Phase Noise Test

This is a custom made part of a Phase Noise test system. It contains relays, filters, amplifiers, and so on. It works with other of-the-shelf eqipment, and custom software to form a high volume production test system.  ...more

The model SG - 1710 is a high-performance general purpose signal generator. It covers the frequency range from 200kHz to 1GHz with low phase noise and FM/AM modulation. This product is designed to match with automatic test system and ideally suitable for various test tasks like developing and manufacturing of RF communication product. ...more

Low Noise Floor(-117dBm@1GHz, 3k RBW). Autoset Function. Sequence Programming Functions. ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements. Pass/Fail Test with Limit Line Editing. 5 Markers with Delta Marker, Peak Functions  ...more

Symmetricom?s 5120A brings a paradigm shift to the way that phase noise and Allan Deviation (ADEV) measurements are made. With the all-digital 5120A, measurements that used to be complicated and costly are now easier, more accurate, and more cost effective.  ...more

The 5115A Phase Noise and Allan Deviation Test Set directly samples the RF inputs and performs all phase difference, phase noise, and Allan deviation calculations numerically. It is self-configuring, self-calibrating, requires no external phase-lock loop, and allows the oscillator under test and reference to have different frequencies. No add ...more

Now in its third generation, the APTS three-phase protection relay test set is the flagship multipurpose relay test set manufactured by RES. The APTS utilises the latest digital signal processing based waveform synthesis techniques coupled with advanced low-noise switching amplifier technology. ...more

The MiniSonic MS1/MS10 Audio Analyser/Studio Aid is a complete, hand held, two-channel analogue audio test set that measures frequency, frequency response, phase, level, noise, distortion, crosstalk, speed and path latency (delay). As well as being a quality tester it's a precision line-up tool, a stereo PPM, a balanced-unbalanced convertor (both w ...more

The SEL Adaptive Multichannel Source provides 12 analog outputs for waveforms with transient data or steady-state sinusoids. Twelve channels allow you to simulate the phase currents and voltages at both ends of an electrical transmission line. Six digital inputs sense contact status to change test states and monitor the equipment under test. Te ...more

Aeroflex brings high performance phase noise testing capability into a new era with the PN8000, a low cost automated phase noise test system. The PN8000 is designed for manufacturers of crystal oscillators, synthesizers and PLL (phase lock loop) components who do not need the additional performance of the options available in the PN9000 or PN9 ...more

All the benefits of the 2945B but with a low phase noise signal generator, for more critical receiver testing. ...more

The PN9000 is a simple and fast Automatic Phase Noise Test System covering a very wide frequency range (2 MHz to 140 GHz). Its modular architecture allows optimum configuration, multiple measurement techniques and future growth in a compact instrument ...more

The new 50 GHz microwave down converter touts the industryâ??s best noise performance. Until now, there have been no commercial microwave down converters that provide the unparalleled combination of high bandwidth with low noise performance suited for radar, commercial wireless, satellite terrestrial microwave links and calibration labs ...more

The PN9002 is a unique test system for the design and manufacturing of radar systems. Fast, compact and fully automated, the PN9002 is a stand-alone system, ideal for radar stability measurements. ...more

The modular design of the PN9500 issued from the PN9000 product line provides versatility and flexibility to set up the appropriate configuration to measure any kind of frequency source from 2 MHz to 140 GHz. ...more

Amkor development centers provide complete engineering services from program development, full product characterization to production ramp. Amkor has an extensive team of senior test engineers with experience in mixed-signal, memory, high-end digital, power management and RF. Reliability and prototype production testing are also supported in these ...more

Analog and digital TV multistandard broadcast test platform with signals for antenna, satellite and cable. Source for all your RF signals in DVB-H, DVB-T, DVB-C, US Cable QAM (ITU-T J.83 /B), ATSC 8VSB, ISDB-T, DVB-S, DVB-S2, DirecTV® (DSS) and DMB-T, but it can also generate the MPEG-2 Transport Stream, add Noise, Phase Noise and Static or Dynamic ...more

FEATURES: Simulation of 26 AWG PIC from 0 – 20.5 kft in 500-ft increments as specified in ANSI T1.413; Plugs into Model 458-2SL or 458-CC; Accurately reflects attenuation, impedance, phase and delay; Low Noise Floor/ Low Cross Talk; One-Year Warranty/Calibration. The Model 458-LM-20 Line Module accurately reflects the copper-pair cable characterist ...more

The PNG7000 Series instruments generate additive white Gaussian noise and provide a summing input to perform signal-to-noise or carrier-to-noise ratio testing capability. A key feature of this instrument is its low distortion signal path which sums the user-supplied signal with the internal precision white noise source. The si ...more

Model 8550 is an extremely high performance programmable function generator. It provides a variety of signal waveforms to be used as test stimuli for a diversity of electronic devices. For improved immunity to RFI and EMI noise, the instrument is housed in an all-round metal case. The Model 8550 offers many features and functions. such as enha ...more

Output attenuator. Low Phase Noise Contribution. Weather Resistant Enclosure. Lock Alarm Indication. Optional RS 485 ...more

X-BAND PHASE NOISE HIGH POWER RF TEST SYSTEM. The BRAT Option B512 is an option to the BRAT Test System utilizing Commercial-Off-The-Shelf (COTS) equipment. The system is used to augment the existing BRAT capabilities to test high power RF systems and measure X-band phase noise. The X-Band Phase Noise High Power RF Test System is a transportab ...more

The Micro Lambda low noise, extreme wide band Fundamental YIG Tuned Oscillators cover the frequency band of 2-18 and 2-20 GHz. This oscillator series offers SUPERIOR PHASE NOISE performance of –112 dBc/Hz @ 100 kHz offset at 18 GHz and –107 dBc/Hz at 20 GHz. They make ideal local oscillators for synthesizers, receivers, sweep generators and other s ...more

FEATURES: Simulation of 0.4 mm PE as specified in ITU-T G.996.1, ETSI ETR 328 and ETSI TS 101 388; 0 – 6.15 km in 150-m increments; Plugs into Model 458-2SL or 458-CC; Accurately reflects attenuation, impedance, phase and delay; Low Noise Floor/ Low Cross Talk; One-Year Warranty/Calibration. The Model 458-LM-E20 Line Module accurately reflects the ...more

New Anritsu synthesizer technology permits frequencies to be set with a resolution of 0.01 Hz across the full frequency range. And the non-harmonic spurious is better than ?100 dBc for reliable measurement at any frequency. A unique low-noise YIG oscillator produces a high-purity signal with SSB phase noise of better than ?130 dBc/Hz (1 GHz, 2 ...more

The new 2520GTA series signal generator delivers extremely fast switching speeds, high output power, and low residual phase noise in a single unit. The 2520GTA series signal generator is offered in a frequency range of 100 MHz to 20 GHz with a frequency resolution of 0.001 Hz over the entire band. Loaded with standard performance features such as h ...more