High Voltage Switching Systems
HXV Series - Cytec Corp.
HXV products are high voltage systems intened for Hi-pot / IR or High voltage switching. They can be configured to drive from 32 to 128 switch points per chassis and can be configured as multiplexer (1xN) or Matrix (NxM) configurations. Stand HXV chassis are used for signals up to 5000 VAC rms ( 7400 V peak ) and can carry up to 5 amps of current. Custom systems can be built up to 25KV. Most of the modules used in these systems are 1xN multiplexers or 2x4 matrix modules that can be combined to form larger multiplexers or matrices. Connector options for standard HXV include 5 way banaba jacks / binding posts, Shrouded Banana Jacks or SHV ( High voltage BNC) if you need to use a high voltage cable with a grounded shield for safety applications. Control options include 10/100BaseT Ethernet LAN, RS232, GPIB or optional manual control. Standard HXV systems use high voltage reed relays. Custom HXV systems up to 25KV use application specific relays and connectors from a variety of vendors based on required specifications.
Topics
- High Voltage Switching
- High Voltage
- High Voltage Cable
- Systems
- Voltage
- Switches
- Switching
- Hipot
- Switching Systems
- Multiplexers
- Chassis
- Connectors
- Control
- Controllers
- Matrix
- Modulation
- Modulators
- Modules
- Relay
- Standards
- Amp
- BNC
- Cables
- Combiners
- Current
- Drives
- Ethernet
- GPIB
- Ground
- Infrared
- IR
- LAN
- Matrices
- MOST
- Polarization Extinction Ratio
- RS232
- RS-232
- Safety
- Shielding
- Signal
- Signaling
- V.35
- Control Systems
-
Product
Chassis - up to Sixteen 8x1 or 4x2 Modules & up to Eight 8k Modules
HXV/128-MF
Chassis
These Chassis controls up to 16 8x1 modules, 16 4x2 modules, or up to 8 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
Product
Chassis - up to Twelve 8x1 or 4x2 Modules & up to Six 8k Modules
HXV/96-MF
Chassis
These Chassis controls up to 12 8x1 modules, 12 4x2 modules, or up to 6 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
Product
Chassis - up to Four 8x1 or 4x2 Modules, or up to Four 8k Modules in a 4 RU Chassis
HXV/32-MF
Chassis
These Chassis controls up to 4 8x1 modules, 4 4x2 modules, or up to 2 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
Unlisted Product
High Voltage Modules for Applications up to 5000 VAC rms
HXV 7000 VDC / 5000 VAC
-
These switch modules use sealed reed relays to provide 7000 Volts peak breakdown isolation. Modules are available with Simple binding post / banana jack, Safety Sheaved Banana Jacks or ultra safe SHV connectors.
-
Unlisted Product
Custom HXV Systems up to 25kv
-
Cytec can build custom hiogh voltage systems up to 25 KV. Configurations are all done per customer request with many relay and connector options. Options include:Custom multiplexer or matrix configurationsApplication specific relay options for high voltage up to 25 KVApplication specific relay options for high current up to 25 ampsSeparate driver chassis for high isolation from EMP / EMCInterlock systems for safetyShielded cable groundsApplication specific connector options
Filter Products:
Chassis
-
Product
Chassis - up to Sixteen 8x1 or 4x2 Modules & up to Eight 8k Modules
HXV/128-MF
Chassis
These Chassis controls up to 16 8x1 modules, 16 4x2 modules, or up to 8 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
-
Product
Chassis - up to Twelve 8x1 or 4x2 Modules & up to Six 8k Modules
HXV/96-MF
Chassis
These Chassis controls up to 12 8x1 modules, 12 4x2 modules, or up to 6 of the 8K modules in almost any combination or configuration. LEDs on the front panel show switch and power status. Add Switch Modules, Driver Modules and a Control Module to complete the system.
Other Products
-
Unlisted Product
Custom HXV Systems up to 25kv
-
Cytec can build custom hiogh voltage systems up to 25 KV. Configurations are all done per customer request with many relay and connector options. Options include:Custom multiplexer or matrix configurationsApplication specific relay options for high voltage up to 25 KVApplication specific relay options for high current up to 25 ampsSeparate driver chassis for high isolation from EMP / EMCInterlock systems for safetyShielded cable groundsApplication specific connector options
