Instrument Cables

Enable a single technician to perform return band alignment with this easy to use return band alignment system for CATV. This system consists of a headend signal level receiver/telemetry transmitter (the HECTER 6103) and a small, field portable, dual-carrier signal generator/telemetry receiver unit (HECTER'S PUP 6106). ...more

VPCs Wire Plus program is designed to enable quick and easy custom test system configurations by providing finished system cable solutions in modules; wired, PCB, breadboard and umbilical cords . This eliminates the time and expense of hand-crimping each contact and promotes rapid integration of your Mass InterConnect system with virtually any ...more

The Model 1685 is a headend/hubsite RF eight-carrier generator. Each CW carrier can be activated individually or simultaneously. The RF carriers generated are extremely clean and stable, thus making the 1685 an ideal instrument for testing/aligning the CATV forward band. ...more

The Model 7153 is designed to switch low level, high voltage, and high impedance signals for applications such as parametric tests on semiconductor devices. The 7153 allows signal levels up to 1300V while maintaining offset current of 1013O. Each crosspoint is a 2-pole relay to switch both signal and guard. Interconnect between the matrix and ...more

The Planet Waves Cable Cutter/Tester is the fast and easy helper in constructing your instrument and audio cables. Designed to work with Planet Waves RCA and 1/4” Coaxial Cables,the unit not only cuts cable with ease and accuracy, but also tests for shorts and proper tip and ground connections for 1/4” and RCA cables ...more

The QM Analogue Backplane achieves high integrity, maximises operational use of instruments, minimises cables and connections. QM Systems has developed a modular Interface System for routing signals. The high integrity backplane routes signals for measurement or stimulus. ...more

Instrument for circuit phasing / potential testing and URD cable testing. 0- 40 kV tester kit. ...more

The RDS-1RM is an automatic-loss-of-signal A/B switch. It enhances a CATV system's reliability utilizing redundancy. The RDS-1RM monitors the amplitude of an RF carrier. If the amplitude of that carrier is not within the acceptable-range, the RDS-1RM will switch to an alternate signal source. ...more

The RPS-4 and RPS 4+4 are versatile RF switches that satisfy may headend/hubiste program switching requirements. Their ability to handle high frequency switching remotely or manually most differentiate the RPS-4s from other switches. ...more

The ICMmonitor is an instrument to monitor permanently the partial discharge activity of various high voltage aparatus, such as rotating machines, cable systems, power transformers, or gas-insulated switch gear (GIS). The ICMmonitor is adapted to the various requirements of these different tasks by means of specialized coupling units, preamplif ...more

The Extender488 enables instruments to be located up to 4,000 feet from host IEEE controller. Overcomes the 20 meter cable limitation imposed by the IEEE standard by economically extending the bus up to 1,000 meters via RS-422 or fiber optic  ...more

The MIC-2500 is a small, portable meter for measuring the insulation resistance of electrical and telecommunication installations, cables, transformers, motors, machines and other devices. The measuring voltage can be programmed with 10V step. The instruments can measure both: the insulation resistance in a very wide range 50kO..1,1TO (1100GO) and ...more

The CMP-1000 meter is a portable instrument for direct measuring of alternate and direct current up to 1000 A. The meter, when used with additional measurement cables, enables measuring the AC/DC voltage. It can also measure frequence, capacitance and resistance with acoustic continuous signal. ...more

The purpose of the PG 100 is to provide a pulse with a relatively fast risetime that, with an oscilloscope, can make quick time-domain measurements of cables and other components around the lab.  Measurements of this kind will have a tolerance of about 5%.  While more accurate measurements can be made with other instruments, this is an inexpe ...more

The Throwmaster Cable Test Set Model 105 is the primary instrument used by telephone company technicians for testing and transfer operations on both metallic and pair gain types of service. ...more

LCM is a unique portable equipment for leakage current measurements is developed for in-service measurements of the resistive component of the continuous leakage current of gapless metal oxide surge arresters (MOSA's). The Leakage Current Monitor system (LCM) is connected to the arrester and it consists of three main parts: A current probe att ...more

ST620 Cable Fault Locator is a portable field instrument working on TDR and bridge methods, adopting advanced micro-electronics technology. It is designed to locate accurate fault points in such cables as telecommunication leadsheathed cable, plastic cable or user’s lead covered wire, while the faults include break, mix, earthing, defective insulat ...more

Willtek's new 9102 Handheld Spectrum Analyzer is a multifunction instrument designed for lab and field applications concerning scalar network and spectrum analysis, including cable and antenna measurements and EMC pre-qualification tests. The basic 9102 has a frequency range of 100 kHz to 4 GHz and a resolution bandwidth (RBW) of an exceptional ...more

The Throwmaster Cable Test Set Model 102A is a portable, battery- powered instrument for field testing telephone cable pairs. It is normally used by technicians as their primary test set ...more

The MIC-1000 is a small, portable meter for measuring the insulation resistance of electrical and telecommunication installations, cables, transformers, motors, machines and other devices. The measuring voltage can be programmed with 10V step. The instruments can measure both: the insulation resistance in a very wide range 50kO..110GO (110 000MO) a ...more

The MIC-3R meter is a small, portable instrument for measuring the insulation resistance of electrical installations, cables, transformers, motors and other devices. It can measure the protective circuits and junctions' continuity with the test current I>200mA. The meter enables the low-voltage measurements of low resistances with beeper signalizat ...more

The Model 1212 Current Preamplifier is designed as a low cost, gerenal purpose, benchtop instrument to provide a high performance detection system for small ac and dc currents. The 1212 operates with a virtual ground at its input which mitigates unpredictable high frequency rolloff due to input cables and stray capacitance. ...more

The Extender488 enables instruments to be located up to 4,000 feet from host IEEE controller. Overcomes the 20 meter cable limitation imposed by the IEEE standard by economically extending the bus up to 1,000 meters via RS-422 or fiber optic  ...more

The CMP-2 meter is a small portable instrument for direct measuring of AC/DC current up to 400 A. The meter, when used with additional measurement cables, enables measuring the AC/DC voltage up to 600V. It can also measure resistance with acoustic continuous signal. ...more

With ADAM 3000 Schomandl presents a measure instrument of the latest generation in compact mounting form, tabletop unit and also as black box, which leaves nothing to be desired for tests of antenna- and cable-installations, even including professional head ends. ...more