Product

Tone And Probe Kit

3PK-NT023N

-

Prokit's Industries Co., Ltd.

3PK-NT023N - Prokit's Industries Co., Ltd.

For professionals who need fundamental wire identification tools without the extra cost, the 3PK-NT023N basic Tone and Probe Kit is the answer. Use it on de-energized AC wire, telephone/twisted pair wire, all voice and data category rated cable, speaker wire, virtually any cable or wire!

Product

Vibration Isolation Tables

-

Probing Solutions, Inc.

Probing Solutions, Inc.

Probing Solutions offers Vibration isolation tables made by Kinetics and TMC. To order a table, please call PSI at (775) 246-0999, or email sales@probingsolutions.com for a quote.

Product

Probe M/F lead - short (2")

PK106-6

-

Teledyne LeCroy

PK106-6 - Teledyne LeCroy

Probe M/F lead - short (2").

Product

Benchtop Discrete Component Tester

Imapact 7BT

-

Lorlin Test Systems

Imapact 7BT - Lorlin Test Systems

The 7BT Benchtop Discrete Component Tester is designed to test small signal and power semiconductor components in both single and multi-device packages or hybrids.. The 7BT automatic test system can be used in all test applications including incoming inspection, wafer probe, QC, engineering, production, final test, and high reliability.

Product

Anemometer-Thermometer

HD2303.0

-

Senseca

HD2303.0 - Senseca

Anemometer-Thermometer for air speed measurement which use hot-wire or vane probes, for temperature Pt100 sensor with SICRAM module.

Product

Fiber Inspection & Cleaning

-

ShinewayTech

ShinewayTech

ShinewayTech Fiber Inspection & Cleaning - Optical Connector Inspector, Wireless FIber Inspection Probe, Cleaning Pen, & more.

Product

Transmitters for Humidity Measurement

-

Process Sensing Technologies

Process Sensing Technologies

Our humidity and temperature measurement transmitters with either an interchangeable probe input, or a fixed / integrated probe provide high precision measurements with analogue or digital outputs for process monitoring and control.

Product

250 MHz Passive Probe for HDO4000, 10:1, 10 MOhm

PP017-1

-

Teledyne LeCroy

PP017-1 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Product

Electron Probe Microanalyzer

EPMA

-

JEOL Ltd.

EPMA - JEOL Ltd.

JEOL commercialized the world's first FE-EPMA, the JXA-8500F in 2003. This highly regarded FE-EPMA has long been used in various fields, such as: metals, materials and geology in both industry and academia. The JXA-8530FPlus is a third-generation FE-EPMA that comes with enhanced analytical and imaging capabilities. The In-Lens Schottky field emission electron gun combined with new software provides higher throughput while maintaining high stability, thus allowing a wider range of EPMA applications to be achieved with higher resolution.

Product

Ultrafast Joulemeter

-

Gentec Electro Optics, Inc.

Gentec Electro Optics, Inc.

Measure every pulse at up to 200 kHz with MACH 6. Measure with 12-bit digital accuracy and capture up to 4 million pulses in real time. Our MACH 6 Joulemeter is the only instrument in the world that performs at this speed, and with this precision. It is designed to support our full complement of fast energy probes that include Silicon, InGaAs and Pyroelectric Detectors. Measure from pJ to mJ and from 0.35 to 2.5 m. Using the M6-Si detector and the M5-UC-QED accessory, you can make relative measurements at 266 nm.

Product

LED View Angle Tester

-

WeiMin Industrial Co., Ltd.

WeiMin Industrial Co., Ltd.

360°rotate perspective die scanning.0.36° as the smallest test step unit.Conjunction with LED tester for electrical and optical parts test.Test data collection and perspective diagram drawing.Support 4 sets of probe socket (standard equipment with 2 sets of probe sockets)Clip structure. Easy for die positioning.

Product

Single-ended, Direct Connect Probe, 34-Channel, 4 X 160-pin

U4206A

-

Keysight Technologies

U4206A - Keysight Technologies

The U4206A is a direct-connect probe/cable with a standard soft touch pro connector at one end that routes to four 160-pin connectors that plug into the front panel connectors of a U4164A logic analyzer module. The U4206A is designed to be used with either the quad state mode or ¼ channel 10 GHz timing mode of the U4164A logic analyzer module. For use in quad state mode only, the U4206A includes two flying leads to connect additional clock qualifier signals into the clock inputs on Pods 3 and 7. Please refer to the U4164A installation guide for specific details on the operation of the U4164A quad sample state or ¼ channel 10 GHz timing modes of operation.

Product

Microwave Testing

500B

-

Picoprobe

500B - Picoprobe

The Model 500B Picoprobe sets new® standards in microwave probing performance. Benefiting from coaxial techniques, which have inherent low loss and low dispersion characteristics, the Model 500B Picoprobe achieves an insertion loss of less than 4.0 db and a return loss of greater than 15 db over its frequency range (see accompanying data).

Product

500 MHz Passive Probe, 2.5mm, 10:1, 10 MOhm

PP021-1

-

Teledyne LeCroy

PP021-1 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.

Product

Probe Ground Lead (short sp probe tip)

PP005-GLPT

-

Teledyne LeCroy

PP005-GLPT - Teledyne LeCroy

Probe Ground Lead (short sp probe tip).

Product

Web Sensor Hygrometer

T3511-2

-

COMET SYSTEM, s.r.o.

T3511-2 - COMET SYSTEM, s.r.o.

Web Sensor with relative humidity and temperature probe. The device is supplied with T+RH probe on the cable.High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Dual line LCD is an advantage. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.

Product

Probe Cards

-

Cohu, Inc.

Cohu, Inc.

High-performance field repairable direct-attach probe cards.