4-Channel ADC Module

ADC FMC Modules

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

2 Channel 1GSPS 8 Bit ADC Card in FMC

FM582 - Sundance Multiprocessor Technology Ltd.

The offset adjustment does not clip the signal at the highest range (+/- 5V). That is why the “max input signal amplitude” has been specified as 10V, even though the selection of signal ranges only goes up to 5V. This way, a +10V pulse with -5V offset could still be digitised without clipping.

Product Home Contact/Sales Distributors/Reps Manual Company Catalog Share Add To List

(HPC) FMC Module

ADC500-5 - Sundance Multiprocessor Technology Ltd.

FMC-ADC500-5 is a High Pin Count (HPC) FMC module with 5 ADC channels each running at up to 500MS/s with a dynamic range of 16 bits. The module has 5 ADC31JB68 ICs from Texas Instruments together with an HMC7044 from ADI which is the source of clocks feeding the ADCs. Provision for external clock input is also provided for this hardware.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

FMC-HPC ADC Board

FMC123 - Sundance Multiprocessor Technology Ltd.

The FMC123 provides four 16-bit A/D channels up to 1Gsps. The design is based on Texas Instruments’ ADS54J60 Analog-to-Digital converter. The sample clock can be supplied externally through a coaxial connection or supplied by an internal clock source (optionally locked to an external reference) for multi-channel synchronization. An external trigger input is available for timing synchronization. The FMC123 is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

14 Bit ADC Card

FMCADC100M14B4CHA - Sundance Multiprocessor Technology Ltd.

The FmcAdc100M14b4cha is a 4 channel 100MSPS 14 bit ADC card in FMC (FPGA Mezzanine Card) format. By default it uses only signals from the LPC rows of the HPC connector that is mounted. The gain can be set by software in three steps: +/-50mV, +/-0.5V, +/-5V. An advanced offset circuit is used in the front-end design of the ADC board, and allows a voltage shift in the range of +/- 5V that is independent on the chosen gain range.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4 Channel ADC FMC Module

ADCFN04 – HPC - Sundance Multiprocessor Technology Ltd.

The RFM-ADCFN04 is a four channel Analog to Digital converter FMC which complies with VITA 57.1-2010. Each channel provides DC coupled single-end analog input and digital output with DC-250KHz sampling speed based on Linear Technology’s LTC2376-16. The output is 16-bit data and it can be obtained through SPI interface on LTC2376-16 from the FPGA on the FMC carrier board. One trigger input is provided for capture control.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

2 Channel ADC – High-Pin-Count

ADCFN02 – HPC - Sundance Multiprocessor Technology Ltd.

The RFM-ADCFN02 is a two channel Analog to Digital converter FMC which complies with VITA 57.1-2010. Each channel provides AC coupled single-end analog input and 16-bit single-ended output with 20-105MHz sampling speed based on ADI AD9650. Single-ended external clock, differential external clock or an internal clock from the FMC carrier board can be selected at the FMC for the AD converter through fine clock generator ADI AD9518-3.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

6 Channel ADC FMC Module

ADCFN06 – HPC - Sundance Multiprocessor Technology Ltd.

The RFM-ADCFN06 is a six channel Analog to Digital converter FMC which complies with VITA 57.1-2010. Each channel provides single-ended analog input and 16-bit single-ended output with 20-25MHz sampling speed based on ADI AD9650. A DC coupled input is supported. Single-ended external clock, differential external clock or an internal clock from the FMC carrier board can be selected at the FMC for the AD converter through fine clock generator ADI AD9518-3.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

10 Channel ADC FMC Module

ADCFN10-DC – HPC - Sundance Multiprocessor Technology Ltd.

The RFM-ADCFN10 is a ten channel Analog to Digital converter FMC which complies with VITA 57.1-2010. Each channel provides single-ended analog input and 16-bit single-ended output with 20-105MHz sampling speed based on ADI AD9650. Both AC and DC coupled input are supported. Single-ended external clock, differential external clock or an internal clock from the FMC carrier board can be selected at the FMC for the AD converter through fine clock generator ADI AD9518-3.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

10 Channel ADC FMC Module

ADCFN10-AC – HPC - Sundance Multiprocessor Technology Ltd.

The RFM-ADCFN10 is a ten channel Analog to Digital converter FMC which complies with VITA 57.1-2010. Each channel provides single-ended analog input and 16-bit single-ended output with 20-105MHz sampling speed based on ADI AD9650. Both AC and DC coupled input are supported. Single-ended external clock, differential external clock or an internal clock from the FMC carrier board can be selected at the FMC for the AD converter through fine clock generator ADI AD9518-3.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

8-Channel ADC Module

FMC168 – LPC - Sundance Multiprocessor Technology Ltd.

The FMC168 is a digitizer FMC featuring eight ADC channels with 16-bit resolution and 250 Mega samples per second sampling rate per channel. With a flexible clock generation and distribution scheme, the FMC168 allows control on sampling frequency and analog input gain through serial communication with a carrier card. The FMC168 design is based on the TI ADS42LB69 Dual Channel 16-Bit 250 MSPS A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4-Channel ADC Module

FMC164 - Sundance Multiprocessor Technology Ltd.

The FMC164 is a digitizer FMC featuring four ADC channels with 16-bit resolution and a 250 Mega samples per second sampling rate per channel. With a flexible clock generation and distribution scheme, the FMC164 allows control on sampling frequency and analog input gain through serial communication with a carrier card. The FMC164 design is based on the TI ADS42LB69 Dual Channel 16-Bit 250 MSPS A/D, is equipped with power supply and temperature monitoring, and offers several power-down modes to switch off unused functions.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

2-Channel ADC Module

FMC161 - Sundance Multiprocessor Technology Ltd.

The FMC161 provides one 12-bit A/D channel at 3.6Gsps or two A/D channels at 1.8Gsps clocked by either an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. In addition, a trigger input for customized sampling control is available to users. The FMC161 daughter card is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4-channel ADC Module

FMC140 - Sundance Multiprocessor Technology Ltd.

The FMC140 is an analog-to-digital (A/D) FMC daughter card that provides four 16-bit A/D channels at 370MSPS which can be clocked by an internal clock source (optionally locked to an external reference) or by an externally-supplied sample clock. A trigger input is also available for customized sampling control. The FMC140 is mechanically and electrically compliant to the FMC standard (ANSI/VITA 57.1-2010). It offers front panel analog I/O access and can be used in a conduction-cooled environment.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4-Channel ADC Module

FMC126 - Sundance Multiprocessor Technology Ltd.

The FMC126 is a Quad-Channel Multi-Mode A/D FMC, fully compliant with VITA 57.1 Standards. The card provides four 10-bit ADC channels that enable simultaneous sampling of 4, 2, or 1 channel with a maximum sample rate of 1.25 GSPS (4-channel mode), 2.5 GSPS (2-channel mode), or 5.0 GSPS (1-channel mode).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4-Channel ADC Module

FMC125 - Sundance Multiprocessor Technology Ltd.

The FMC125 is a Quad-Channel Multi-Mode A/D FMC, fully compliant with VITA 57.1 Standards. The card provides four 8-bit ADC channels that enable simultaneous sampling of 4, 2, or 1 channel with a maximum sample rate of 1.25 GSPS (4-channel mode), 2.5 GSPS (2-channel mode), or 5.0 GSPS (1-channel mode).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

2-Channel ADC Module

FMC122 - Sundance Multiprocessor Technology Ltd.

The FMC122 is a Dual-Channel Multi-Mode A/D FMC, fully compliant with VITA 57.1 Standards. The card provides two 8-bit ADC channels that enable simultaneous sampling of 2 or 1 channel with a maximum sample rate of 1.25 GSPS (2-channel mode) or 2.5 GSPS (1-channel mode).

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

16-Channel ADC Module

FMC116 - Sundance Multiprocessor Technology Ltd.

The FMC116 is a sixteen-channel ADC FMC Daughter Card which is fully compliant with the VITA 57.1-2008 standard. The FMC116 provides sixteen A/D 14-bit 125Msps channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available. The FMC116 has the HPC (high-pin count) connector, front panel I/O, and is conduction cooled capable.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

12-Channel ADC Module

FMC112 - Sundance Multiprocessor Technology Ltd.

The FMC112 is a twelve-channel ADC FMC Daughter Card which is fully compliant with the VITA 57.1-2008 standard. The FMC112 provides twelve A/D 14-bit 125Msps channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available. The FMC112 has the LPC (Low-Pin Count) connector, front panel I/O, and is conduction cooled capable.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

8-Channel ADC Module

FMC108 - Sundance Multiprocessor Technology Ltd.

The FMC108 is an eight-channel ADC FMC (FPGA Mezzanine Card) which is fully compliant with the VITA 57.1-2010 standard. The FMC108 card provides eight A/D 14-bit 250MSPS channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available. The FMC108 has the HPC (high-pin count) connector, front panel I/O, and is conduction cooled compliant. The board is also available with Mil-I-46058c compliant Conformal Coating.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

8-Channel ADC Module

FMC107 - Sundance Multiprocessor Technology Ltd.

The FMC107 is an eight-channel ADC FMC (FPGA Mezzanine Card) which is fully compliant with the VITA 57.1-2010 standard. The FMC107 card provides eight 12-bit 65 MSPS A/D channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available. The FMC107 has the LPC (Low-Pin Count) 160-Pin connector, front panel I/O, and is conduction cooled compliant. The board is also available with Mil-I-46058c compliant Conformal Coating.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4-Channel ADC FMC Module

FMC103 – LPC - Sundance Multiprocessor Technology Ltd.

The FMC103 is a four-channel ADC FMC (FPGA Mezzanine Card) which is fully compliant with the VITA 57.1-2010 standard. The FMC103 card provides four 12-bit 210 MSPS A/D channels which can be sampled by an internal clock source (optionally locked to an external reference) or an externally supplied sample clock. A trigger input for customized sampling control is also available. The FMC103 has the LPC (Low-Pin Count) 160-Pin connector, front panel I/O, and is conduction cooled compliant. The board is also available with Mil-I-46058c compliant Conformal Coating.

Product Home Contact/Sales Distributors/Reps Company Catalog Share Add To List

4-Channel ADC Module

Topics