torque Testers, Torque Transducers, Torque Meters, Dynamometers
-
Product
Run Down Adapters
RDA
-
The run down adapter (RDA) is designed to provide consistent and reliable torque readings for use with power driven torque control tools. The RDA’s reduce the impact and irregular peaks that cause poor repeatability. Each RDA has an effective torque range and will supply repeatable torque data within that range if used correctly. The run down adapter is mounted in-line between the tool drive and transducer.
-
Product
Radial Gearing Multipliers
-
Mountz radial gearing torque multipliers are specifically designed to meet the needs of companies servicing plate heat exchangers in HVAC, chemical, dairy, marine, and petrochemical applications. Able to deliver repeatable, accurate amounts of torque, Mountz radial gearing torque multipliers prevent damage to plate heat exchangers during routine service, reducing the risk of expensive unplanned equipment downtime. The low profile heads of Mountz radial gearing torque multipliers allow them to fit into tight access points, helping you work more effectively. With over fifty years of direct industry experience, Mountz tools can be trusted with the costly assets your company relies on.
-
Product
Torque Measuring and Monitoring System
WISER 4000
-
TECAT Performance Systems, LLC
The WISER 4000 system is the latest release of TECAT’s low-cost, ultra-low power and extremely accurate torque sensor. The wireless system has the optional ability to measure 3-axis acceleration, barometric pressure and ambient temperature, all within the same incredibly small footprint. The 4000 includes on-board data logging without PC or DAQ connectivity, and remote flash capability, which enables firmware upgrades without removing the system from the unit under test. Featuring shunt calibration, TECAT’s latest WISER system is designed to simplify instrumentation verification for users, while allowing them to check calibration of the system in the field. In addition, the WISER 4000 has been enhanced with two additional outputs, a higher-speed recording, and is available with custom-built remote enclosures to protect the system’s remote unit and battery from damage due to debris.
-
Product
Engine Dynamometer
DX36
-
Power: 1,500 hp (1,119 kW)Torque: 4,825 lb-ft (6,542 Nm)Speed: 4,000 rpmWater Use*: 109 gpm (412.6 lpm)Inertia Value**: 121.6 lb·ft2 (5.1 kg·m2)Shipping Weight: 2,240 lb (1,016 kg)Rotation: bi-directional
-
Product
Process Verification with Augmented Reality
PVS AR
-
Connected to our standard, open PVS (Process Verification System) platform, the new early adopter PVS AR system, allows users to do several things, not yet seen in the industry. First, by connecting to a wide variety of standard torque tools, standard PVS connectivity allows customer choice to pick the right tool for the right job, but now allows these tools to be used in an augmented reality framework.
-
Product
Torque and Force Calibrators
-
Self-contained, semi-automated, multi-functional calibrator, which provides a rapid highly accurate and safe means for calibrating and testing a wide variety of torque and force measuring instruments.
-
Product
Torque Instruments
Advanced Force & Torque Indicator
-
Used with a range of 'plug and play' torque and force sensors - ideal for 'static' or 'dynamic' (rotary) torque measurementCan be used as part of a Mecmesin test system or mounted to one of your own test rigs
-
Product
XCITE 1200T Torsional Series
-
The Xcite 1200T Continuous Torsional Exciters provide high inertial torque in the frequency ranges required to excite steam turbine rotors, deisel engine crankshafts, and ship power drive trains. The speed range of up to 3600 RPM for the 1200T-9 and 7500 RPM for the 1200T-10 system is ideal for testing a broad range of rotating power generation equipment.
-
Product
Force Sensors
-
Here at Flintec, our force sensor range provides solutions that integrate effectively into a wide variety of industrial applications. They include customized load pins, extensometers, torque sensors and a range of miniature force sensors.
-
Product
Torsion Testing Machine
-
JINAN PRCISION TESTING EQUIPMENT CO., LTD
Used to determine the torque load of specimens made of different materials in static tests.
-
Product
07 THT Horizontal | Without Bezel
07-0xxx-00xxx
-
Compact coded switch with HEX, Gray or BCD coding, up to 16 position, up to 3.5 Ncm switching torque and perfect for rugged environments
-
Product
Plate Rheometer
DVNext Cone
-
The DVNext Wells-Brookfield Cone/Plate Rheometer is a precise torque meter which is driven at discrete rotational speeds. The torque measuring system, which consists of a calibrated beryllium-copper spring connecting the drive mechanism to a rotating cone, senses the resistance to rotation caused by the presence of sample fluid between the cone and a stationary flat plate.
-
Product
Engine Dynamometer
H3610M
-
Power: 10,000 hp (7,457 kW)Torque: 50,000 lb-ft (67,820 Nm)Speed: 2,500 rpmInertia Value**: 1,963 lb-ft2 (82.72 kg-m2)Shipping Weight: 15,750 lb (7,144 kg)
-
Product
Torque Sensors
-
To improve your product quality and lower your product loss rate, try Mountz torque sensors. Whether you need laboratory-grade precision to measure hand tool output in inch-ounces or the durability to handle frequent pneumatic tool testing in the foot-pound range, Mountz has the right torque sensor for your application. In-line rotary torque sensors even allow you to directly measure the torque a power tool applies to an actual fastener, giving you the most accurate measurement possible. Designed for ease of use, Mountz torque sensors are plug and play, helping technicians get right to work and minimizing the chance of error.
-
Product
BF-Series Soft Stop Plus Models
-
The E-DRIV® BF-Series soft stop plus models is designed with an unique "soft-stop" shock absorbing clutch that is ideal for fastening shock sensitive components such as disk drives, plastics, and electronics. The ergonomically designed soft stop clutch reduces impact and vibration transmitted in the screw fastening process, which delivers less torque reaction to operator. The electric screwdriver offers a Double Hit Mode for soft joint applications and a selectable Soft Start mode. Designed for precision torque control the brushless motor design ensures durability and reduces the standard maintenance costs associated with brush type electric screwdrivers. The NF power tool is ESD certified, ensuring less than 1 Ohm at the bit tip. ESD management assures product quality, cost savings and a reduction in overall ESD failures.
-
Product
Adjustable Torque Screwdrivers
-
Mountz adjustable screwdrivers can save manufacturers and maintenance workers time and money by allowing them to accurately tighten critical fasteners of different sizes—all with a single tool. Thanks to the externally adjustable torque setting on these tools, you can quickly switch torque values in the field or at the station, leading to improved productivity. Because Mountz adjustable torque screwdrivers are controlled by the same highly effective internal clutch mechanism as preset screwdrivers, companies can boost worker output while ensuring accurate, dependable results.
-
Product
Load/Force/Torque Sensor
-
Load cells and force sensors engineered and manufactured by Stellar Technology can be found in industrial applications all over the world. These include market sectors such as aerospace, oil & gas, automotive,
-
Product
Process Verification System (PVS)
-
In today’s complex manufacturing world, having a manufacturing tool that can be connected into manual and automated processes, can help you achieve your error proofing goals. Whether you are assembling a complex modern tractor trailer design or building the next generation jet engine. If you have a variety of manual steps or a mix of automated processes, PVS is the tool of choice to make your LEAN manufacturing process, an effective one. The ARC PVS platform is a flexible, user configurable software and hardware platform that can be the essential tool. It includes a built-in controller architecture allowing you to connect together PLCs, smart torque and assembly tools and a variety of discrete processes.
-
Product
High Precision Canister Load Cell
Model 2000 Series
-
The Model 2000 Series High Precision Canister Load Cell was designed to accurately and precisely measure force, which many other quantities such as torque, thrust, and pressure are based, for aerospace applications. The Model 2000 Series, available with load measurement capacities up to 750K lbf, offers high performance and linearity and very low hysteresis. ±0.02% FS Hysteresis
-
Product
Torque Tester
WDISR-RL series
-
Separate type digital torque driver. The detector is compact and lightweight, for the control of small torque . Interlocking with a personal computer or PLC, the torque measurement can be managed at a higher level. Various screw tightening tests, final tightening checks, tightening data storage, etc.
-
Product
Contactless Torque Transducers
RS425
-
These contactless Torque Transducers are not limited by operational speeds, can fit any shaft and capable of measuring torque from 1nm and up to 500knm, providing highly accurate and reliable torque measurement in many applications.
-
Product
Engine Dynamometer
DX34
-
Power: 1,000 hp (746 kW)Torque: 3,217 lb-ft (4,361 Nm)Speed: 4,000 rpmWater Use*: 73 gpm (276.3 lpm)Inertia Value**: 82 lb·ft2 (3.5 kg·m2)Shipping Weight: 1,846 lb (837 kg)Rotation: bi-directional
-
Product
07 THT | Horizontal Or Vertical | Threaded Or Non-Threaded
07-Coded-Overview
-
Compact coded switch with HEX, Gray or BCD coding, up to 16 position, up to 3.5 Ncm switching torque and perfect for rugged environments
-
Product
04 With Soldering Eyelets | 2 Wafers | 24 Positions
04-2xx3-00/30-xx
-
Very robust, multi wafer selector with 15° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
-
Product
Torsion Testing Machine
-
Unique ‘TALCON-CLAW’ Grips for Round and Flat SpecimensTorsional Speed of 0.1/0.2 RPMTorque Compensated MotorsMaintenance Free Gear Box Auto Range Selection with Range Selector Wheel (Optional)3 or 4 Torque Ranges for Higher Accuracy (Optional)Load-unload Capability Variable Speed Drive (Optional)
-
Product
Motor Torque Detector
MT Series
-
High-performance motors including ultra-precision motors are used in various fields. Many different types of motors are used in versatile applications, such as ultra-high-speed motors used in home appliances, low-speed motors used in OA equipment and AV equipment, and ultrasonic motors.
-
Product
Torque Detectors
RH series
-
High rigidity: highly accurate detection of torque fluctuation with high response. The RH series is a torque detector that can accurately detect torque fluctuations with high torsional rigidity about 4.5 times compared to the existing products.
-
Product
Engine Dynamometer
DX34-HS
-
Power: 1,000 hp (746 kW)Torque: 3,217 lb-ft (4,361 Nm)Speed: 6,000 rpmWater Use*: 73 gpm (276.3 lpm)Inertia Value**: 82 lb·ft2 (3.5 kg·m2)Shipping Weight: 1,846 lb (837 kg)Rotation: bi-directional
-
Product
Prop Shaft Torque Measurement Systems
-
Advanced Telemetrics International
ATi Telemetry Systems are typically used to transmit data from rotating shafts or machinery to a stationary receiver. The Miniature Strain Gage Transmitter can be attached to strain gages adhered to your shaft in order to transmit shaft torque and thrust while the system is running.
-
Product
04 With Pins For PCB | 2 Wafers | 24 Positions
04-2xx3-20/70-xx
-
Very robust, multi wafer selector with 15° detent angle, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles
