Industry Pack Carrier
-
Product
Industrial Motherboards & SBCs
-
ADLINK’s full range of industrial computers for automation, including off-the-shelf frame grabbers, motion controllers, and data acquisition cards integrated with industrial computers provide the assurance of strict verification testing, presenting an optimum solution for combined motion & vision applications.
-
Product
Mounting Ear Kit, VTI Instruments, SMP 1100 Carrier
510109355
Mounting Kit
Mounting Ear Kit, VTI Instruments, SMP 1100 Carrier (for use with Part # 510109202)
-
Product
Test Sets For Motor & Generator Industries
-
Test Sets For Motor & Generator Industries are designed for no-load loss as well as heat run testing. They are ideal for offering clean power with precise regulation as well as voltage control. These sets are designed when there is no need of frequency conversion. With variable-frequency drive of these sets, they are used to select any output frequency from 50 Hz to 60 Hz. in addition to this, for larger requirements, from 50-to-200 Hz, this has been used as one of the most economical testing sets.
-
Product
Industrial Flash & Memory Solutions DDR3 Memory
-
SQRAM offers DDR3 memory modules with Samsung or Hynix chips and DDR3L of low voltage 1.35v backward to 1.5V compatible with Intel and AMD platforms.
-
Product
PCI Bus Carrier for IP Modules
APC8620A
-
This board interfaces industry-standard Industrial I/O Pack (IP) modules to a PCI bus on a PC-based computer system.
-
Product
Battery Pack Test System
-
*Easy to see now test progress*Can cycle test*Provide Charge, Discharge, Suspend, FOR, LOOP Mode Select*When Charging, set the stop current to stop charging when fully charged so as to avoid overcharging that will damage the battery. When Discharge, set the stop voltage to stop discharge when discharging to lowest so as to avoid over-discharging that will damage the battery.
-
Product
6 Pack of Clover 12 Oz Squeeze Bottles
-
6-Twelve ounces of clover honey in a convenient plastic squeeze tube.
-
Product
15V6A Battery Pack Test System
TOB-BTS-15V6A
-
Xiamen Tob New Energy Technology Co., Ltd
8 Channels 15V6A Battery Pack Test System Laptop Battery Performance Testing. TOB-BTS-15V6A Battery tester equipment is an eight-channel battery analyzer to analyze polymer battery and cylindrical batteries from 12 mA to 6000 mA, up to 15V.
-
Product
10.1" WSVGA And HD Resolution Industrial Display Kit
IDK-1110W
-
10.1" 1024 x 600 with 4-wire Resistive and 1280x800 with Projected Capacitive Touch solution. Brightness of 500 cd/m2 with LED backlight, LVDS signal interface, LED driver board included.
-
Product
Industrial Temperature Head Sensors
-
A selection of Head Mounted Industrial Temperature Sensors for many applications with RTD / PRT varieties, Hygienic and Heavy Duty probes.
-
Product
Observational Systems: Data Handlers And Battery Packs
-
Data loggers allow users to connect a variety of sensors to a single controller that manages, stores, and sends the collected data as a single data stream.
-
Product
Industrial Power Tester
MicReD Power Tester 600A
-
The MicReD Industrial Power Tester 600A supports automatic testing and diagnosis of possible failure causes of power components. Built for manufacturing as well as laboratory environments, it can power the modules through tens of thousands, potentially millions, of cycles while simultaneously providing real-time failure-in-progress diagnosis.
-
Product
Industrial Gas Detectors
-
Seitron designs and manufactures detectors for methane, LPG, gasoline vapours and carbon monoxide (CO) for commercial and process industry use. Our detectors provide three communication protocols 4..20mA, Modbus and S-Bus (a proprietary protocol derived from Modbus). You can also choose between two types of housings: polycarbonate for industrial use or ATEX-certified for the installation of detectors in ATEX-classified areas.
-
Product
Industrial PCs, Fanless Embedded PCs
-
The Matrix series of fanless embedded computers enhances responsiveness and durability of edge AI and edge computing applications. Designed to perform and to last, the Matrix fanless embedded computers enable timely data-driven decision making at the edge, improving efficiency, productivity and security enhancement across industries.
-
Product
ULI-234TC - 3-Way Isolated RS-422/485 Repeater, Industrial DIN Mount, Terminal Blocks
BB-485OPDRI
-
Repeater extends signals an additional 1200 m2 KV, 3-way optical isolation (input/output/power)Data rate: up to 115.2 kbpsWide temperature range: -40 to +80 °CDIN rail mount, IP30 case10-48 Vdc input (power supply required, not included, sold separately)Allen-Bradley 1747-AIC (DH-485 network)
-
Product
SQFlash 840V Series Industrial 2.5" SATA SSD
SQF-S25 840V
Solid-State Drive
GUI management tool & software API package, Shock resistance, anti-vibration and low power consumption. Support for voltage stabilizer, Support AES256 and Quick Erase. Supports Fragment Writing and Flush Manager, Support LDPC with RAID ECC. Compliant with SATA III and SATA v3.2 standard.
-
Product
cPCI IP Carrier Module With Front And Rear I/O
DP-cPCI-5211
-
DP-cPCI-5211 IP carrier board provides electrical and mechanical interface for four industry standard IP modules. The board provides full data access to the IP modules I/O, ID and memory spaces. The programmable registers are used for configuring and controlling the operation of IP modules.
-
Product
SQFlash 840L Series Industrial 2.5" SATA SSD, Enterprise Series
SQF-S25 840L
Solid-State Drive
Compliant with SATA III and SATA v3.2 standard, 5Y DWPD >1 High Endurance. Power Loss Protection, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, GUI management tool & software API package.
-
-
Product
Interface Module for the Multimode, Multiprotocol Excalibur 400 Family of Carrier Boards
M4K1553Px(S)
Interface Module
The M4K1553Px(S) interface module for the multimode, multiprotocol, Excalibur 4000 family of carrier boards provide a complete solution for developing and testing 1553 interfaces and performing system simulation of the MIL-STD-1553 bus. The module handles all standard variations of the MIL-STD-1553 protocol.Each M4K1553Px multi function module contains 64K bytes of dual-port RAM for Data blocks, Control registers, and Look-up Tables. All Data blocks and Control registers are memory mapped, and may be accessed in real time. Each of the independent dual redundant M4K1553Px modules may be programmed to operate in one of three modes of operation: Remote Terminal, Bus Controller/Concurrent-RT, and Bus Monitor. In addition, modules 1 and 3 can be programmed to operate as Concurrent monitors, to modules 0 and 2 respectively.Each M4K1553PxS single function (RT validated) module operates either as a Bus Controller, Remote Terminal, or Bus Monitor.
-
Product
NVIDIA® Jetson™ TX2-based Industrial AI Smart Camera for the Edge
NEON-2000-JT2 Series
-
ADLINK's NEON-2000 Series of the NVIDIA® Jetson™ based industrial AI cameras, integrate the Jetson™ Xavier NX or Jetson™ TX2, image sensor, optimized OS, and Rich I/O for vision applications in a compact chassis with verified thermal performance, saving users' Total Cost Ownership on integration and trouble shooting, as well as minizing footprint and cableing required for installation.
-
Product
Programmable Industrial PC
HyperPAC
-
The HyperPAC Industrial PC programmable control solution delivers top of the line performance with reliable operation for a variety of control and automation tasks. Compared to standard IPCs, the HyperPAC provides a highly compact, fanless solution, with existing expandable IO via PCIe, along with flexibility to expand and configure the system. The HyperPAC is a flexible, scalable solution for numerous applications and project requirements which enables IIoT (Industrial Internet of Things) integration.
-
Product
Industrial Microscope for Materials Science & Industrial Applications
BX53M
-
Designed with modularity in mind, the BX3M series provide versatility for a wide variety of materials science and industrial applications. With improved integration with OLYMPUS Stream software, the BX3M provides a seamless workflow for standard microscopy and digital imaging users from observation to report creation.
-
Product
Universal Function Test System for Industrial Electronics
Test System
General functional test system based on LXI instrumentation for high mix / low to medium volume manufacturing. DUTs are tested which are mainly used as communication and measurement modules in power plant technology, grid management and electrical drives.The system has a Virginia Panel adapter interface to which various desk adapters can be docked, including automated contacting of the DUTs. A camera for the verification of light emitting diodes on the test object is integrated in the adapter interface.
-
Product
Solution for Industrial Monitoring.
PDCheck
-
PDCheck is a compact, stand alone, global diagnostic system for the condition assessment of medium and high voltage electrical systems, based on the detection and analysis of PD
-
Product
PMC Carrier for 3U CompactPCI
TCP270
-
The TCP270 is a standard 3U CompactPCI carrier that provides front I/O and rear I/O for a single width PMC module. This PMC to 3U CompactPCI adapter is used to build modular, flexible and cost effective I/O solutions with PMC devices in CompactPCI systems.
-
Product
21.5" FHD 1, 200 Cd/m2 Ultra High Brightness Industrial Display Kit
IDK-2121W
-
21.5" LCD supports 1920 x 1080 pixels, Ultra-high brightness of 1200 cd/m2, High uniformity of 85%, Superior sunlight readability.
-
Product
8.4” SVGA 1,200cd/m2 Ultra High Brightness Industrial Display Kit
IDK-2108
-
8.4” LCD supports 800 x 600 pixels, Ultra-high brightness of 1200cd/m2 with LED backlight, -5℃~+60℃ wide operating temperature support. High contrast ratio of 600:1, Superior sunlight readability, Low power consumption 4.32W.
-
Product
Industrial and R&D Furnaces
-
We at Tempsens manufacture both Industrial and Laboratory Furnace and Ovens for varied applications which include sintering, annealing, tempering and calcination. The furnaces and ovens manufactured come in varied sizes and volume as per the application requirement.
-
Product
cPCI and PMC Compatible Adapter Carrier
cPCIBPMC3U64ET
-
By customer request Dynamic Engineering has developed two extended temperature versions of the popular cPCIBPMC design. The design effort included switching to a new bridge to meet the temperature and timing requirements. The new bridge brings new features including the ability to operate the PMC side at a higher clock rate than the cPCI side. The new bridge also has built in features for local address spaces, using the PMC clock in monarch mode for the secondary side, and operating in transparent or non-transparent modes
