Satellite Test

The MDU Signal Level Meter measures digital and analog signals up to 2.15 GHz. It was designed for DBS, MMDS, SMATV, and CATV applications. Straightforward layout makes the MDU the industry's most user-friendly digital measuring SLM. Rugged construction and strong batteries also differentiate the MDU from other meters. The compact weather resi ...more

With Anue's CHASSIS, LINE CARD, and SOFTWARE LOAD building blocks, many different combination systems can be configured. For example, a Network Emulator can contain both Gigabit Ethernet and Fibre Channel Signal Delay and impairment capability, or SONET Signal Delay and Path Delay capability, etc. • WAN testing • VoIP network testing • Ether ...more

IGISAT II got a third mode for checking the different ECHOSTAR "Dish Network" DishSwitch commands. They are displayed on the red LED´s like this: The unit is an excellent tool for the american market as it can: find an maximize KU- and C-band satellites work as a voltmeter (measure 11-20 volt DC, 5-500mA) and test receivers, LNB´s, switches etc. ...more

Ideal for testing repeater locations where satellites are blocked by buildings. Power out control from 1 to 10 watts. Frequency Selection in 1 MHz steps. Rugged, weatherized container with forced air cooling ...more

The Megger MGTR is a GPS satellite receiver system that performs end-to-end tests of line protection schemes with Megger MPRT and Pulsar relay test systems.  ...more

Water-cooled, electrodynamic shaker built for use with vibration tables capabale of testing large payloads such as satellites, aerospace assemblies and munitions up to 5 tonnes mass with a maximum sine force rating of 90 kN (20000 lbf).  ...more

Test System R&S TS9980 has been designed for automatic measurement of the electromagnetic susceptibility of sound broadcast and TV receivers to EN 55020 and CISPR 20 standards. More than 60 systems have been sold worldwide! As part of ongoing technical development, system solutions for satellite receivers as well as DVB receivers and Set-T ...more

Function Test 1GS/s analog Function Test 300 MS/s digital In-Circuit Test, max. 720 points Full Graphic User Interface Repair Station Extended Statistics CAE CAD Converter Parallel Test > 2500 parts/s ...more

Analog and digital TV multistandard broadcast test platform with signals for antenna, satellite and cable. Source for all your RF signals in DVB-H, DVB-T, DVB-C, US Cable QAM (ITU-T J.83 /B), ATSC 8VSB, ISDB-T, DVB-S, DVB-S2, DirecTV® (DSS) and DMB-T, but it can also generate the MPEG-2 Transport Stream, add Noise, Phase Noise and Static or Dynamic ...more

Pico Macoms DSM1 Dual Satellite Signal Level Meter is a full-featured handheld satellite IF meter providing a complete testing system in a convenient easy-to-carry protective case. The DSM1 enables testing and alignment of single or multiple satellite antennae and associated cabling. ...more

Testing satellites, avionics, military electronics, hazardous materials and combined space simulation are typical of the complex applications satisfied by LDS’ V900 series of vibration test systems ...more

Tampa Microwave loop test translators are designed to allow a satellite to be "short circuited" so terminal output can be fed to down link monitoring equipment. Tampa Microwave LTT's are designed for applications where frequency translation is needed with a minimum of amplitude and delay distortions.  ...more

An experimental test bed simulator is used by engineering personnel to perform various satellite communication traffic experiments. The system has an active and a passive channel. The active channel uses DSP to improve the bit-error-rate. The passive circuit is simply a bent-pipe configuration. ...more

TV Test Transmitter R&S SFQ is a complete solution for testing digital TV links and receivers. The open-end software and modular hardware make the R&S SFQ future-proof. The standards for DVB-T, DVB-S/DVB-DSNG, turbocoding, DVB-C, J.83B and ATSC/8VSB are fully complied with. Thanks to its adaptability to future system changes, R&S S ...more

The BRAT Option 535 is an option to the BRAT Test System utilizing Commercial-Off-The-Shelf (COTS) equipment. The system is used to augment the existing BRAT capabilities to test Satellite Communications (SATCOM) equipment. In addition, the BRAT Option 535 Test System will test communication equipment at various IF frequencies in the UHF, L, X, and ...more

Protek 7830 Handheld Spectrum Analyzer is a compact, lightweight, portable, and cost-effective equipment with various measurement functions such as Marker, Delta Marker, Peak Search, Channel Power measurement etc. It is the ideal tool for field RF technicians to test, install and maintain Wireless Mobile Telecommunications Systems, Cable Syste ...more

NTS provides a barrage of tests associated with satellite technology. Our focus lies typically with fuel tanks, solar panels, electronics, composite antennas, pressure vessels, batteries and mechanical devices. We can custom engineer any test to include vibration (table surfaces up to 100 sq. feet), acceleration, shock, climatics and aging (-3 ...more

Tampa Microwave loop test translators are designed to allow a satellite to be "short circuited" so terminal output can be fed to down link monitoring equipment. Tampa Microwave LTT's are designed for applications where frequency translation is needed with a minimum of amplitude and delay distortions. ...more

Testing satellites, avionics, military electronics, hazardous materials and combined space simulation are typical of the complex applications satisfied by LDS’ V900 series of vibration test systems. Used worldwide in clean room (can be certified to federal standard 209 Class 100000) and controlled environments, they combine closed loop w ...more

Design and manufacture discretely wired and wireless test fixtures used for performance verification of PCB’s and Electronic Assemblies. Commercial applications have included work in support of many industries including satellite TV/IP, computer servers, medical, networking and telecom. We have also developed highly customized ITA’s (Interface Test ...more

Square Peg Communications Inc.’s second-generation Physical Layer Tester (PLT-H) is a generic PC based test tool which supports the testing and type approval of mobile terminals and base stations for various satellite or wireless communications networks. ...more

PCI-Based Serial I/O Board With Reed-Solomon Encoder/Decoder. Easily implement front-end functions critical to satellite ground, spacecraft test, and flight/range test applications with Monarch-E, a real-time data packet processing engine that supports bi-directional frame processing of serial data at up to 25 Mbps. ...more

The DM100 Dolby® Bitstream Analyzer is a uniquely efficient tool for end-to-end system testing. With its built-in test-signal generator, the DM100 allows audio system integrators and service engineers to quickly monitor and check the integrity and composition of Dolby Digital, Dolby E, and PCM signals routed through production, broadcast, cable, an ...more

VTS500 video test system provides real-time analysis, enhanced play/record features, and offline analysis tools for satellite, terrestrial, cable, IPTV, and mobile TV operators. The VTS500 performs MDI, EPG, bit-rate, and syntax analysis to provide fast diagnostics and verification of MPEG designs. It is available in a portable or 3 RU chassis. ...more

ERZIA Space can design and manufacture RF units for Electrical Ground Support Equipment (EGSE), used for testing satellite payloads and Telemetry & Telecommand Communications (TT&C). A ...more