Scanning Electron Microscopy
surface imaging from 1 to 5 nm in size.
See Also: Scanning Electron Microscopes, SEM
-
Product
AC and DC Electronic load
63800 series
-
The Chroma 63800 Loads can simulate load conditions under high crest factor and varying power factors with real time compensation even when the voltage waveform is distorted. This special feature provides real world simulation capability and prevents overstressing thereby giving reliable and unbiased test results. The 63800's state of the art design uses DSP technology to simulate non-linear rectified loads with its unique RLC operation mode. This mode improves stability by detecting the impedance of the UUT and dynamically adjusting the load's control bandwidth to ensure system stability. Comprehensive measurements allow users to monitor the output performance of the UUT. Additionally, voltage & current signals can be routed to an oscilloscope through analog outputs. The instrument's GPIB/RS232 interface options provide remote control & monitor for system integration. Built-in digital outputs may also be used to control external relays for short circuit (crowbar) testing.
-
Product
High Current Probes (Power Electronics) HCF72306B230G150
1019851
-
The High Current Probes (Power Electronics) HCF72306B230G150 offers a robust and precise solution for testing and measurement applications. Engineered with high-grade materials such as beryllium copper for the plunger, these probes are designed to operate efficiently within a temperature range of -45°C to +200°C. With a continuous current capacity of 30A and a typical contact resistance of just 8 mOhm, they ensure low-latency readings and reliable performance in various electrical applications.
-
Product
High Current Probes (Power Electronics) H775LA
1005064
-
The High Current Probes (H775LA) are designed for power electronics applications, providing robust connectivity and precision measurements for various electronic components. With a total length of 40 mm and an outer diameter of only 4.00 mm, these probes are specifically engineered to fit into tight spaces while ensuring maximum performance. The solder connection type ensures a reliable and solid electrical contact, crucial for high current applications, while the meticulously designed press ring diameter of 4.30 mm facilitates easy installation without compromising on connectivity strength.
-
Product
High Current Probes (Power Electronics) HCF77512A400U300
1016236
-
The High Current Probes HCF77512A400U300 are precision instruments designed for power electronics applications, boasting a robust and versatile design suited for various testing environments. With a high-temperature tolerance ranging from -45°C to +200°C, these probes ensure reliability in diverse conditions. Featuring a pitch of 5.00 mm (197 mil), they are engineered to deliver exceptional performance in accuracy and stability. The solid construction allows continuous current handling up to 50 A, while maintaining a typical contact resistance of just 5 mOhm, making them ideal for high-performance applications.
-
Product
Drive Controller Function Test – Universal Functional Test System for Industrial Electronics
Functional Test
General functional test system based on LXI instrumentation for high mix / low to medium volume manufacturing. DUTs are tested which are mainly used as communication and measurement modules in power plant technology, grid management and electrical drives.
-
-
Product
Linear Electron Accelerators Where Electrons Reach Energy Of Up To 10 MegaWatt
-
*Processing polymer materials and modifying their parameters*Processing semiconductor materials and devices*For treating food products for disinfection, eliminated bugs, pathogens, and micro-organisms, and increasing their shelf life*Processing diamonds, precious stones and semi-precious stones to change their color
-
Product
Electronic Ballast Tester
WT4000
-
• Measure parameter: 1) Input: Vrms, Lrms, W, PF, Hz, Phasic angle, total harmonic and 0-39 component of harmonic. 2) Output: Lamp voltage, Lamp current, Filament current, Guided cathodic current, Lamp power, crest factor and oscillatory frequency, single high frequency analysis. • Startup: Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time; • Simultaneously display on 8 windows for input and output parameters, convenient for comparison and analysis; • Test preheat energy, filament preheat time. And the parameters changes from 0 to 5s of filament voltage, filament current and filament power; • Up to 1MHz lrms test content to every EB; • Analysis symmetry of high Frequency curve of lout; • 12-bit high-speed A/D, sampling rate up to 10MHz, can easily analyse signal curve of output; • Finish an input and output testing at the same time within 1 minute; • Portable, can test, display, print without computer. Test report include data and curve, comply with international standard; • Communication port for PC, run under Windows98 or Windows2000, English Version available.
-
Product
High Current Probes (Power Electronics) HCF77306B300G150
1009398
-
The High Current Probes (Power electronics) model HCF77306B300G150 is specifically designed for high-performance applications in demanding environments. With a robust operating temperature range of -45°C to +200°C, this basic contact probe excels in reliability and performance under extreme conditions. The probe features a compact design with a pitch of 3.50 mm, making it suitable for various integration needs in power electronics.
-
Product
Programable Power Supply & Programable Electronic Load
PW-8033P
-
*DC 0~32V / 0~3A X 2 + Fix 5V/3A*Triple Output 207 VA High Power*4 Digits, 4 Display*Programable Control, 9 Memory*Built In USB Interface*Series 0~64V / 0~3A Operation
-
Product
Boundry Scan Testers
-
Qmax Test Technologies Pvt. Ltd.
Boundary Scan Trainer Kit was developed by Qmax to provide user a good understanding and hands on the testing principals of boundary scan namely the scan chain test, interconnect test, non-BS functional testing of logic IC and cluster like a combinational or sequential circuits.
-
Product
Hot Electron Bolometer (HEB) Mixers/ Receivers In Terahertz Range
-
Insight Product Company offers Hot Electron Bolometer (HEB) mixers, receivers, and chips made from NbN or NbTiN thin film. The HEB mixers can operate at frequencies of up to several terahertz.
-
Product
Electronic Tensile Tester
QT-ETT
-
QT-ETT tensile testing equipments are specially designed considering tensile testing requirements for flexible materials that are commonly used in product packaging to study different properties of materials. This instrument utilizes Qualitest's latest embedded control system and operating software, with user-friendly operating interface and intelligent data management system.
-
Product
electronic Consolidated Automated Support System
eCASS
-
electronic Consolidated Automated Support System (eCASS) will validate that the aircraft is combat ready. eCASS is the workhorse for avionics repair across the Naval Aviation Enterprise. Through automated testing at sea and ashore, maintainers are able to return equipment to readiness status quickly and efficiently. Compatibility with legacy CASS stations preserves the Navy’s investment in more than 550 Test Program Sets supporting 750 avionic components.
-
Product
High Current Probes (Power Electronics) HCF77306B400G500
1147573
-
Introducing the High Current Probes (Power Electronics) HCF77306B400G500, designed for superior performance with a robust set of specifications tailored for demanding applications in power electronics. This innovative probe is capable of operating in extreme temperatures ranging from -45°C to +200°C, making it a versatile choice for various testing environments. The HCF77306 probe features a basic contact design that ensures reliable and accurate readings, crucial for electronic measurement tasks. With a continuous current rating of 30A and a typical contact resistance of just 8mOhm, it guarantees minimal energy loss and peak efficiency during operation.
-
Product
High Current Probes (Power Electronics) HCF33009S210L210
1001366
-
The HCF33009S210L210 High Current Probe is specifically designed for high-performance power electronics applications, providing exceptional handling of current up to 14.00 A with a robust typical contact resistance of only 15.00 mΩ. This probe features a unique basic contact design with a pitch of 3.00 mm, allowing for precise integration into various electronic systems. Capable of operating in extreme temperatures ranging from -45°C to +200°C, it provides reliability and accuracy in demanding environments.
-
Product
Optical Coherence Tomography Imaging Line Scan Cameras
OctoPlus Range
-
Teledyne e2v spent 2 years developing a CMOS sensor specifically for OCT. This resulted in the launch of OctoPlus, which has a specially designed pixel architecture that improves sensitivity and reduces signal roll-off to improve image quality by several dB vs state-of-the-art CMOS cameras, especially in deep structures.
-
Product
Test system for Electronic Device
PCB
-
The main focus of the test system is validation and functional testing of electronic devices. The tests include electrical parameters and logical functions of the firmware. Device groups can be stimulated externally and output signals can be acquired by the test points on the board. Limits and ranges of the acquired signals can be monitored and stored for verification.
-
Product
High Current Probes (Power Electronics) HCB085A11MG4
1012158
-
The High Current Probes (Power electronics) HCB085A11MG4 is designed for robust electrical connections in various high-performance applications. This basic contact probe boasts a compact design with a total length of just 8.90 mm and a projection height of 4.90 mm, making it suitable for precise insertion and reliable contact. With a wide temperature operating range from -45°C to +200°C, the HCB085A11MG4 can withstand harsh environments while ensuring optimal performance. This probe features a nominal travel of 1.00 mm and a maximum travel of 1.20 mm, providing flexibility for different application requirements.
-
Product
Electronic Engine Instruments
-
Is a flight instrument display system in an aircraft cockpit that displays flight data electronically rather than electromechanically.
-
Product
Surface Mount Reed Relays from Pickering Electronics
Reed Relay
Pickering Electronics Surface Mount Reed Relays contain the highest quality instrumentation grade reed switches making them suitable for the most demanding applications and are suitable for infra-red or vapor phase reflow soldering.
-
Product
High Current Probes (Power Electronics) HCB045A11MS12
1040030
-
The High Current Probes (Power Electronics) model HCB045A11MS12, designated by the order code 1040030, is designed for high-performance applications requiring precise electrical measurements. These probes operate across a wide temperature range from -45°C to +200°C, ensuring versatility in various operating environments. Their robust design incorporates components made from high-quality materials, such as beryllium copper for both the tip style and plunger, which are plated with gold for enhanced conductivity and durability. Furthermore, the entire assembly includes a brass block with silver plating, making it resilient against corrosion and wear, thus ensuring reliability over time.
-
Product
500 Watt Electronic Load Module
N3305A
Load Module
The Keysight N3305A is a 500 W (0-60A, 0-150V) electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3305A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3305A can also digitize waveforms.
-
Product
Universal Function Test System for Industrial Electronics
Test System
General functional test system based on LXI instrumentation for high mix / low to medium volume manufacturing. DUTs are tested which are mainly used as communication and measurement modules in power plant technology, grid management and electrical drives.The system has a Virginia Panel adapter interface to which various desk adapters can be docked, including automated contacting of the DUTs. A camera for the verification of light emitting diodes on the test object is integrated in the adapter interface.
-
Product
Boundary Scan Test
-
Boundary Scan is a very useful tool for quick, low-cost, re-usable powered-up test of an assembly for basic functionality. Because a fixture with test probes is not required, it is possible to have a working test available within hours or days, rather than weeks. Designers can receive rapid feedback on their prototype boards with tests that can be used again during production testing, as well as for device programming. Given power, ground and Tap port signals, tests can be written to assess the performance of the boundary scan enabled parts on an assembly and other parts on the boundary scan chain.
-
Product
Electronic Loads
-
PeakTech Prüf- und Messtechnik GmbH
Can be used for important test procedures in quality assurance as well as e.g. testing of power supplies and control units, batteries, fuel and solar cells. For precise load control for various purposes, this device offers load control according to constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP) with a highly precise resolution of 1mW, 1mV, 1mΩ and 1mA. The device also offers additional test modes, e.g. the battery test or the dynamic test. The PC interface and software offer the option of implementing freely programmable test sequences with data evaluation.
-
Product
DC Electronic Load
-
Siglent SDL1000X series Programmable DC Electronic Load features an input range up to 150V/30A/300W. CC Dynamic mode frequency is up to 25 kHz. It delivers stability over a wide range of applications and can meet all kinds of testing requirements including: Power, battery/handheld device design, industry, LED lighting, automotive electronics, and aerospace.
-
Product
LED DC Electronic Load Simulator
3340G Series（150W~300W）
-
Each 3340G Series module has its own control and display panel, LED/CC/CR/CV/CP/ Dynamic modes, plug in 3300F with 150 sets Store/Recall memory which provides load set-up more efficiently，also can be controlled intranet via RS232、Ethernet、USB and GPIB interface.
-
Product
Boundary Scan Software
ACUTAP Toolkit
-
The ACUTAP Toolkit is a handy collection of tools for reading, writing, modifying, checking, testing and working with BSDL files and boundary scan testing situations.
-
Product
Turret Test And Scan Handlers
-
Turret platforms for semiconductor test, inspection and packaging.
