VME Backplanes

VMEbus High Performance SUN J3 Backplane. Available in slot sizes from 2 to 21 slots. A & C rows provide 25 pins for +5V; 25 pins for Ground 4 pins for +12V; 4 pins for -12V. Low inductance power feed provides excellent interplane capacitance. Power bugs, Mate-N-Lok*, or MTA power feed systems available on all backplane sizes. Busbar avail ...more

Wallmount/Rackmount, 3U/6U, 19 inch enclosures, backplanes and power supplies ...more

The SC109 is a fully configurable RF switch system. One or more card can be configured into a system to realize the number of channels and performance required. Regardless of the number of cards utilized, the system remains completely programmable through a single RS-232 two wire interface port, or through the VME/VXI backplane. Units can be packag ...more

The Slot Load Board can be used to identify the characteristics of system power, backplane power, and backplane signals. System thermal analysis can also be accomplished using the Slot Load Board, providing valuable information regarding cooling studies, variable heat load, and hot spot evaluation ...more

VMEbus High Performance SUN J2 Backplane. Low end to end DC trace resistance for minimal noise level. Low inductance power feed provides excellent interplane capacitance. 64MHz+ performance. Isolation networks between signals minimize crosstalk ...more

All Elma Bustronic VME backplanes are designed to maximize performance, minimize noise, and to give the customer the most reliable, cost-effective product possible. To achieve this we use 8-layer construction, strip-line design, decoupling capacitors at every slot, inboard terminators, heavy power and ground planes, transient analysis simulati ...more

The Elma Bustronic 6U VME64x backplane series is designed to fully comply with the ANS/VITA VME extension standard. We provide all standard features required for VME64x compatibility, including 160-pin VME extension connectors in J1 and J2, all defined ground pins connected to a ground plane, routing and termination of all VME and VME64x busse ...more

The J1, J2, and J3 (J0) VME backplanes come in 3U heights and various slot sizes. The J2 versions can also have the A+C rows bussed.  ...more

The Elma Bustronic 7U VME64x backplane series is designed to fully comply with the ANSI/VITA VME extension standard. The extra 1U of height provides room for extra power bugs. The 7U version is also compliant to the VITA 1.7 Increased Current Specification.  ...more

The ST-201 VME Backplane Monitor, powered by ITCN?s Real-Time Trace technology, is designed for use in VME 32 and 64 systems. The ST-201 is capable of monitoring and recording activity on all four VME backplane busses (Data Transfer Bus (DTB), Arbitration Bus, Interrupt Bus, and Utility Bus). This allows the analysis of data transfers between ...more

The RSYS10 chassis is designed to meet the needs of military and especially space applications where extreme stiffness, weight saving together with conduction cooling are required. The housing is manufactured from Aluminium using the dip brazing technology - guaranteeing by this maximum ruggedness at minimum weight. The chassis can be equipped ...more

The clone 2 chassis is designed to meet the needs of rugged and especially space applications where extreme stiffness, low weight together with conduction cooling are required. The housing is manufactured from Aluminium using the dip brazing technology - guaranteeing by this maximum ruggedness at minimum weight. The chassis can be equipped wit ...more

6U VMEBus Single Board Computer hosts a MCP7447A G4 PowerPC processor, up to 1 GB of DDR SDRAM and two Gigabit Ethernet ports. The VS2 includes RS-232 and RS-422 serial ports, an IEEE-1386.1-compatible PMC expansion site, and 11 single-ended general-purpose ports at the backplane. The VME Bus Bridge support the 2eSST protocol.Board is availabl ...more

The RCOM06 chassis is designed to meet the needs of rugged and especially space applications where extreme stiffness, low weight together with conduction cooling are required. The housing is manufactured from Aluminium using the dip brazing technology - guaranteeing by this maximum ruggedness at minimum weight. The chassis can be equipped with ...more

The RSYS05 chassis is designed to meet the needs of military and especially space applications where extreme stiffness, low weight together with conduction cooling are required. The housing is manufactured from Aluminium using the dip brazing technology - guaranteeing by this maximum ruggedness at minimum weight. The chassis can be equipped wi ...more

The chassis houses a five-slot 6U VME64X backplane accommodating up to five top-loaded conduction cooled 6U VME boards, including power supply, and a 300W 28VDC plug in power supply that is MIL-STD-704D and MIL-STD-461C compliant. The chassis? removable surfaces are provided with environmental/EMI gaskets, which protect internal electronic ass ...more

Number of layers: 10. 5, 7, 9, 10, 12, 21 slots. Installation height 6U/6.5U with 64-bit data width. Layer structure: Optimized for best RF protection. Outer layers designed as shielding surface. PCB thickness: 4.3 mm. Ohmic resistance of signal lines: < 1.5 Ohm. Surge impedance Z of signal lines: 50 Ohm. Basic current consumption with acti ...more

The continuing need for more bandwidth in VMEbus environments drove some teams to think about using networking technology, and Ethernet was a logical choice for a backplane data transport. ANSI/VITA 31.1, Gigabit Ethernet on VME64x, adds GigE to backplanes via a P0 connector as defined in VME64x. ...more

Comtel?s VME64x Backplane range implements innovative and beneficial features. Building on the success of Comtel?s VME SMT backplanes, Comtel designs and manufactures standard and fully custom-specific VME64x Backplanes. Comtel offers a large variety of VME64x Backplanes, 2-21 slots  ...more

The PS3350 is a high-performance power supply for use in 6U. CompactPCI computer, test, and telecom systems. The PS3350 meets all of the requirements of the PICMG. CompactPCI Specification, while offering N+1 redundancy and being fully hot swappable. High-density cooling fins are positioned directly in the airstream. All input and output conne ...more

Outer layers designed as shielding surface.  Layer structure: Optimized for best RF protection. Surge impedance Z of signal lines: 60 Ohm.  ...more

Comtel designs and manufactures standard and fully custom-specific VME & VME64x Systems. Comtel offers a large variety of VME & VME64x Systems, 3-21slots. If you have a requirement for VME, VME64x, VXI & VXS Backplanes and/or Systems ...more

The Outreach PCI/PMC Expansion System allows system integrators to exploit an industry-standard PCI interface for high performance board-to-board interconnects. Using Outreach, system integrators can interface VME processor cards to custom I/O cards via a PCI connection as well as expand the number of PMC modules attached to one VME processor ...more

VXS provides the high-speed switched serial performance of VITA 41 in a versatile 8 & 21 slot, hybrid design includes VXS payload slots, VXS switch slots and conventional VME64x slots, The 8 & 21 slot VXS (VITA 41) backplanes supports data rates well beyond 3.125Gb/s per link. As a dual-star design, it can be operated with one or two s ...more

The PS3380 is a Power Entry Module (PEM) designed to provide filtered -48 V DC power to a backplane. These are 6U, 8HP wide boards which connect to the backplane through a rear side blind mating connector. ...more