Product

Active Probe

TETRIS®

-

PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

TETRIS® - PMK Mess- und Kom­mu­nika­tion­stech­nik GmbH

MK presents a unique inline probing system – the TETRIS® Active Probe which can contact adjacent square pins in 2.54 mm pitch simultaneously. 1 MΩ / 0.9 pF

Product

Rebound Hammer

Type N for concrete

-

PASI srl

Type N for concrete - PASI srl

Rebound Hammer Type N :*Use for concrete> 10cm and hard rocks*Measuring range: 10-60N / mm 2 *Impact energy: 2.207Nm

Product

Mini SMP Connectors

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Mini SMP connector series, also known as SMPM connectors, are ultra-miniature, high frequency connections commonly used in applications up to 65 GHz. Mini-SMP connector category will terminate to coax or PCB (printed circuit board) and many mini-SMP connectors are hermetically sealed. Pasternack mini SMP connectors are built to precise microwave and RF industry specifications and many are RoHS and REACH compliant. SMP mini connector products are built in male or female gender with 50 Ohm impedance. Mini-SMP connectors are available in straight or right angle versions, as well as, mountless options. These Mini-SMP connector designs include solder attachment methods. As with the other over 40,000 RF, microwave and millimeter wave components from Pasternack are in-stock. Not only in stock, but these SMP mini connectors will ship the same day as they are purchased.

Product

Gel Strength Test System

LD-LGST-A10

-

Labodam

LD-LGST-A10 - Labodam

Gel Strength Test SystemLD-LGST-A10is mainly used to measure the gel strength of gelatine under the stipulated environment. It has traveling accuracy ± 0.3 % and Test range up to 5 to 1000 g Bloom. It consists of Jelly Strength Tester, Constant Temperature Bath and Refrigerator. Sampling depth can be present arbitrarily in 1 to 60 mm. It consists four kinds of sampling measurement modes: single-step, maintaining, circulating and automatic.

Product

Basic Contact Probe H075LI-7.6

1010824

-

FEINMETALL GmbH

1010824 - FEINMETALL GmbH

The Basic Contact Probe (75 mil) H075LI-7.6 are designed for superior electrical performance, featuring a continuous current capacity of 4.00 A, making them ideal for applications requiring reliable connectivity. With a precise pitch of 1.90 mm, these probes ensure accurate contact alignment and efficient operation in various mechanical settings. Their high-quality construction includes stranded wire for flux-proof connections, guaranteeing durability and resistance to wear in challenging environments.

Product

Rack Mount Osprey Chassis 9-Slot Unibus

9677-U

-

Strobe Data Inc.

9677-U - Strobe Data Inc.

14" high by 19" wide by 20" deep (356 x 483 x 508 mm), this chassis is FCC certifiable**. AT style motherboard, 3 x 5-1/4" bays, 2 x 3-1/2" bays, 1 hidden, 1 exposed. Cooling fans and space are included for user's hex-height, 9-slot DD-11 Unibus backplane, PC motherboard, diskette and hard drives (one hidden and four visible half-height bays).

Product

I/O Board With Two COM, Four USB 2.0 And Audio For PICO840, PICO841, PICO842, PICO843

AX93283

-

Axiomtek Co., Ltd.

AX93283 - Axiomtek Co., Ltd.

*Specifications: 1 x RS-232/422/485, 1 x RS-232, 4 x USB 2.0, 1 x Audio (MIC-in/Line-out), 1 x power-on, 1 x Reset, 2 x LED*Dimensions: 118 x 29 mm*Compliant products: PICO840, PICO841, PICO843

Product

Basic Contact Probes (100 Mil) F10014S150L150

1017695

-

FEINMETALL GmbH

1017695 - FEINMETALL GmbH

The Basic Contact Probes (100 mil) F10014S150L150 are designed for high-precision applications, ensuring reliable performance across a wide range of temperatures from -45°C to +80°C. With a pitch of 2.54 mm (100 mil), these probes are tailored to meet the rigorous demands of modern electronic testing. The probes feature a robust design, with a total length of 33.30 mm and a projection height of 8.40 mm, making them versatile for various setups and easy to integrate with existing systems.

Product

Classic Collet | Black | Without Line | Matt Or Glossy | Ø 28 Mm

020-5x20/5

-

ELMA Electronic, Inc.

020-5x20/5 - ELMA Electronic, Inc.

Secure plastic mounting cap for collet or wing knob

Product

Wire Damaged Tester

WDT-1

-

Lisun Electronics Inc.

WDT-1 - Lisun Electronics Inc.

This equipment is designed and manufactured according to corresponding regulation in standard IEC884-1, GB299.1-96, GB16915.1-97 and other electronic accessories relevant standard. Mainly used to test damage degree of fixed connection components lead wire of with thread clamping type and no screw terminals, so as to inspect whether it can withstand mechanical stress during normal use.Specification: • Power supply: AC220V 50Hz • Test rate: 10±2r/min (GB16915.1-97: 12 ±1r/min) • Rotating radius: 100mm • Test distance: 250~500mm adjustable • Test numbers (Number of rotating): 0~999999 any set • Mass: 0.3KG, 0.4KG, 0.7KG, 0.9KG, 1.4KG, and 2.0KG (GB16915.1-97: 30N, 40N, 50N, 60N each of 2 pcs) • Stations: 2 • Dimension: 1200×1400×400 (mm) • Remarks: The mass and rotating radius can be optional as per customer requirements.

Product

Fine Pitch Probes FP800D2901B050G025L057

1130428

-

FEINMETALL GmbH

1130428 - FEINMETALL GmbH

The Fine Pitch Probes FP800D2901B050G025L057 are engineered for precision applications requiring outstanding reliability and performance across various temperature ranges. Designed within the FP-D family, these double plunger probes are optimal for tight pitch applications, featuring a pitch measurement of 1.00 mm / 39 mils, and are capable of operating effectively from -45°C to +200°C. Their compact design, with an overall length of 5.70 mm and a projection height of just 1.10 mm, makes them suitable for use in high-density electronic assemblies where space is a critical factor.In terms of electrical performance, the FP800D2901B050G025L057 probes can handle a continuous current of up to 3.50 A, while maintaining a minimal typical contact resistance of 55 mOhm. Moreover, they are designed to perform at frequencies of up to 7.10 GHz, ensuring high-speed data integrity for demanding applications. Mechanically, these probes exhibit a preload of 10.00 cN with a maximum travel capability of 0.85 mm, ensuring optimal contact while minimizing wear. Crafted from high-quality materials, the probes feature beryllium copper plungers with gold plating, ensuring both excellent conductivity and resistance to corrosion, thereby enhancing their lifespan and reliability in various environments.

Product

SINE M-19 Sinusoidal Array

-

Applied Image, Inc.

Applied Image, Inc.

The Sinusoidal Array SINE M-19 is a remarkable new test array that achieves 256 cycles per mm while maintaining a significant modulation. It is designed for testing high resolution optical systems such as microscopes. Because its maximum width is 7.5mm, the SINE M-19 is small enough to fit easily onto a standard microscope slide (the TM-G variation is mounted in glass).

Product

Handheld Water Quality Meters

LAQUA PD220

-

HORIBA, Ltd.

LAQUA PD220 - HORIBA, Ltd.

- Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)- 0.01 pH resolution- Offset and average slope display - Automatic / manual temperature compensation and temperature calibration function- ORP calibration option- Dissolved oxygen (DO) concentration in ppm (mg/L) and % saturation- 0.01 mg/L or 0.1% DO resolution- Compensates salinity, temperature, and atmospheric pressure - Up to 2 DO calibration points - With real-time clock and date/time stamp for GLP compliance- Auto log data; built-in memory can store up to 1000 data- Auto shut-off (programmable: up to 30 minutes)- Auto stable, auto hold, and real time measurement modes- Calibration alarm (programmable: up to 90 days)- Built-in electrode holder allows 2 electrodes to be attached- Monochrome LCD with white LED backlight: 50 x 50 mm- Phono jack output for connecting the meter to computer via PC (USB) cable for data collection and to printer via printer (RS232) cable for printout - Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip- Powered by 2 x AA batteries- Packaged with electrodes and calibration solutions in carrying case- 3 years meter warranty